On 22.03.2024 09:01, Luca Weiss wrote:
> Add the required DTS node for the USB VBUS output regulator, which is
> available on PM7250B. This will provide the VBUS source to connected
> peripherals.
>
> Signed-off-by: Luca Weiss <luca.we...@fairphone.com>
> ---
> arch/arm64/boot/dts/qcom/pm7250b.dtsi | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/pm7250b.dtsi
> b/arch/arm64/boot/dts/qcom/pm7250b.dtsi
> index 3bf7cf5d1700..91a046b3529c 100644
> --- a/arch/arm64/boot/dts/qcom/pm7250b.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm7250b.dtsi
> @@ -45,6 +45,12 @@ pmic@PM7250B_SID {
> #address-cells = <1>;
> #size-cells = <0>;
>
> + pm7250b_vbus: usb-vbus-regulator@1100 {
> + compatible = "qcom,pm7250b-vbus-reg",
> "qcom,pm8150b-vbus-reg";
> + status = "disabled";
> + reg = <0x1100>;
Could you fix the ordering here?
Konrad
