On 3/25/24 12:20, Andrew Davis wrote:
static int omap_mbox_chan_send_noirq(struct omap_mbox *mbox, u32 msg)
{
- int ret = -EBUSY;
+ if (mbox_fifo_full(mbox))
+ return -EBUSY;
- if (!mbox_fifo_full(mbox)) {
- omap_mbox_enable_irq(mbox, IRQ_RX);
- mbox_fifo_write(mbox, msg);
- ret = 0;
- omap_mbox_disable_irq(mbox, IRQ_RX);
+ omap_mbox_enable_irq(mbox, IRQ_RX);
+ mbox_fifo_write(mbox, msg);
+ omap_mbox_disable_irq(mbox, IRQ_RX);
- /* we must read and ack the interrupt directly from here */
- mbox_fifo_read(mbox);
- ack_mbox_irq(mbox, IRQ_RX);
- }
+ /* we must read and ack the interrupt directly from here */
+ mbox_fifo_read(mbox);
+ ack_mbox_irq(mbox, IRQ_RX);
- return ret;
+ return 0;
}
Is n't the interrupt supposed to be IRQ_TX above? i.e TX ready signal?
