On Fri, Jun 21, 2024 at 05:16:53PM GMT, Gokul Sriram Palanisamy wrote:
> IPQ8074 uses secure PIL. Hence, adding the support for the same.
See Documentation/process/submitting-patches.rst
>
> Signed-off-by: Nikhil Prakash V <quic_nprak...@quicinc.com>
> Signed-off-by: Sricharan R <quic_srich...@quicinc.com>
> Signed-off-by: Gokul Sriram Palanisamy <quic_gokul...@quicinc.com>
> ---
> drivers/remoteproc/qcom_q6v5_wcss.c | 43 +++++++++++++++++++++++++++--
> 1 file changed, 40 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/remoteproc/qcom_q6v5_wcss.c
> b/drivers/remoteproc/qcom_q6v5_wcss.c
> index 366b19cbd994..e45e79d80238 100644
> --- a/drivers/remoteproc/qcom_q6v5_wcss.c
> +++ b/drivers/remoteproc/qcom_q6v5_wcss.c
> @@ -18,6 +18,7 @@
> #include <linux/regulator/consumer.h>
> #include <linux/reset.h>
> #include <linux/soc/qcom/mdt_loader.h>
> +#include <linux/firmware/qcom/qcom_scm.h>
> #include "qcom_common.h"
> #include "qcom_pil_info.h"
> #include "qcom_q6v5.h"
> @@ -86,6 +87,9 @@
> #define TCSR_WCSS_CLK_ENABLE 0x14
>
> #define MAX_HALT_REG 3
> +
> +#define WCNSS_PAS_ID 6
> +
> enum {
> WCSS_IPQ8074,
> WCSS_QCS404,
> @@ -134,6 +138,7 @@ struct q6v5_wcss {
> unsigned int crash_reason_smem;
> u32 version;
> bool requires_force_stop;
> + bool need_mem_protection;
needs
>
> struct qcom_rproc_glink glink_subdev;
> struct qcom_rproc_ssr ssr_subdev;
> @@ -152,6 +157,7 @@ struct wcss_data {
> int ssctl_id;
> const struct rproc_ops *ops;
> bool requires_force_stop;
> + bool need_mem_protection;
needs
> };
>
> static int q6v5_wcss_reset(struct q6v5_wcss *wcss)
> @@ -251,6 +257,15 @@ static int q6v5_wcss_start(struct rproc *rproc)
>
> qcom_q6v5_prepare(&wcss->q6v5);
>
> + if (wcss->need_mem_protection) {
> + ret = qcom_scm_pas_auth_and_reset(WCNSS_PAS_ID);
> + if (ret) {
> + dev_err(wcss->dev, "wcss_reset failed\n");
> + return ret;
> + }
> + goto wait_for_reset;
> + }
Use if/else instead of a goto.
> +
> /* Release Q6 and WCSS reset */
> ret = reset_control_deassert(wcss->wcss_reset);
> if (ret) {
> @@ -285,6 +300,7 @@ static int q6v5_wcss_start(struct rproc *rproc)
> if (ret)
> goto wcss_q6_reset;
>
> +wait_for_reset:
This is more like wait_for_start
> ret = qcom_q6v5_wait_for_start(&wcss->q6v5, 5 * HZ);
> if (ret == -ETIMEDOUT)
> dev_err(wcss->dev, "start timed out\n");
> @@ -718,6 +734,15 @@ static int q6v5_wcss_stop(struct rproc *rproc)
> struct q6v5_wcss *wcss = rproc->priv;
> int ret;
>
> + if (wcss->need_mem_protection) {
> + ret = qcom_scm_pas_shutdown(WCNSS_PAS_ID);
> + if (ret) {
> + dev_err(wcss->dev, "not able to shutdown\n");
> + return ret;
> + }
> + goto pas_done;
> + }
if/else. Or abstract this to functions.
> +
> /* WCSS powerdown */
> if (wcss->requires_force_stop) {
> ret = qcom_q6v5_request_stop(&wcss->q6v5, NULL);
> @@ -742,6 +767,7 @@ static int q6v5_wcss_stop(struct rproc *rproc)
> return ret;
> }
>
> +pas_done:
> clk_disable_unprepare(wcss->prng_clk);
> qcom_q6v5_unprepare(&wcss->q6v5);
>
> @@ -765,9 +791,15 @@ static int q6v5_wcss_load(struct rproc *rproc, const
> struct firmware *fw)
> struct q6v5_wcss *wcss = rproc->priv;
> int ret;
>
> - ret = qcom_mdt_load_no_init(wcss->dev, fw, rproc->firmware,
> - 0, wcss->mem_region, wcss->mem_phys,
> - wcss->mem_size, &wcss->mem_reloc);
> + if (wcss->need_mem_protection)
> + ret = qcom_mdt_load(wcss->dev, fw, rproc->firmware,
> + WCNSS_PAS_ID, wcss->mem_region,
> + wcss->mem_phys, wcss->mem_size,
> + &wcss->mem_reloc);
> + else
> + ret = qcom_mdt_load_no_init(wcss->dev, fw, rproc->firmware,
> + 0, wcss->mem_region, wcss->mem_phys,
> + wcss->mem_size, &wcss->mem_reloc);
> if (ret)
> return ret;
>
> @@ -1035,6 +1067,9 @@ static int q6v5_wcss_probe(struct platform_device *pdev)
> if (!desc)
> return -EINVAL;
>
> + if (desc->need_mem_protection && !qcom_scm_is_available())
> + return -EPROBE_DEFER;
> +
> rproc = devm_rproc_alloc(&pdev->dev, pdev->name, desc->ops,
> desc->firmware_name, sizeof(*wcss));
> if (!rproc) {
> @@ -1048,6 +1083,7 @@ static int q6v5_wcss_probe(struct platform_device *pdev)
>
> wcss->version = desc->version;
> wcss->requires_force_stop = desc->requires_force_stop;
> + wcss->need_mem_protection = desc->need_mem_protection;
>
> ret = q6v5_wcss_init_mmio(wcss, pdev);
> if (ret)
> @@ -1111,6 +1147,7 @@ static const struct wcss_data wcss_ipq8074_res_init = {
> .wcss_q6_reset_required = true,
> .ops = &q6v5_wcss_ipq8074_ops,
> .requires_force_stop = true,
> + .need_mem_protection = true,
> };
>
> static const struct wcss_data wcss_qcs404_res_init = {
> --
> 2.34.1
>
--
With best wishes
Dmitry
