From: Cristian Cozzolino <cristian...@protonmail.com>

This commit adds initial support for the LG K10 smartphone.

Support for the following features is included:

- Serial
- Keys
- Battery and charger
- Accelerometer, magnetometer
- Touchscreen
- Sound and modem
- Haptic

Signed-off-by: Cristian Cozzolino <cristian...@protonmail.com>
[Nikita: Minor cleanup]
Signed-off-by: Nikita Travkin <nik...@trvn.ru>
---
 arch/arm64/boot/dts/qcom/Makefile            |   1 +
 arch/arm64/boot/dts/qcom/msm8916-lg-m216.dts | 251 +++++++++++++++++++++++++++
 2 files changed, 252 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/Makefile 
b/arch/arm64/boot/dts/qcom/Makefile
index 5576c7d6ea06..b35e46d75a1d 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -31,6 +31,7 @@ dtb-$(CONFIG_ARCH_QCOM)       += msm8916-alcatel-idol347.dtb
 dtb-$(CONFIG_ARCH_QCOM)        += msm8916-asus-z00l.dtb
 dtb-$(CONFIG_ARCH_QCOM)        += msm8916-gplus-fl8005a.dtb
 dtb-$(CONFIG_ARCH_QCOM)        += msm8916-huawei-g7.dtb
+dtb-$(CONFIG_ARCH_QCOM)        += msm8916-lg-m216.dtb
 dtb-$(CONFIG_ARCH_QCOM)        += msm8916-longcheer-l8150.dtb
 dtb-$(CONFIG_ARCH_QCOM)        += msm8916-longcheer-l8910.dtb
 dtb-$(CONFIG_ARCH_QCOM)        += msm8916-motorola-harpia.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8916-lg-m216.dts 
b/arch/arm64/boot/dts/qcom/msm8916-lg-m216.dts
new file mode 100644
index 000000000000..07345e694f6f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-lg-m216.dts
@@ -0,0 +1,251 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+       model = "LG K10 (K420n)";
+       compatible = "lg,m216", "qcom,msm8916";
+       chassis-type = "handset";
+
+       aliases {
+               mmc0 = &sdhc_1; /* eMMC */
+               mmc1 = &sdhc_2; /* SD card */
+               serial0 = &blsp_uart2;
+       };
+
+       chosen {
+               stdout-path = "serial0";
+       };
+
+       battery: battery {
+               compatible = "simple-battery";
+               voltage-min-design-microvolt = <3300000>;
+               voltage-max-design-microvolt = <4350000>;
+               energy-full-design-microwatt-hours = <8800000>;
+               charge-full-design-microamp-hours = <2300000>;
+
+               ocv-capacity-celsius = <25>;
+               ocv-capacity-table-0 = <4342000 100>, <4266000 95>, <4206000 
90>,
+                       <4148000 85>, <4094000 80>, <4046000 75>, <3994000 70>,
+                       <3956000 65>, <3916000 60>, <3866000 55>, <3831000 50>,
+                       <3808000 45>, <3789000 40>, <3776000 35>, <3769000 30>,
+                       <3760000 25>, <3740000 20>, <3712000 16>, <3684000 13>,
+                       <3676000 11>, <3674000 10>, <3672000 9>, <3669000 8>,
+                       <3665000 7>, <3660000 6>, <3643000 5>, <3602000 4>,
+                       <3542000 3>, <3458000 2>, <3326000 1>, <3000000 0>;
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+
+               pinctrl-0 = <&gpio_keys_default>;
+               pinctrl-names = "default";
+
+               label = "GPIO Buttons";
+
+               volume-up-button {
+                       label = "Volume Up";
+                       gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_VOLUMEUP>;
+               };
+
+               volume-down-button {
+                       label = "Volume Down";
+                       gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_VOLUMEDOWN>;
+               };
+       };
+};
+
+&blsp_i2c2 {
+       status = "okay";
+
+       accelerometer@11 {
+               compatible = "bosch,bmc150_accel";
+               reg = <0x11>;
+
+               interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_RISING>;
+
+               mount-matrix =   "0", "1", "0",
+                               "-1", "0", "0",
+                                "0", "0", "1";
+
+               vdd-supply = <&pm8916_l17>;
+               vddio-supply = <&pm8916_l6>;
+
+               pinctrl-0 = <&accel_int_default>;
+               pinctrl-names = "default";
+       };
+
+       magnetometer@13 {
+               compatible = "bosch,bmc150_magn";
+               reg = <0x13>;
+
+               interrupts-extended = <&tlmm 69 IRQ_TYPE_EDGE_RISING>;
+
+               vdd-supply = <&pm8916_l17>;
+               vddio-supply = <&pm8916_l6>;
+
+               pinctrl-0 = <&magn_int_default>;
+               pinctrl-names = "default";
+       };
+};
+
+&blsp_i2c5 {
+       status = "okay";
+
+       touchscreen@34 {
+               compatible = "melfas,mip4_ts";
+               reg = <0x34>;
+
+               interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>;
+               ce-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+
+               pinctrl-0 = <&touchscreen_default>;
+               pinctrl-names = "default";
+       };
+};
+
+&blsp_uart2 {
+       status = "okay";
+};
+
+&mpss_mem {
+       reg = <0x0 0x86800000 0x0 0x4a00000>;
+};
+
+&pm8916_bms {
+       monitored-battery = <&battery>;
+       power-supplies = <&pm8916_charger>;
+
+       status = "okay";
+};
+
+&pm8916_charger {
+       qcom,fast-charge-safe-current = <700000>;
+       qcom,fast-charge-safe-voltage = <4300000>;
+
+       monitored-battery = <&battery>;
+       status = "okay";
+};
+
+&pm8916_codec {
+       qcom,micbias1-ext-cap;
+       qcom,micbias-lvl = <2800>;
+       qcom,mbhc-vthreshold-low = <75 100 120 180 500>;
+       qcom,mbhc-vthreshold-high = <75 100 120 180 500>;
+       qcom,hphl-jack-type-normally-open;
+};
+
+&pm8916_rpm_regulators {
+       pm8916_l17: l17 {
+               regulator-min-microvolt = <2850000>;
+               regulator-max-microvolt = <2850000>;
+       };
+};
+
+&pm8916_vib {
+       status = "okay";
+};
+
+&sdhc_1 {
+       status = "okay";
+};
+
+&sdhc_2 {
+       pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+       pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+       pinctrl-names = "default", "sleep";
+
+       cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+       status = "okay";
+};
+
+&sound {
+       audio-routing =
+               "AMIC1", "MIC BIAS External1",
+               "AMIC2", "MIC BIAS Internal2",
+               "AMIC3", "MIC BIAS External1";
+};
+
+&usb {
+       dr_mode = "peripheral";
+       extcon = <&pm8916_charger>;
+       status = "okay";
+};
+
+&usb_hs_phy {
+       extcon = <&pm8916_charger>;
+};
+
+&venus {
+       status = "okay";
+};
+
+&venus_mem {
+       status = "okay";
+};
+
+&wcnss {
+       status = "okay";
+};
+
+&wcnss_iris {
+       compatible = "qcom,wcn3620";
+};
+
+&wcnss_mem {
+       status = "okay";
+};
+
+&tlmm {
+       accel_int_default: accel-int-default-state {
+               pins = "gpio115";
+               function = "gpio";
+               drive-strength = <2>;
+               bias-disable;
+       };
+
+       gpio_keys_default: gpio-keys-default-state {
+               pins = "gpio107", "gpio108";
+               function = "gpio";
+               drive-strength = <2>;
+               bias-pull-up;
+       };
+
+       magn_int_default: magn-int-default-state {
+               pins = "gpio69";
+               function = "gpio";
+               drive-strength = <2>;
+               bias-disable;
+       };
+
+       sdc2_cd_default: sdc2-cd-default-state {
+               pins = "gpio38";
+               function = "gpio";
+               drive-strength = <2>;
+               bias-disable;
+       };
+
+       touchscreen_default: touchscreen-default-state {
+               touchscreen-pins {
+                       pins = "gpio13";
+                       function = "gpio";
+                       drive-strength = <2>;
+                       bias-pull-up;
+               };
+
+               ce-pins {
+                       pins = "gpio12";
+                       function = "gpio";
+                       drive-strength = <2>;
+                       bias-disable;
+               };
+       };
+};

-- 
2.45.2


Reply via email to