[PATCH 06/12] arm64: dts: qcom: sm6115-pro1x: Enable MDSS and GPU

[Dang Huynh]

Fxtec Pro1x uses the same display (BOE BF060Y8M-AJ0) as Pro1.

Signed-off-by: Dang Huynh <danc...@riseup.net>
---
 arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 60 +++++++++++++++++++++++--
 1 file changed, 56 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts 
b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
index 42567545f56d..6148cc258164 100644
--- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
+++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
@@ -89,13 +89,16 @@ ts_vddio_supply: ts-vddio-supply {
        };
 };
 
-&dispcc {
-       /* HACK: disable until a panel driver is ready to retain simplefb */
-       status = "disabled";
+&gpi_dma0 {
+       status = "okay";
 };
 
-&gpi_dma0 {
+&gpu {
        status = "okay";
+
+       zap-shader {
+               firmware-name = "qcom/sm6115/Fxtec/QX1050/a610_zap.mbn";
+       };
 };
 
 &i2c1 {
@@ -132,6 +135,42 @@ touchscreen@14 {
        };
 };
 
+&mdss {
+       status = "okay";
+};
+
+&mdss_dsi0 {
+       vdda-supply = <&pm6125_l18a>;
+       status = "okay";
+
+       panel: panel@0 {
+               compatible = "boe,bf060y8m-aj0";
+               reg = <0>;
+
+               reset-gpios = <&tlmm 82 GPIO_ACTIVE_LOW>;
+
+               vddio-supply = <&pm6125_l9a>;
+
+               pinctrl-names = "default";
+               pinctrl-0 = <&mdss_dsi_n &panel_en_n>;
+
+               port {
+                       panel_in: endpoint {
+                               remote-endpoint = <&mdss_dsi0_out>;
+                       };
+               };
+       };
+};
+
+&mdss_dsi0_out {
+       data-lanes = <0 1 2 3>;
+       remote-endpoint = <&panel_in>;
+};
+
+&mdss_dsi0_phy {
+       status = "okay";
+};
+
 &pm6125_gpios {
        vol_up_n: vol-up-n-state {
                pins = "gpio5";
@@ -340,6 +379,19 @@ key_camera_n: key-camera-n {
                bias-pull-up;
        };
 
+       mdss_dsi_n: mdss-dsi-n {
+               pins = "gpio82";
+               function = "gpio";
+               drive-strength = <8>;
+               bias-disable;
+       };
+
+       panel_en_n: panel-en-n {
+               pins = "gpio65";
+               function = "gpio";
+               bias-disable;
+       };
+
        ts_int_n: ts-int-n {
                pins = "gpio80";
                function = "gpio";

-- 
2.45.2