From: Mike Frysinger <[EMAIL PROTECTED]>
initial char driver for otp memory
(only read supported atm ... needs real examples/docs for write support)
Signed-off-by: Mike Frysinger <[EMAIL PROTECTED]>
Signed-off-by: Bryan Wu <[EMAIL PROTECTED]>
---
drivers/char/Kconfig | 28 +++++++
drivers/char/Makefile | 1 +
drivers/char/bfin-otp.c | 203 +++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 232 insertions(+), 0 deletions(-)
create mode 100644 drivers/char/bfin-otp.c
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 4666295..2a426db 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -492,6 +492,34 @@ config BRIQ_PANEL
It's safe to say N here.
+config BFIN_OTP
+ tristate "Blackfin On-Chip OTP Memory Support"
+ depends on BLACKFIN && (BF52x || BF54x)
+ default y
+ help
+ If you say Y here, you will get support for a character device
+ interface into the One Time Programmable memory pages that are
+ stored on the Blackfin processor. This will not get you access
+ to the secure memory pages however. You will need to write your
+ own secure code and reader for that.
+
+ To compile this driver as a module, choose M here: the module
+ will be called bfin-otp.
+
+ If unsure, it is safe to say Y.
+
+config BFIN_OTP_WRITE_ENABLE
+ bool "Enable writing support of OTP pages"
+ depends on BFIN_OTP
+ default n
+ help
+ If you say Y here, you will enable support for writing of the
+ OTP pages. This is dangerous by nature as you can only program
+ the pages once, so only enable this option when you actually
+ need it so as to not inadvertently clobber data.
+
+ If unsure, say N.
+
config PRINTER
tristate "Parallel printer support"
depends on PARPORT
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 96fc01e..b2f1c77 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -60,6 +60,7 @@ obj-$(CONFIG_VIOTAPE) += viotape.o
obj-$(CONFIG_HVCS) += hvcs.o
obj-$(CONFIG_SGI_MBCS) += mbcs.o
obj-$(CONFIG_BRIQ_PANEL) += briq_panel.o
+obj-$(CONFIG_BFIN_OTP) += bfin-otp.o
obj-$(CONFIG_PRINTER) += lp.o
obj-$(CONFIG_TIPAR) += tipar.o
diff --git a/drivers/char/bfin-otp.c b/drivers/char/bfin-otp.c
new file mode 100644
index 0000000..896a987
--- /dev/null
+++ b/drivers/char/bfin-otp.c
@@ -0,0 +1,203 @@
+/*
+ * Blackfin On-Chip OTP Memory Interface
+ * Supports BF52x/BF54x
+ *
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/cdev.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/types.h>
+
+#include <asm/blackfin.h>
+#include <asm/uaccess.h>
+
+#define stamp(fmt, args...) pr_debug("%s:%i: " fmt "\n", __func__, __LINE__,
## args)
+#define stampit() stamp("here i am")
+
+#define DRIVER_NAME "bfin-otp"
+#define PFX DRIVER_NAME ": "
+
+DEFINE_MUTEX(bfin_otp_lock);
+
+/* OTP Boot ROM functions */
+#define _BOOTROM_OTP_COMMAND 0xEF000018
+#define _BOOTROM_OTP_READ 0xEF00001A
+#define _BOOTROM_OTP_WRITE 0xEF00001C
+
+static u32 (* const otp_command)(u32 command, u32 value) = (void
*)_BOOTROM_OTP_COMMAND;
+static u32 (* const otp_read)(u32 page, u32 flags, u64 *page_content) = (void
*)_BOOTROM_OTP_READ;
+static u32 (* const otp_write)(u32 page, u32 flags, u64 *page_content) = (void
*)_BOOTROM_OTP_WRITE;
+
+/* otp_command(): defines for "command" */
+#define OTP_INIT 0x00000001
+#define OTP_CLOSE 0x00000002
+
+/* otp_{read,write}(): defines for "flags" */
+#define OTP_LOWER_HALF 0x00000000 /* select upper/lower 64-bit half (bit
0) */
+#define OTP_UPPER_HALF 0x00000001
+#define OTP_NO_ECC 0x00000010 /* do not use ECC */
+#define OTP_LOCK 0x00000020 /* sets page protection bit for page */
+#define OTP_ACCESS_READ 0x00001000
+#define OTP_ACCESS_READWRITE 0x00002000
+
+/* Return values for all functions */
+#define OTP_SUCCESS 0x00000000
+#define OTP_MASTER_ERROR 0x001
+#define OTP_WRITE_ERROR 0x003
+#define OTP_READ_ERROR 0x005
+#define OTP_ACC_VIO_ERROR 0x009
+#define OTP_DATA_MULT_ERROR 0x011
+#define OTP_ECC_MULT_ERROR 0x021
+#define OTP_PREV_WR_ERROR 0x041
+#define OTP_DATA_SB_WARN 0x100
+#define OTP_ECC_SB_WARN 0x200
+
+/**
+ * bfin_otp_read - Read OTP pages
+ *
+ * All reads must be in half page chunks (half page == 64 bits).
+ */
+ssize_t bfin_otp_read(struct file *file, char __user *buff, size_t count,
loff_t *pos)
+{
+ ssize_t bytes_done;
+ u32 page, flags, ret;
+ u64 content;
+
+ stampit();
+
+ if (count % sizeof(u64))
+ return -EMSGSIZE;
+
+ if (mutex_lock_interruptible(&bfin_otp_lock))
+ return -ERESTARTSYS;
+
+ bytes_done = 0;
+ page = *pos / (sizeof(u64) * 2);
+ while (bytes_done < count) {
+ flags = (*pos % (sizeof(u64) * 2) ? OTP_UPPER_HALF :
OTP_LOWER_HALF);
+ stamp("processing page %i (%s)", page, (flags == OTP_UPPER_HALF
? "upper" : "lower"));
+ ret = otp_read(page, flags, &content);
+ if (ret & OTP_MASTER_ERROR) {
+ bytes_done = -EIO;
+ break;
+ }
+ if (copy_to_user(buff + bytes_done, &content, sizeof(content)))
{
+ bytes_done = -EFAULT;
+ break;
+ }
+ if (flags == OTP_UPPER_HALF)
+ ++page;
+ bytes_done += sizeof(content);
+ *pos += sizeof(content);
+ }
+
+ mutex_unlock(&bfin_otp_lock);
+
+ return bytes_done;
+}
+
+#ifdef CONFIG_BFIN_OTP_WRITE_ENABLE
+/**
+ * bfin_otp_write - Write OTP pages
+ *
+ * All writes must be in half page chunks (half page == 64 bits).
+ */
+static ssize_t bfin_otp_write(struct file *filp, const char __user *buff,
size_t count, loff_t *pos)
+{
+ stampit();
+
+ if (count % sizeof(u64))
+ return -EMSGSIZE;
+
+ if (mutex_lock_interruptible(&bfin_otp_lock))
+ return -ERESTARTSYS;
+
+ /* need otp_init() documentation before this can be implemented */
+
+ mutex_unlock(&bfin_otp_lock);
+
+ return -EINVAL;
+}
+#else
+# define bfin_otp_write NULL
+#endif
+
+static struct class *bfin_otp_class;
+static dev_t bfin_otp_dev_node;
+static struct cdev bfin_otp_cdev;
+
+static struct file_operations bfin_otp_fops = {
+ .owner = THIS_MODULE,
+ .read = bfin_otp_read,
+ .write = bfin_otp_write,
+};
+
+/**
+ * bfin_otp_init - Initialize module
+ *
+ * Registers the device and notifier handler. Actual device
+ * initialization is handled by bfin_otp_open().
+ */
+static int __init bfin_otp_init(void)
+{
+ int ret;
+
+ stampit();
+
+ ret = alloc_chrdev_region(&bfin_otp_dev_node, 0, 1, "otp");
+ if (ret) {
+ printk(KERN_ERR PFX "unable to get a char device\n");
+ return ret;
+ }
+
+ cdev_init(&bfin_otp_cdev, &bfin_otp_fops);
+ bfin_otp_cdev.owner = THIS_MODULE;
+ bfin_otp_cdev.ops = &bfin_otp_fops;
+
+ ret = cdev_add(&bfin_otp_cdev, bfin_otp_dev_node, 1);
+ if (ret) {
+ unregister_chrdev_region(bfin_otp_dev_node, 1);
+ printk(KERN_ERR PFX "unable to register char device\n");
+ return ret;
+ }
+
+ bfin_otp_class = class_create(THIS_MODULE, "otp");
+ device_create(bfin_otp_class, NULL, bfin_otp_dev_node, "otp");
+
+ printk(KERN_INFO PFX "initialized\n");
+
+ return 0;
+}
+
+/**
+ * bfin_otp_exit - Deinitialize module
+ *
+ * Unregisters the device and notifier handler. Actual device
+ * deinitialization is handled by bfin_otp_close().
+ */
+static void __exit bfin_otp_exit(void)
+{
+ stampit();
+
+ device_destroy(bfin_otp_class, bfin_otp_dev_node);
+ class_destroy(bfin_otp_class);
+ unregister_chrdev_region(bfin_otp_dev_node, 1);
+ cdev_del(&bfin_otp_cdev);
+}
+
+module_init(bfin_otp_init);
+module_exit(bfin_otp_exit);
+
+MODULE_AUTHOR("Mike Frysinger <[EMAIL PROTECTED]>");
+MODULE_DESCRIPTION("Blackfin OTP Memory Interface");
+MODULE_LICENSE("GPL");
--
1.5.3.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
