Hi Stanislav, On 2/21/25 5:14 PM, Stanislav Fomichev wrote:
On 02/21, Bastien Curutchet (eBPF Foundation) wrote:test_xdp_vlan.sh isn't used by the BPF CI.Migrate test_xdp_vlan.sh in prog_tests/xdp_vlan.c. It uses the same BPF programs located in progs/test_xdp_vlan.c and the same network topology. Remove test_xdp_vlan*.sh and their Makefile entries. Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutc...@bootlin.com> --- tools/testing/selftests/bpf/Makefile | 4 +- tools/testing/selftests/bpf/prog_tests/xdp_vlan.c | 175 ++++++++++++++++ tools/testing/selftests/bpf/test_xdp_vlan.sh | 233 --------------------- .../selftests/bpf/test_xdp_vlan_mode_generic.sh | 9 - .../selftests/bpf/test_xdp_vlan_mode_native.sh | 9 - 5 files changed, 176 insertions(+), 254 deletions(-) diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index 5dc9c84ed30f6e5a46572a9e428f692a79623469..09c1f731b8280696c729e3c87020ef749fee9dcb 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -103,8 +103,6 @@ TEST_PROGS := test_kmod.sh \ test_tunnel.sh \ test_lwt_seg6local.sh \ test_lirc_mode2.sh \ - test_xdp_vlan_mode_generic.sh \ - test_xdp_vlan_mode_native.sh \ test_lwt_ip_encap.sh \ test_tc_tunnel.sh \ test_tc_edt.sh \ @@ -118,7 +116,7 @@ TEST_PROGS := test_kmod.sh \TEST_PROGS_EXTENDED := \ima_setup.sh verify_sig_setup.sh \ - test_xdp_vlan.sh test_bpftool.py + test_bpftool.pyTEST_KMODS := bpf_testmod.ko bpf_test_no_cfi.ko bpf_test_modorder_x.ko \bpf_test_modorder_y.ko diff --git a/tools/testing/selftests/bpf/prog_tests/xdp_vlan.c b/tools/testing/selftests/bpf/prog_tests/xdp_vlan.c new file mode 100644 index 0000000000000000000000000000000000000000..18dd25344de768aa83a162a0c091f28a4e5f505e --- /dev/null +++ b/tools/testing/selftests/bpf/prog_tests/xdp_vlan.c @@ -0,0 +1,175 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* + * Network topology: + * ----------- ----------- + * | NS1 | | NS2 | + * | veth0 -|--------|- veth0 | + * ----------- ----------- + * + */ + +#define _GNU_SOURCE +#include <net/if.h> +#include <uapi/linux/if_link.h> + +#include "network_helpers.h" +#include "test_progs.h" +#include "test_xdp_vlan.skel.h" + + +#define VETH_NAME "veth0" +#define NS_MAX_SIZE 32 +#define NS1_NAME "ns-xdp-vlan-1-" +#define NS2_NAME "ns-xdp-vlan-2-" +#define NS1_IP_ADDR "100.64.10.1" +#define NS2_IP_ADDR "100.64.10.2" +#define VLAN_ID 4011 + +static int setup_network(char *ns1, char *ns2) +{ + if (!ASSERT_OK(append_tid(ns1, NS_MAX_SIZE), "create ns1 name")) + goto fail; + if (!ASSERT_OK(append_tid(ns2, NS_MAX_SIZE), "create ns2 name")) + goto fail; +[..]+ SYS(fail, "ip netns add %s", ns1); + SYS(fail, "ip netns add %s", ns2);Will replacing these with open_netns work? Or we don't setup up enough state to cooperate with 'ip' tool? (same for cleanup_network if it works)
Yes, it will work. Initially I planned to use it but it isn't very convenient in this case because struct netns_obj is defined in test_progs.c, not in the header. This means you can't access ns->nsname to get the namespace name and as I use append_tid() this name is dynamic. So using netns_new / close_netns / netns_free would require keeping both the namespace names (for further ip commands / open_netns) and the netns_objs objects (for netns_free) whereas here I only keep the namespace name.
I can send a V2 using netns_* helpers if you prefer, though. Maybe I can also either move the netns_obj definition in test_progs.h or create a 'get_nsname()' helper ?
+ SYS(fail, "ip -n %s link add %s type veth peer name %s netns %s", + ns1, VETH_NAME, VETH_NAME, ns2); + + /* NOTICE: XDP require VLAN header inside packet payload + * - Thus, disable VLAN offloading driver features + */ + SYS(fail, "ip netns exec %s ethtool -K %s rxvlan off txvlan off", ns1, VETH_NAME); + SYS(fail, "ip netns exec %s ethtool -K %s rxvlan off txvlan off", ns2, VETH_NAME); + + /* NS1 configuration */ + SYS(fail, "ip -n %s addr add %s/24 dev %s", ns1, NS1_IP_ADDR, VETH_NAME); + SYS(fail, "ip -n %s link set %s up", ns1, VETH_NAME); + + /* NS2 configuration */ + SYS(fail, "ip -n %s link add link %s name %s.%d type vlan id %d", + ns2, VETH_NAME, VETH_NAME, VLAN_ID, VLAN_ID); + SYS(fail, "ip -n %s addr add %s/24 dev %s.%d", ns2, NS2_IP_ADDR, VETH_NAME, VLAN_ID); + SYS(fail, "ip -n %s link set %s up", ns2, VETH_NAME); + SYS(fail, "ip -n %s link set %s.%d up", ns2, VETH_NAME, VLAN_ID); + + /* At this point ping should fail because VLAN tags are only used by NS2 */ + return !SYS_NOFAIL("ip netns exec %s ping -W 1 -c1 %s", ns2, NS1_IP_ADDR); + +fail: + return -1; +} + +static void cleanup_network(const char *ns1, const char *ns2) +{ + SYS_NOFAIL("ip netns del %s", ns1); + SYS_NOFAIL("ip netns del %s", ns2); +} + +static void xdp_vlan(struct bpf_program *xdp, struct bpf_program *tc, u32 flags) +{ + LIBBPF_OPTS(bpf_tc_hook, tc_hook, .attach_point = BPF_TC_EGRESS); + LIBBPF_OPTS(bpf_tc_opts, tc_opts, .handle = 1, .priority = 1); + char ns1[NS_MAX_SIZE] = NS1_NAME; + char ns2[NS_MAX_SIZE] = NS2_NAME; + struct nstoken *nstoken = NULL; + int interface; + int ret; + + if (!ASSERT_OK(setup_network(ns1, ns2), "setup network")) + goto cleanup; + + nstoken = open_netns(ns1); + if (!ASSERT_OK_PTR(nstoken, "open NS1")) + goto cleanup; + + interface = if_nametoindex(VETH_NAME); + if (!ASSERT_NEQ(interface, 0, "get interface index")) + goto cleanup; + + ret = bpf_xdp_attach(interface, bpf_program__fd(xdp), flags, NULL); + if (!ASSERT_OK(ret, "attach xdp_vlan_change")) + goto cleanup; + + tc_hook.ifindex = interface; + ret = bpf_tc_hook_create(&tc_hook); + if (!ASSERT_OK(ret, "bpf_tc_hook_create")) + goto detach_xdp; + + /* Now we'll use BPF programs to pop/push the VLAN tags */ + tc_opts.prog_fd = bpf_program__fd(tc); + ret = bpf_tc_attach(&tc_hook, &tc_opts); + if (!ASSERT_OK(ret, "bpf_tc_attach")) + goto detach_xdp; + + close_netns(nstoken); + nstoken = NULL; + + /* Now the namespaces can reach each-other, test with pings */ + SYS(detach_tc, "ip netns exec %s ping -i 0.2 -W 2 -c 2 %s > /dev/null", ns1, NS2_IP_ADDR); + SYS(detach_tc, "ip netns exec %s ping -i 0.2 -W 2 -c 2 %s > /dev/null", ns2, NS1_IP_ADDR); + + +detach_tc: + bpf_tc_detach(&tc_hook, &tc_opts); +detach_xdp: + bpf_xdp_detach(interface, flags, NULL); +cleanup: + close_netns(nstoken); + cleanup_network(ns1, ns2); +} + +/* First test: Remove VLAN by setting VLAN ID 0, using "xdp_vlan_change" + * egress use TC to add back VLAN tag 4011 + */ +void test_xdp_vlan_change(void) +{ + struct test_xdp_vlan *skel; + + skel = test_xdp_vlan__open_and_load(); + if (!ASSERT_OK_PTR(skel, "xdp_vlan__open_and_load")) + return; +[..]+ if (test__start_subtest("0")) + xdp_vlan(skel->progs.xdp_vlan_change, skel->progs.tc_vlan_push, 0);Does the original test also test with flags=0? What is the purpose?
The original test allows testing the 'xdp', 'xdpgeneric' and 'xdpdrv' modes. My understanding is that flags=0 is the 'xdp' equivalent. IIRC, there are fallbacks that will set these flags to SKB or DRV mode at some point but, since it's allowed by the bpf_xdp_attach API, I thought it was worth testing. This way, if the fallbacks stop working at some point, we'll be noticed.
Best regards, Bastien
