The rproc_detach() function invokes __rproc_detach() before
rproc_unprepare_device(). The __rproc_detach() function sets the
rproc->state to "RPROC_DETACHED".
However, the TI K3 M4 driver erroneously looks for "RPROC_ATTACHED"
state in its .unprepare ops to identify IPC-only mode; which leads to
resetting the rproc in detach routine.
Therefore, correct the IPC-only mode detection logic to look for
"RPROC_DETACHED" in k3_m4_rproc_unprepare() function.
Fixes: ebcf9008a895 ("remoteproc: k3-m4: Add a remoteproc driver for M4F
subsystem")
Signed-off-by: Beleswar Padhi <b-pa...@ti.com>
---
v12: Changelog:
1. New patch. Fixup a state detection logic.
drivers/remoteproc/ti_k3_m4_remoteproc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/remoteproc/ti_k3_m4_remoteproc.c
b/drivers/remoteproc/ti_k3_m4_remoteproc.c
index a16fb165fcedd..6cd50b16a8e82 100644
--- a/drivers/remoteproc/ti_k3_m4_remoteproc.c
+++ b/drivers/remoteproc/ti_k3_m4_remoteproc.c
@@ -228,7 +228,7 @@ static int k3_m4_rproc_unprepare(struct rproc *rproc)
int ret;
/* If the core is going to be detached do not assert the module reset */
- if (rproc->state == RPROC_ATTACHED)
+ if (rproc->state == RPROC_DETACHED)
return 0;
ret = kproc->ti_sci->ops.dev_ops.put_device(kproc->ti_sci,
--
2.34.1
