On 5/8/25 3:23 AM, Bobby Eshleman wrote:
> This commit introduces a new vmtest.sh runner for vsock.
>
> It uses virtme-ng/qemu to run tests in a VM. The tests validate G2H,
> H2G, and loopback. The testing tools from tools/testing/vsock/ are
> reused. Currently, only vsock_test is used.
>
> VMCI and hyperv support is automatically built, though not used.
>
> Only tested on x86.
>
> To run:
>
> $ tools/testing/selftests/vsock/vmtest.sh
>
> or
>
> $ make -C tools/testing/selftests TARGETS=vsock run_tests
>
> Output (vmtest.sh):
> TAP version 13
> 1..3
> not ok 1 vm_server_host_client # exit=1
> ok 1 vm_client_host_server
> ok 2 vm_loopback
> SUMMARY: PASS=2 SKIP=0 FAIL=1
> 1..3
>
> Future work can include vsock_diag_test.
>
> The tap output style copies mm's run_vmtests.sh.
>
> Because vsock requires a VM to test anything other than loopback, this
> patch adds vmtest.sh as a kselftest itself. This is different than other
> systems that have a "vmtest.sh", where it is used as a utility script to
> spin up a VM to run the selftests as a guest (but isn't hooked into
> kselftest).
>
> I've began testing this in one of the NIPA environments Jakub as
> graciously provided. I would expect at least one more revision to have
> that setup ironed out and fully tested.
>
> Signed-off-by: Bobby Eshleman <bobbyeshle...@gmail.com>
> ---
> Changes in v4:
> - do not use special tab delimiter for help string parsing (Stefano + Paolo)
> - fix paths for when installing kselftest and running out-of-tree (Paolo)
> - change vng to using running kernel instead of compiled kernel (Paolo)
> - use multi-line string for QEMU_OPTS (Stefano)
> - change timeout to 300s (Paolo)
> - skip if tools are not found and use kselftests status codes (Paolo)
> - remove build from vmtest.sh (Paolo)
> - change 2222 -> SSH_HOST_PORT (Stefano)
> - add tap-format output
> - add vmtest.log to gitignore
> - check for vsock_test binary and remind user to build it if missing
> - create a proper build in makefile
> - style fixes
> - add ssh, timeout, and pkill to dependency check, just in case
> - fix numerical comparison in conditionals
> - check qemu pidfile exists before proceeding (avoid wasting time waiting for
> ssh)
> - fix tracking of pass/fail bug
> - fix stderr redirection bug
> - Link to v3:
> https://lore.kernel.org/r/20250428-vsock-vmtest-v3-1-181af6163...@gmail.com
>
> Changes in v3:
> - use common conditional syntax for checking variables
> - use return value instead of global rc
> - fix typo TEST_HOST_LISTENER_PORT -> TEST_HOST_PORT_LISTENER
> - use SIGTERM instead of SIGKILL on cleanup
> - use peer-cid=1 for loopback
> - change sleep delay times into globals
> - fix test_vm_loopback logging
> - add test selection in arguments
> - make QEMU an argument
> - check that vng binary is on path
> - use QEMU variable
> - change <tab><backslash> to <space><backslash>
> - fix hardcoded file paths
> - add comment in commit msg about script that vmtest.sh was based off of
> - Add tools/testing/selftest/vsock/Makefile for kselftest
> - Link to v2:
> https://lore.kernel.org/r/20250417-vsock-vmtest-v2-1-3901a2733...@gmail.com
>
> Changes in v2:
> - add kernel oops and warnings checker
> - change testname variable to use FUNCNAME
> - fix spacing in test_vm_server_host_client
> - add -s skip build option to vmtest.sh
> - add test_vm_loopback
> - pass port to vm_wait_for_listener
> - fix indentation in vmtest.sh
> - add vmci and hyperv to config
> - changed whitespace from tabs to spaces in help string
> - Link to v1:
> https://lore.kernel.org/r/20250410-vsock-vmtest-v1-1-f35a81dab...@gmail.com
> ---
> MAINTAINERS | 1 +
> tools/testing/selftests/vsock/.gitignore | 2 +
> tools/testing/selftests/vsock/Makefile | 17 ++
> tools/testing/selftests/vsock/config | 114 +++++++++
> tools/testing/selftests/vsock/settings | 1 +
> tools/testing/selftests/vsock/vmtest.sh | 423
> +++++++++++++++++++++++++++++++
> 6 files changed, 558 insertions(+)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 657a67f9031e..3fbdd7bbfce7 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -25751,6 +25751,7 @@ F: include/uapi/linux/vm_sockets.h
> F: include/uapi/linux/vm_sockets_diag.h
> F: include/uapi/linux/vsockmon.h
> F: net/vmw_vsock/
> +F: tools/testing/selftests/vsock/
> F: tools/testing/vsock/
>
> VMALLOC
> diff --git a/tools/testing/selftests/vsock/.gitignore
> b/tools/testing/selftests/vsock/.gitignore
> new file mode 100644
> index 000000000000..9c5bf379480f
> --- /dev/null
> +++ b/tools/testing/selftests/vsock/.gitignore
> @@ -0,0 +1,2 @@
> +vmtest.log
> +vsock_test
> diff --git a/tools/testing/selftests/vsock/Makefile
> b/tools/testing/selftests/vsock/Makefile
> new file mode 100644
> index 000000000000..71fca0a2b8da
> --- /dev/null
> +++ b/tools/testing/selftests/vsock/Makefile
> @@ -0,0 +1,17 @@
> +# SPDX-License-Identifier: GPL-2.0
> +
> +CURDIR := $(abspath .)
> +TOOLSDIR := $(abspath ../../..)
> +
> +$(OUTPUT)/vsock_test: $(TOOLSDIR)/testing/vsock/vsock_test
> + install -m 755 $< $@
> +
> +$(TOOLSDIR)/testing/vsock/vsock_test:
> + $(MAKE) -C $(TOOLSDIR)/testing/vsock vsock_test
> +
> +TEST_PROGS += vmtest.sh
> +EXTRA_CLEAN += vmtest.log
> +TEST_GEN_FILES := vsock_test
> +
> +include ../lib.mk
> +
> diff --git a/tools/testing/selftests/vsock/config
> b/tools/testing/selftests/vsock/config
> new file mode 100644
> index 000000000000..3bffaaf98fff
> --- /dev/null
> +++ b/tools/testing/selftests/vsock/config
> @@ -0,0 +1,114 @@
> +CONFIG_BLK_DEV_INITRD=y
> +CONFIG_BPF=y
> +CONFIG_BPF_SYSCALL=y
> +CONFIG_BPF_JIT=y
> +CONFIG_HAVE_EBPF_JIT=y
> +CONFIG_BPF_EVENTS=y
> +CONFIG_FTRACE_SYSCALLS=y
> +CONFIG_FUNCTION_TRACER=y
> +CONFIG_HAVE_DYNAMIC_FTRACE=y
> +CONFIG_DYNAMIC_FTRACE=y
> +CONFIG_HAVE_KPROBES=y
> +CONFIG_KPROBES=y
> +CONFIG_KPROBE_EVENTS=y
> +CONFIG_ARCH_SUPPORTS_UPROBES=y
> +CONFIG_UPROBES=y
> +CONFIG_UPROBE_EVENTS=y
> +CONFIG_DEBUG_FS=y
> +CONFIG_FW_CFG_SYSFS=y
> +CONFIG_FW_CFG_SYSFS_CMDLINE=y
> +CONFIG_DRM=y
> +CONFIG_DRM_VIRTIO_GPU=y
> +CONFIG_DRM_VIRTIO_GPU_KMS=y
> +CONFIG_DRM_BOCHS=y
> +CONFIG_VIRTIO_IOMMU=y
> +CONFIG_SOUND=y
> +CONFIG_SND=y
> +CONFIG_SND_SEQUENCER=y
> +CONFIG_SND_PCI=y
> +CONFIG_SND_INTEL8X0=y
> +CONFIG_SND_HDA_CODEC_REALTEK=y
> +CONFIG_SECURITYFS=y
> +CONFIG_CGROUP_BPF=y
> +CONFIG_SQUASHFS=y
> +CONFIG_SQUASHFS_XZ=y
> +CONFIG_SQUASHFS_ZSTD=y
> +CONFIG_FUSE_FS=y
> +CONFIG_SERIO=y
> +CONFIG_PCI=y
> +CONFIG_INPUT=y
> +CONFIG_INPUT_KEYBOARD=y
> +CONFIG_KEYBOARD_ATKBD=y
> +CONFIG_SERIAL_8250=y
> +CONFIG_SERIAL_8250_CONSOLE=y
> +CONFIG_X86_VERBOSE_BOOTUP=y
> +CONFIG_VGA_CONSOLE=y
> +CONFIG_FB=y
> +CONFIG_FB_VESA=y
> +CONFIG_FRAMEBUFFER_CONSOLE=y
> +CONFIG_RTC_CLASS=y
> +CONFIG_RTC_HCTOSYS=y
> +CONFIG_RTC_DRV_CMOS=y
> +CONFIG_HYPERVISOR_GUEST=y
> +CONFIG_PARAVIRT=y
> +CONFIG_KVM_GUEST=y
> +CONFIG_KVM=y
> +CONFIG_KVM_INTEL=y
> +CONFIG_KVM_AMD=y
> +CONFIG_VSOCKETS=y
> +CONFIG_VSOCKETS_DIAG=y
> +CONFIG_VSOCKETS_LOOPBACK=y
> +CONFIG_VMWARE_VMCI_VSOCKETS=y
> +CONFIG_VIRTIO_VSOCKETS=y
> +CONFIG_VIRTIO_VSOCKETS_COMMON=y
> +CONFIG_HYPERV_VSOCKETS=y
> +CONFIG_VMWARE_VMCI=y
> +CONFIG_VHOST_VSOCK=y
> +CONFIG_HYPERV=y
> +CONFIG_UEVENT_HELPER=n
> +CONFIG_VIRTIO=y
> +CONFIG_VIRTIO_PCI=y
> +CONFIG_VIRTIO_MMIO=y
> +CONFIG_VIRTIO_BALLOON=y
> +CONFIG_NET=y
> +CONFIG_NET_CORE=y
> +CONFIG_NETDEVICES=y
> +CONFIG_NETWORK_FILESYSTEMS=y
> +CONFIG_INET=y
> +CONFIG_NET_9P=y
> +CONFIG_NET_9P_VIRTIO=y
> +CONFIG_9P_FS=y
> +CONFIG_VIRTIO_NET=y
> +CONFIG_CMDLINE_OVERRIDE=n
> +CONFIG_BINFMT_SCRIPT=y
> +CONFIG_SHMEM=y
> +CONFIG_TMPFS=y
> +CONFIG_UNIX=y
> +CONFIG_MODULE_SIG_FORCE=n
> +CONFIG_DEVTMPFS=y
> +CONFIG_TTY=y
> +CONFIG_VT=y
> +CONFIG_UNIX98_PTYS=y
> +CONFIG_EARLY_PRINTK=y
> +CONFIG_INOTIFY_USER=y
> +CONFIG_BLOCK=y
> +CONFIG_SCSI_LOWLEVEL=y
> +CONFIG_SCSI=y
> +CONFIG_SCSI_VIRTIO=y
> +CONFIG_BLK_DEV_SD=y
> +CONFIG_VIRTIO_CONSOLE=y
> +CONFIG_WATCHDOG=y
> +CONFIG_WATCHDOG_CORE=y
> +CONFIG_I6300ESB_WDT=y
> +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
> +CONFIG_OVERLAY_FS=y
> +CONFIG_DAX=y
> +CONFIG_DAX_DRIVER=y
> +CONFIG_FS_DAX=y
> +CONFIG_MEMORY_HOTPLUG=y
> +CONFIG_MEMORY_HOTREMOVE=y
> +CONFIG_ZONE_DEVICE=y
> +CONFIG_FUSE_FS=y
> +CONFIG_VIRTIO_FS=y
> +CONFIG_VSOCKETS=y
> +CONFIG_VIRTIO_VSOCKETS=y
> diff --git a/tools/testing/selftests/vsock/settings
> b/tools/testing/selftests/vsock/settings
> new file mode 100644
> index 000000000000..694d70710ff0
> --- /dev/null
> +++ b/tools/testing/selftests/vsock/settings
> @@ -0,0 +1 @@
> +timeout=300
> diff --git a/tools/testing/selftests/vsock/vmtest.sh
> b/tools/testing/selftests/vsock/vmtest.sh
> new file mode 100755
> index 000000000000..d7e727306175
> --- /dev/null
> +++ b/tools/testing/selftests/vsock/vmtest.sh
> @@ -0,0 +1,423 @@
> +#!/bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +#
> +# Copyright (c) 2025 Meta Platforms, Inc. and affiliates
> +#
> +# Dependencies:
> +# * virtme-ng
> +# * busybox-static (used by virtme-ng)
> +# * qemu (used by virtme-ng)
> +
> +TAP_PREFIX="# "
> +VERBOSE=0
> +KSFT_PASS=0
> +KSFT_FAIL=1
> +KSFT_SKIP=4
Possibly you could source kselftest/ktap_helpers.sh for the above
'constant'. Otherwise it would be better to make them readonly.
> +SCRIPT_DIR="$(cd -P -- "$(dirname -- "${BASH_SOURCE[0]}")" && pwd -P)"
> +VSOCK_TEST=${SCRIPT_DIR}/vsock_test
> +
> +TEST_GUEST_PORT=51000
> +TEST_HOST_PORT=50000
> +TEST_HOST_PORT_LISTENER=50001
> +SSH_GUEST_PORT=22
> +SSH_HOST_PORT=2222
> +VSOCK_CID=1234
> +WAIT_PERIOD=3
> +WAIT_PERIOD_MAX=20
> +WAIT_TOTAL=$(( WAIT_PERIOD * WAIT_PERIOD_MAX ))
> +
> +QEMU_PIDFILE=/tmp/qemu.pid
You likely want to use mktemp for the above file name.
> +# virtme-ng offers a netdev for ssh when using "--ssh", but we also need a
> +# control port forwarded for vsock_test. Because virtme-ng doesn't support
> +# adding an additional port to forward to the device created from "--ssh" and
> +# virtme-init mistakenly sets identical IPs to the ssh device and additional
> +# devices, we instead opt out of using --ssh, add the device manually, and
> also
> +# add the kernel cmdline options that virtme-init uses to setup the
> interface.
> +QEMU_TEST_PORT_FWD="hostfwd=tcp::${TEST_HOST_PORT}-:${TEST_GUEST_PORT}"
> +QEMU_SSH_PORT_FWD="hostfwd=tcp::${SSH_HOST_PORT}-:${SSH_GUEST_PORT}"
> +QEMU_OPTS="\
> + -netdev user,id=n0,${QEMU_TEST_PORT_FWD},${QEMU_SSH_PORT_FWD} \
> + -device virtio-net-pci,netdev=n0 \
> + -device vhost-vsock-pci,guest-cid=${VSOCK_CID} \
> + --pidfile ${QEMU_PIDFILE} \
> +"
> +KERNEL_CMDLINE="virtme.dhcp net.ifnames=0 biosdevname=0 virtme.ssh
> virtme_ssh_user=$USER"
> +
> +LOG=${SCRIPT_DIR}/vmtest.log
Same here.
> +TEST_NAMES=(vm_server_host_client vm_client_host_server vm_loopback)
> +TEST_DESCS=(
> + "Run vsock_test in server mode on the VM and in client mode on the
> host."
> + "Run vsock_test in client mode on the VM and in server mode on the
> host."
> + "Run vsock_test using the loopback transport in the VM."
> +)
> +
> +usage() {
> + local name
> + local desc
> + local i
Minor nit, plewase leave an empty line between variables declaration and
the actual code.
[...]
> +check_deps() {
> + for dep in vng ${QEMU} busybox timeout pkill ssh; do
You don't need to check for 'timeout', as that is part of the coreutils
and supposed to be available on all the running hosts.
> + if [[ ! -x "$(command -v ${dep})" ]]; then
> + echo -e "skip: dependency ${dep} not found!\n"
> + exit ${KSFT_SKIP}
> + fi
> + done
> +
> + if [[ ! -x $(command -v ${VSOCK_TEST}) ]]; then
> + printf "skip: ${VSOCK_TEST} not found!"
> + printf " Please build the kselftest vsock target.\n"
> + exit ${KSFT_SKIP}
> + fi
> +}
> +
> +vm_setup() {
Possibly 'vm_start()' ?
> + local VNG_OPTS=""
> + local logfile=/dev/null
> +
> + if [[ "${VERBOSE}" = 1 ]]; then
> + VNG_OPTS="--verbose"
> + logfile=/dev/stdout
> + fi
> + vng \
> + $VNG_OPTS \
> + --run \
> + --qemu-opts="${QEMU_OPTS}" \
> + --qemu="${QEMU}" \
> + --user root \
> + --append "${KERNEL_CMDLINE}" \
> + --rw &> ${logfile} &
> +
> + timeout ${WAIT_TOTAL} \
> + bash -c 'while [[ ! -e '"${QEMU_PIDFILE}"' ]]; do sleep 1;
> done; exit 0'
> + if [[ ! $? -eq 0 ]]; then
> + die "failed to boot VM"
> + fi
> +}
> +
> +vm_wait_for_ssh() {
> + i=0
> + while [[ true ]]; do
> + if [[ ${i} -gt ${WAIT_PERIOD_MAX} ]]; then
WAIT_PERIOD_MAX == 20 is possibly a little low for some systems (i.e.
the 'host' itself could be a VM)
> + die "Timed out waiting for guest ssh"
> + fi
> + vm_ssh -- true
> + if [[ $? -eq 0 ]]; then
> + break
> + fi
> + i=$(( i + 1 ))
> + sleep ${WAIT_PERIOD}
> + done
> +}
> +
> +wait_for_listener() {
> + local port=$1
> + local interval=$2
> + local max_intervals=$3
> + local i=0
> + while ! ss -ltn | grep -q ":${port}"; do
> + if [[ ${i} -gt ${max_intervals} ]]; then
> + die "Timed out waiting for listener on port ${port}"
> + fi
> + i=$(( i + 1 ))
> + sleep ${interval}
> + done
> +}
FTR there is a very similar helper in selftests/net/net_helper.sh
> +
> +vm_wait_for_listener() {
> + local port=$1
> + vm_ssh <<EOF
> +$(declare -f wait_for_listener)
> +wait_for_listener ${port} ${WAIT_PERIOD} ${WAIT_PERIOD_MAX}
> +EOF
> +}
> +
> +host_wait_for_listener() {
> + wait_for_listener ${TEST_HOST_PORT_LISTENER} ${WAIT_PERIOD}
> ${WAIT_PERIOD_MAX}
> +}
> +
> +__log_stdin() {
> + cat | awk '{ printf "%s:\t%s\n","'"${prefix}"'", $0 }'
> +}
> +
> +__log_args() {
> + echo "$*" | awk '{ printf "%s:\t%s\n","'"${prefix}"'", $0 }'
> +}
> +
> +log() {
> + local prefix="$1"
> + shift
> +
> + local redirect=
> + if [[ ${VERBOSE} -eq 0 ]]; then
> + redirect=/dev/null
> + else
> + redirect=/dev/stdout
> + fi
> +
> + if [[ "$#" -eq 0 ]]; then
> + __log_stdin | tee -a ${LOG} > ${redirect}
> + else
> + __log_args | tee -a ${LOG} > ${redirect}
> + fi
> +}
> +
> +log_setup() {
> + log "setup" "$@"
> +}
> +
> +log_host() {
> + testname=$1
> + shift
> + log "test:${testname}:host" "$@"
> +}
> +
> +log_guest() {
> + testname=$1
> + shift
> + log "test:${testname}:guest" "$@"
> +}
> +
> +tap_prefix() {
> + sed -e "s/^/${TAP_PREFIX}/"
> +}
> +
> +tap_output() {
> + if [[ ! -z "$TAP_PREFIX" ]]; then
> + read str
> + echo $str
> + fi
> +}
> +
> +test_vm_server_host_client() {
> + local testname="${FUNCNAME[0]#test_}"
> +
> + vm_ssh -- "${VSOCK_TEST}" \
> + --mode=server \
> + --control-port="${TEST_GUEST_PORT}" \
> + --peer-cid=2 \
> + 2>&1 | log_guest "${testname}" &
> +
> + vm_wait_for_listener ${TEST_GUEST_PORT}
> +
> + ${VSOCK_TEST} \
> + --mode=client \
> + --control-host=127.0.0.1 \
> + --peer-cid="${VSOCK_CID}" \
> + --control-port="${TEST_HOST_PORT}" 2>&1 | log_host "${testname}"
> +
> + return $?
> +}
> +
> +test_vm_client_host_server() {
> + local testname="${FUNCNAME[0]#test_}"
> +
> + ${VSOCK_TEST} \
> + --mode "server" \
> + --control-port "${TEST_HOST_PORT_LISTENER}" \
> + --peer-cid "${VSOCK_CID}" 2>&1 | log_host "${testname}" &
> +
> + host_wait_for_listener
> +
> + vm_ssh -- "${VSOCK_TEST}" \
> + --mode=client \
> + --control-host=10.0.2.2 \
> + --peer-cid=2 \
> + --control-port="${TEST_HOST_PORT_LISTENER}" 2>&1 | log_guest
> "${testname}"
> +
> + return $?
> +}
> +
> +test_vm_loopback() {
> + local testname="${FUNCNAME[0]#test_}"
> + local port=60000 # non-forwarded local port
> +
> + vm_ssh -- ${VSOCK_TEST} \
> + --mode=server \
> + --control-port="${port}" \
> + --peer-cid=1 2>&1 | log_guest "${testname}" &
> +
> + vm_wait_for_listener ${port}
> +
> + vm_ssh -- ${VSOCK_TEST} \
> + --mode=client \
> + --control-host="127.0.0.1" \
> + --control-port="${port}" \
> + --peer-cid=1 2>&1 | log_guest "${testname}"
> +
> + return $?
> +}
> +
> +run_test() {
> + unset IFS
This is usually preceed by
OLD_IFS=$IFS
and restored at the end of the relevant scope, to avoid side effects
elsewhere.
> + local host_oops_cnt_before
> + local host_warn_cnt_before
> + local vm_oops_cnt_before
> + local vm_warn_cnt_before
> + local host_oops_cnt_after
> + local host_warn_cnt_after
> + local vm_oops_cnt_after
> + local vm_warn_cnt_after
> + local name
> + local rc
> +
> + host_oops_cnt_before=$(dmesg | grep -c -i 'Oops')
> + host_warn_cnt_before=$(dmesg --level=warn | wc -l)
> + vm_oops_cnt_before=$(vm_ssh -- dmesg | grep -c -i 'Oops')
> + vm_warn_cnt_before=$(vm_ssh -- dmesg --level=warn | wc -l)
> +
> + name=$(echo "${1}" | awk '{ print $1 }')
> + eval test_"${name}"
> + rc=$?
> +
> + host_oops_cnt_after=$(dmesg | grep -i 'Oops' | wc -l)
> + if [[ ${host_oops_cnt_after} -gt ${host_oops_cnt_before} ]]; then
> + echo "${name}: kernel oops detected on host" | log_host ${name}
> + rc=$KSFT_FAIL
> + fi
> +
> + host_warn_cnt_after=$(dmesg --level=warn | wc -l)
> + if [[ ${host_warn_cnt_after} -gt ${host_warn_cnt_before} ]]; then
> + echo "${name}: kernel warning detected on host" | log_host
> ${name}
> + rc=$KSFT_FAIL
> + fi
> +
> + vm_oops_cnt_after=$(vm_ssh -- dmesg | grep -i 'Oops' | wc -l)
> + if [[ ${vm_oops_cnt_after} -gt ${vm_oops_cnt_before} ]]; then
> + echo "${name}: kernel oops detected on vm" | log_host ${name}
> + rc=$KSFT_FAIL
> + fi
> +
> + vm_warn_cnt_after=$(vm_ssh -- dmesg --level=warn | wc -l)
> + if [[ ${vm_warn_cnt_after} -gt ${vm_warn_cnt_before} ]]; then
> + echo "${name}: kernel warning detected on vm" | log_host ${name}
> + rc=$KSFT_FAIL
> + fi
> +
> + return ${rc}
> +}
> +
> +while getopts :hvsq: o
> +do
> + case $o in
> + v) VERBOSE=1;;
> + q) QEMU=$OPTARG;;
> + h|*) usage;;
> + esac
> +done
> +shift $((OPTIND-1))
> +
> +trap cleanup EXIT
> +
> +if [[ ${#} -eq 0 ]]; then
> + ARGS=(${TEST_NAMES[@]})
> +else
> + ARGS=($@)
> +fi
> +
> +check_args "${ARGS[@]}"
> +check_deps
> +
> +QEMU=$(command -v ${QEMU:-qemu-system-$(uname -m)})
Should the QEMU variable be initialized before check_deps() - where it's
used?
To me tt looks like this is almost ready, thank you for the great effort!
/P
