The following changes since commit 0af2f6be1b4281385b618cb86ad946eded089ac8:
Linux 6.15-rc1 (2025-04-06 13:11:33 -0700) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux.git tags/rproc-v6.16 for you to fetch changes up to 5779f6f9a64ffc3e002a37ab1f78521d9a5c0100: remoteproc: k3: Refactor release_tsp() functions into common driver (2025-05-20 11:19:12 -0600) ---------------------------------------------------------------- remoteproc updates for v6.16 Fix resource cleanup in the remoteproc attach error handling code paths. Refactor the various TI K3 drivers to extract and reuse common code between them. Add support in the i.MX remoteproc driver for determining from the firmware if Linux should wait on a "firmware ready" signal at startup. Improve the Xilinx R5F power down mechanism to handle use cases where this is shared with other entities in the system. ---------------------------------------------------------------- Arnaud Pouliquen (2): dt-bindings: remoteproc: stm32-rproc: Add firmware-name property remoteproc: stm32_rproc: Allow to specify firmware default name Beleswar Padhi (34): remoteproc: k3-r5: Refactor sequential core power up/down operations remoteproc: k3-m4: Don't assert reset in detach routine remoteproc: k3-r5: Re-order internal memory initialization functions remoteproc: k3-r5: Re-order k3_r5_release_tsp() function remoteproc: k3-r5: Refactor Data Structures to Align with DSP and M4 remoteproc: k3-r5: Use k3_r5_rproc_mem_data structure for memory info remoteproc: k3-{m4/dsp}: Add a void ptr member in rproc internal struct remoteproc: k3-m4: Add pointer to rproc struct within k3_m4_rproc remoteproc: k3-m4: Use k3_rproc_mem_data structure for memory info remoteproc: k3: Refactor shared data structures remoteproc: k3: Refactor mailbox rx_callback functions into common driver remoteproc: k3: Refactor .kick rproc ops into common driver remoteproc: k3-dsp: Correct Reset logic for devices without lresets remoteproc: k3-m4: Introduce central function to put rproc into reset remoteproc: k3: Refactor rproc_reset() implementation into common driver remoteproc: k3-dsp: Correct Reset deassert logic for devices w/o lresets remoteproc: k3-m4: Introduce central function to release rproc from reset remoteproc: k3: Refactor rproc_release() implementation into common driver remoteproc: k3-m4: Ping the mbox while acquiring the channel remoteproc: k3: Refactor rproc_request_mbox() implementations into common driver remoteproc: k3-dsp: Don't override rproc ops in IPC-only mode remoteproc: k3-dsp: Assert local reset during .prepare callback remoteproc: k3: Refactor .prepare rproc ops into common driver remoteproc: k3: Refactor .unprepare rproc ops into common driver remoteproc: k3: Refactor .start rproc ops into common driver remoteproc: k3: Refactor .stop rproc ops into common driver remoteproc: k3: Refactor .attach rproc ops into common driver remoteproc: k3: Refactor .detach rproc ops into common driver remoteproc: k3: Refactor .get_loaded_rsc_table ops into common driver remoteproc: k3: Refactor .da_to_va rproc ops into common driver remoteproc: k3: Refactor of_get_memories() functions into common driver remoteproc: k3: Refactor mem_release() functions into common driver remoteproc: k3: Refactor reserved_mem_init() functions into common driver remoteproc: k3: Refactor release_tsp() functions into common driver Bjorn Andersson (1): Revert "remoteproc: core: Clear table_sz when rproc_shutdown" Dan Carpenter (1): remoteproc: qcom_wcnss_iris: Add missing put_device() on error in probe Iuliana Prodan (1): remoteproc: imx_dsp_rproc: Add support for DSP-specific features Konrad Dybcio (1): dt-bindings: remoteproc: qcom,sm8350-pas: Add SC8280XP Krzysztof Kozlowski (1): dt-bindings: remoteproc: qcom,sm8150-pas: Add missing SC8180X compatible Siddharth Vadapalli (2): remoteproc: k3-r5: Drop check performed in k3_r5_rproc_{mbox_callback/kick} remoteproc: k3-dsp: Drop check performed in k3_dsp_rproc_{mbox_callback/kick} Tanmay Shah (1): remoteproc: xlnx: Avoid RPU force power down Xiaolei Wang (2): remoteproc: core: Cleanup acquired resources when rproc_handle_resources() fails in rproc_attach() remoteproc: core: Release rproc->clean_table after rproc_attach() fails .../bindings/remoteproc/qcom,sm8150-pas.yaml | 3 + .../bindings/remoteproc/qcom,sm8350-pas.yaml | 54 +- .../bindings/remoteproc/st,stm32-rproc.yaml | 4 + drivers/remoteproc/Makefile | 6 +- drivers/remoteproc/imx_dsp_rproc.c | 98 +- drivers/remoteproc/qcom_wcnss_iris.c | 2 + drivers/remoteproc/remoteproc_core.c | 7 +- drivers/remoteproc/stm32_rproc.c | 8 +- drivers/remoteproc/ti_k3_common.c | 551 +++++++++++ drivers/remoteproc/ti_k3_common.h | 118 +++ drivers/remoteproc/ti_k3_dsp_remoteproc.c | 616 +----------- drivers/remoteproc/ti_k3_m4_remoteproc.c | 583 +---------- drivers/remoteproc/ti_k3_r5_remoteproc.c | 1018 +++++++------------- drivers/remoteproc/xlnx_r5_remoteproc.c | 34 +- 14 files changed, 1266 insertions(+), 1836 deletions(-) create mode 100644 drivers/remoteproc/ti_k3_common.c create mode 100644 drivers/remoteproc/ti_k3_common.h
