Document the Top Level Mode Multiplexer on the SM7635 Platform. Signed-off-by: Luca Weiss <luca.we...@fairphone.com> --- .../bindings/pinctrl/qcom,sm7635-tlmm.yaml | 133 +++++++++++++++++++++ 1 file changed, 133 insertions(+)
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm7635-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm7635-tlmm.yaml new file mode 100644 index 0000000000000000000000000000000000000000..3f49239efb6e866015b40e3477a8bd0edd21b1fc --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm7635-tlmm.yaml @@ -0,0 +1,133 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm7635-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. SM7635 TLMM block + +maintainers: + - Luca Weiss <luca.we...@fairphone.com> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm SM7635 SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,sm7635-tlmm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 84 + + gpio-line-names: + maxItems: 167 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm7635-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm7635-tlmm-state" + additionalProperties: false + +$defs: + qcom-sm7635-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-5][0-9]|16[0-7])$" + - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ gpio, aoss_cti, atest_char, atest_usb, audio_ext_mclk0, + audio_ext_mclk1, audio_ref_clk, cam_mclk, cci_async_in0, + cci_i2c_scl, cci_i2c_sda, cci_timer, coex_uart1_rx, + coex_uart1_tx, dbg_out_clk, ddr_bist_complete, ddr_bist_fail, + ddr_bist_start, ddr_bist_stop, ddr_pxi0, ddr_pxi1, dp0_hot, + egpio, gcc_gp1, gcc_gp2, gcc_gp3, host2wlan_sol, i2s0_data0, + i2s0_data1, i2s0_sck, i2s0_ws, ibi_i3c, jitter_bist, mdp_vsync, + mdp_vsync0_out, mdp_vsync1_out, mdp_vsync2_out, mdp_vsync3_out, + mdp_vsync_e, nav_gpio0, nav_gpio1, nav_gpio2, pcie0_clk_req_n, + pcie1_clk_req_n, phase_flag, pll_bist_sync, pll_clk_aux, + prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti, + qdss_gpio, qlink0_enable, qlink0_request, qlink0_wmss, + qlink1_enable, qlink1_request, qlink1_wmss, qspi0, qup0_se0, + qup0_se1, qup0_se2, qup0_se3, qup0_se4, qup0_se5, qup0_se6, + qup1_se0, qup1_se1, qup1_se2, qup1_se3, qup1_se4, qup1_se5, + qup1_se6, resout_gpio_n, sd_write_protect, sdc1_clk, sdc1_cmd, + sdc1_data, sdc1_rclk, sdc2_clk, sdc2_cmd, sdc2_data, + sdc2_fb_clk, tb_trig_sdc1, tb_trig_sdc2, tgu_ch0_trigout, + tgu_ch1_trigout, tmess_prng0, tmess_prng1, tmess_prng2, + tmess_prng3, tsense_pwm1, tsense_pwm2, uim0_clk, uim0_data, + uim0_present, uim0_reset, uim1_clk_mira, uim1_clk_mirb, + uim1_data_mira, uim1_data_mirb, uim1_present_mira, + uim1_present_mirb, uim1_reset_mira, uim1_reset_mirb, usb0_hs, + usb0_phy_ps, vfr_0, vfr_1, vsense_trigger_mirnat, wcn_sw, + wcn_sw_ctrl ] + + required: + - pins + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@f100000 { + compatible = "qcom,sm7635-tlmm"; + reg = <0x0f100000 0x300000>; + + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + gpio-ranges = <&tlmm 0 0 168>; + + gpio-wo-state { + pins = "gpio1"; + function = "gpio"; + }; + + qup-uart5-default-state { + pins = "gpio25", "gpio26"; + function = "qup0_se5"; + drive-strength = <2>; + bias-disable; + }; + }; +... -- 2.50.0
