On 6/25/25 11:13 AM, Luca Weiss wrote:
> Add driver for the Qualcomm interconnect buses found in SM7635 based
> platforms. The topology consists of several NoCs that are controlled by
> a remote processor that collects the aggregated bandwidth for each
> master-slave pairs.
>
> Signed-off-by: Luca Weiss <luca.we...@fairphone.com>
> ---
[...]
> +static const struct of_device_id qnoc_of_match[] = {
> + { .compatible = "qcom,sm7635-aggre1-noc",
> + .data = &sm7635_aggre1_noc},
> + { .compatible = "qcom,sm7635-aggre2-noc",
> + .data = &sm7635_aggre2_noc},
> + { .compatible = "qcom,sm7635-clk-virt",
> + .data = &sm7635_clk_virt},
> + { .compatible = "qcom,sm7635-cnoc-cfg",
> + .data = &sm7635_cnoc_cfg},
> + { .compatible = "qcom,sm7635-cnoc-main",
> + .data = &sm7635_cnoc_main},
> + { .compatible = "qcom,sm7635-gem-noc",
> + .data = &sm7635_gem_noc},
> + { .compatible = "qcom,sm7635-lpass-ag-noc",
> + .data = &sm7635_lpass_ag_noc},
> + { .compatible = "qcom,sm7635-mc-virt",
> + .data = &sm7635_mc_virt},
> + { .compatible = "qcom,sm7635-mmss-noc",
> + .data = &sm7635_mmss_noc},
> + { .compatible = "qcom,sm7635-nsp-noc",
> + .data = &sm7635_nsp_noc},
> + { .compatible = "qcom,sm7635-pcie-anoc",
> + .data = &sm7635_pcie_anoc},
> + { .compatible = "qcom,sm7635-system-noc",
> + .data = &sm7635_system_noc},
One line per entry, please
In addition to what Dmitry asked for, please also look into porting
QoS settings - those will require additional clock references in the ICC
nodes and as such, the bindings will be altered (which we'd prefer to get
right from the getgo).
As far as testing goes, there may not be any apparent perf changes, but
if you get the clocks list wrong, the device will lock up at boot (unless
you're booting with clk_ignore_unused and friends)
Konrad
