On Tue, Jul 08, 2025 at 10:13:24AM +0200, Krzysztof Kozlowski wrote: > On Wed, Jun 25, 2025 at 11:14:56AM +0200, Luca Weiss wrote: > > Document the FS Differential TX Output Resistance Tuning value found on > > the eUSB2 repeater on Qualcomm PMICs. > > > > Signed-off-by: Luca Weiss <[email protected]> > > --- > > Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml | 6 > > ++++++ > > 1 file changed, 6 insertions(+) > > > > diff --git > > a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml > > b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml > > index > > 27f064a71c9fb8cb60e8333fb285f0510a4af94f..6bfd11657e2992735998063b3ca390e04a03930d > > 100644 > > --- a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml > > +++ b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml > > @@ -52,6 +52,12 @@ properties: > > minimum: 0 > > maximum: 7 > > > > + qcom,tune-res-fsdif: > > + $ref: /schemas/types.yaml#/definitions/uint8 > > + description: FS Differential TX Output Resistance Tuning > > Resistance is in Ohms, tuning could be in dB, so I wonder what are the > actual units here. Neither commit msg nor this description helps me to > understand that.
I checked and the values are in Ohms. Best regards, Krzysztof
