Add a selftest to verify bonding behavior when lacp_active is set to off.
Signed-off-by: Hangbin Liu <[email protected]>
---
.../drivers/net/bonding/bond_passive_lacp.sh | 21 +++++
.../drivers/net/bonding/bond_topo_lacp.sh | 77 +++++++++++++++++++
2 files changed, 98 insertions(+)
create mode 100755
tools/testing/selftests/drivers/net/bonding/bond_passive_lacp.sh
create mode 100644
tools/testing/selftests/drivers/net/bonding/bond_topo_lacp.sh
diff --git a/tools/testing/selftests/drivers/net/bonding/bond_passive_lacp.sh
b/tools/testing/selftests/drivers/net/bonding/bond_passive_lacp.sh
new file mode 100755
index 000000000000..4cf8a5999aaa
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/bond_passive_lacp.sh
@@ -0,0 +1,21 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+#
+# Testing if bond works with lacp_active = off
+
+lib_dir=$(dirname "$0")
+source ${lib_dir}/bond_topo_lacp.sh
+
+trap cleanup EXIT
+setup_topo_lacp
+
+lacp_bond_reset "${c_ns}" "lacp_active off"
+# make sure the switch state is not expired [A,T,G,S,Ex]
+if slowwait 15 ip netns exec ${s_ns} grep -q 'port state: 143'
/proc/net/bonding/bond0; then
+ RET=1
+else
+ RET=0
+fi
+log_test "bond 802.3ad" "lacp_active off"
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/drivers/net/bonding/bond_topo_lacp.sh
b/tools/testing/selftests/drivers/net/bonding/bond_topo_lacp.sh
new file mode 100644
index 000000000000..33dca6ebdc4b
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/bond_topo_lacp.sh
@@ -0,0 +1,77 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Topology for Bond mode 802.3ad testing
+#
+# +-------------------------+
+# | bond0 | Switch
+# | + | 192.0.2.254/24
+# | eth0 | eth1 | 2001:db8::254/24
+# | +---+---+ |
+# | | | |
+# +-------------------------+
+# | |
+# +-------------------------+
+# | | | |
+# | +---+---+ | Client
+# | eth0 | eth1 | 192.0.2.1/24
+# | + | 2001:db8::1/24
+# | bond0 |
+# +-------------------------+
+
+REQUIRE_MZ=no
+NUM_NETIFS=0
+lib_dir=$(dirname "$0")
+source "$lib_dir"/../../../net/forwarding/lib.sh
+
+s_ip4="192.0.2.254"
+c_ip4="192.0.2.1"
+s_ip6="2001:db8::254"
+c_ip6="2001:db8::1"
+
+switch_create()
+{
+ ip netns exec ${s_ns} sysctl -q
net.ipv6.conf.default.keep_addr_on_down=1
+ ip -n ${s_ns} link add eth0 type veth peer name eth0 netns ${c_ns}
+ ip -n ${s_ns} link add eth1 type veth peer name eth1 netns ${c_ns}
+ ip -n ${s_ns} link add bond0 type bond mode 802.3ad miimon 100
lacp_active on lacp_rate fast
+ ip -n ${s_ns} link set eth0 master bond0
+ ip -n ${s_ns} link set eth1 master bond0
+ ip -n ${s_ns} addr add ${s_ip4}/24 dev bond0
+ ip -n ${s_ns} addr add ${s_ip6}/24 dev bond0
+ ip -n ${s_ns} link set bond0 up
+}
+
+client_create()
+{
+ ip netns exec ${c_ns} sysctl -q
net.ipv6.conf.default.keep_addr_on_down=1
+ ip -n ${c_ns} link add bond0 type bond mode 802.3ad miimon 100
lacp_active on lacp_rate fast
+ ip -n ${c_ns} link set eth0 master bond0
+ ip -n ${c_ns} link set eth1 master bond0
+ ip -n ${c_ns} addr add ${c_ip4}/24 dev bond0
+ ip -n ${c_ns} addr add ${c_ip6}/24 dev bond0
+ ip -n ${c_ns} link set bond0 up
+}
+
+setup_topo_lacp()
+{
+ setup_ns s_ns c_ns
+ defer cleanup_all_ns
+
+ switch_create
+ client_create
+}
+
+# Reset bond with and options
+lacp_bond_reset()
+{
+ local netns="$1"
+ local param="$2"
+
+ ip -n ${netns} link set bond0 down
+ ip -n ${netns} link set bond0 type bond $param
+ ip -n ${netns} link set bond0 up
+
+ # Wait for IPv6 address ready as it needs DAD
+ slowwait 10 ip netns exec ${c_ns} ping6 ${s_ip6} -c 1 -W 0.1 &>
/dev/null
+}
--
2.46.0
