Document the FS Differential TX Output Resistance Tuning value found on the eUSB2 repeater on Qualcomm PMICs. The tuning values have special meanings, being different offsets of the resistance to the default value in Ohms but the exact meaning is not relevant here, as the correct tuning is determined by hardware engineers to make sure the electrical properties are as expected.
Signed-off-by: Luca Weiss <[email protected]> --- Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml index 27f064a71c9fb8cb60e8333fb285f0510a4af94f..6bfd11657e2992735998063b3ca390e04a03930d 100644 --- a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml @@ -52,6 +52,12 @@ properties: minimum: 0 maximum: 7 + qcom,tune-res-fsdif: + $ref: /schemas/types.yaml#/definitions/uint8 + description: FS Differential TX Output Resistance Tuning + minimum: 0 + maximum: 7 + required: - compatible - reg -- 2.50.0
