On 19/07/2025 00:12, Duje Mihanović wrote:
> Different bus clocks require different pinctrl states to remain stable.
> Add support for selecting between a default and UHS state according to
> the bus clock.
>
> Signed-off-by: Duje Mihanović <[email protected]>
> ---
> drivers/mmc/host/sdhci-pxav3.c | 30 +++++++++++++++++++++++++++++-
> include/linux/platform_data/pxa_sdhci.h | 7 +++++++
> 2 files changed, 36 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
> index
> 3fb56face3d81259b693c8569682d05c95be2880..0e1bd75a1252e5559deb0b3caabcdc75919aee3d
> 100644
> --- a/drivers/mmc/host/sdhci-pxav3.c
> +++ b/drivers/mmc/host/sdhci-pxav3.c
> @@ -20,9 +20,11 @@
> #include <linux/module.h>
> #include <linux/of.h>
> #include <linux/of_device.h>
> +#include <linux/pinctrl/consumer.h>
> #include <linux/pm.h>
> #include <linux/pm_runtime.h>
> #include <linux/mbus.h>
> +#include <linux/units.h>
>
> #include "sdhci.h"
> #include "sdhci-pltfm.h"
> @@ -313,8 +315,24 @@ static void pxav3_set_power(struct sdhci_host *host,
> unsigned char mode,
> mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
> }
>
> +static void pxav3_set_clock(struct sdhci_host *host, unsigned int clock)
> +{
> + struct platform_device *pdev = to_platform_device(mmc_dev(host->mmc));
> + struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
> +
> + if (clock < 100 * HZ_PER_MHZ) {
> + if (!IS_ERR(pdata->pins_default))
> + pinctrl_select_state(pdata->pinctrl,
> pdata->pins_default);
> + } else {
> + if (!IS_ERR(pdata->pins_uhs))
> + pinctrl_select_state(pdata->pinctrl, pdata->pins_uhs);
> + }
> +
> + sdhci_set_clock(host, clock);
> +}
> +
> static const struct sdhci_ops pxav3_sdhci_ops = {
> - .set_clock = sdhci_set_clock,
> + .set_clock = pxav3_set_clock,
> .set_power = pxav3_set_power,
> .platform_send_init_74_clocks = pxav3_gen_init_74_clocks,
> .get_max_clock = sdhci_pltfm_clk_get_max_clock,
> @@ -441,6 +459,16 @@ static int sdhci_pxav3_probe(struct platform_device
> *pdev)
> host->mmc->pm_caps |= pdata->pm_caps;
> }
>
> + pdata->pinctrl = devm_pinctrl_get(dev);
> + if (IS_ERR(pdata->pinctrl))
> + dev_warn(dev, "could not get pinctrl handle\n");
> + pdata->pins_default = pinctrl_lookup_state(pdata->pinctrl, "default");
Mustn't use pdata->pinctrl if it is not valid
> + if (IS_ERR(pdata->pins_default))
> + dev_warn(dev, "could not get default state\n");
> + pdata->pins_uhs = pinctrl_lookup_state(pdata->pinctrl, "state_uhs");
Mustn't use pdata->pinctrl if it is not valid, and probably don't
want to change pin state unless both pdata->pins_default and
pdata->pins_uhs are valid
> + if (IS_ERR(pdata->pins_uhs))
> + dev_warn(dev, "could not get uhs state\n");
I'd suggest dev_dbg() rather than dev_warn() for all the
new dev_warn()s
> +
> pm_runtime_get_noresume(&pdev->dev);
> pm_runtime_set_active(&pdev->dev);
> pm_runtime_set_autosuspend_delay(&pdev->dev, PXAV3_RPM_DELAY_MS);
> diff --git a/include/linux/platform_data/pxa_sdhci.h
> b/include/linux/platform_data/pxa_sdhci.h
> index
> 899457cee425d33f82606f0b8c280003bc73d48d..540aa36db11243719707bdf22db23a8e2035674d
> 100644
> --- a/include/linux/platform_data/pxa_sdhci.h
> +++ b/include/linux/platform_data/pxa_sdhci.h
> @@ -35,6 +35,9 @@
> * @quirks: quirks of platfrom
> * @quirks2: quirks2 of platfrom
> * @pm_caps: pm_caps of platfrom
> + * @pinctrl: pinctrl handle
> + * @pins_default: default pinctrl state
> + * @pins_uhs: pinctrl state for fast (>100 MHz) bus clocks
> */
> struct sdhci_pxa_platdata {
> unsigned int flags;
> @@ -47,5 +50,9 @@ struct sdhci_pxa_platdata {
> unsigned int quirks;
> unsigned int quirks2;
> unsigned int pm_caps;
> +
> + struct pinctrl *pinctrl;
> + struct pinctrl_state *pins_default;
> + struct pinctrl_state *pins_uhs;
> };
> #endif /* _PXA_SDHCI_H_ */
>
