From: Alexander Martinz <[email protected]> As with all other devices in commit 7747a49db7e5 ("arm64: dts: qcom: sc7280-*: Remove thermal zone polling delays"), apply the same change to this device as the delays are assumed to be equal to "0" if not set.
Signed-off-by: Alexander Martinz <[email protected]> Signed-off-by: Luca Weiss <[email protected]> --- arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts | 14 -------------- 1 file changed, 14 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts b/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts index 8d45e6ac0e44..0d331bda4a82 100644 --- a/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts +++ b/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts @@ -130,8 +130,6 @@ rmtfs_mem: rmtfs@f8500000 { thermal-zones { camera-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pmk8350_adc_tm 2>; trips { @@ -144,8 +142,6 @@ active-config0 { }; chg-skin-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm7250b_adc_tm 0>; trips { @@ -158,8 +154,6 @@ active-config0 { }; conn-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm7250b_adc_tm 1>; trips { @@ -172,8 +166,6 @@ active-config0 { }; quiet-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pmk8350_adc_tm 1>; trips { @@ -186,8 +178,6 @@ active-config0 { }; rear-cam-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pmk8350_adc_tm 4>; trips { @@ -200,8 +190,6 @@ active-config0 { }; sdm-skin-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pmk8350_adc_tm 3>; trips { @@ -214,8 +202,6 @@ active-config0 { }; xo-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pmk8350_adc_tm 0>; trips { -- 2.51.0
