On Thu, 31 Jan 2008, Boaz Harrosh wrote: > On Thu, Jan 31 2008 at 19:29 +0200, Ingo Molnar <[EMAIL PROTECTED]> wrote: > > FYI, automated testing found the following build breakage: > > > > drivers/scsi/NCR53C9x.c: In function 'esp_get_dmabufs': > > drivers/scsi/NCR53C9x.c:913: error: 'Scsi_Cmnd' has no member named 'use_sg' > > drivers/scsi/NCR53C9x.c:914: error: 'Scsi_Cmnd' has no member named > > 'request_bufflen' > > > > config attached. > > > > Ingo > > > Cc linux-scsi mailing list. > > This driver and others are scheduled to be removed in the scsi-pending tree > and are awaiting ACKs from - disappeared - maintainers.
Well, buried in some other activities. You certainly have had my ack to remove dec_esp.c already and I started to work on replacement front-end drivers long ago. Unfortunately one of the three hardware configurations to be supported by the front-ends does not fit the interrupt handling model implemented by the esp_scsi.c core. Or it is actually the other way round as you cannot adjust hardware to fit the driver, so I am in a process of rewriting the core a little bit in this respect -- the core switches to interrupt polling under some circumstances and does not expect a higher-priority interrupt of a different kind to arrive from the bus master controller the SCSI chips are attached to instead. Being no SCSI expert though I have to study the SCSI spec well enough to understand some bits and I am somewhat distracted these days, so it may take a while yet. It is at the highest priority on my to-do list though. Maciej -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/