From: Robert Eckelmann <[email protected]> We know these devices are present, most of them are supported by downstream and close to the mainline kernels.
This is very handy when rebasing the integration tree with the support. No functional changes. Reviewed-by: David Heidelberg <[email protected]> Signed-off-by: Robert Eckelmann <[email protected]> --- .../dts/qcom/sdm845-xiaomi-beryllium-common.dtsi | 29 ++++++++++++++++------ 1 file changed, 22 insertions(+), 7 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi index ab450d44b3f6..3444908b4a6b 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi @@ -227,6 +227,12 @@ vreg_l26a_1p2: ldo26 { }; }; +&cci_i2c0 { + status = "okay"; + + /* IMX363 @ 10 */ +}; + &cdsp_pas { status = "okay"; firmware-name = "qcom/sdm845/Xiaomi/beryllium/cdsp.mbn"; @@ -261,6 +267,22 @@ &ibb { qcom,discharge-resistor-kohms = <300>; }; +&ipa { + qcom,gsi-loader = "self"; + memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/sdm845/beryllium/ipa_fws.mbn"; + + status = "okay"; +}; + +&i2c5 { + clock-frequency = <400000>; + + status = "okay"; + + /* TAS2559 @ 4C */ +}; + &lab { regulator-min-microvolt = <4600000>; regulator-max-microvolt = <6000000>; @@ -312,13 +334,6 @@ &mss_pil { "qcom/sdm845/Xiaomi/beryllium/modem.mbn"; }; -&ipa { - qcom,gsi-loader = "self"; - memory-region = <&ipa_fw_mem>; - firmware-name = "qcom/sdm845/Xiaomi/beryllium/ipa_fws.mbn"; - status = "okay"; -}; - &pm8998_gpios { vol_up_pin_a: vol-up-active-state { pins = "gpio6"; -- 2.52.0
