Hi David, Thank you for the patch
On Tue, Jan 06, 2026 at 04:14:05PM +0100, David Heidelberg via B4 Relay wrote: > From: David Heidelberg <[email protected]> > > We need to set correct mode for PLL to calculate correct frequency. > Signalling mode is known at this point, so use it for that. > > Fixes: 47b6eaf36eba ("media: ccs-pll: Differentiate between CSI-2 D-PHY and > C-PHY") > Signed-off-by: David Heidelberg <[email protected]> > --- > drivers/media/i2c/ccs/ccs-core.c | 9 ++++++++- > 1 file changed, 8 insertions(+), 1 deletion(-) > > diff --git a/drivers/media/i2c/ccs/ccs-core.c > b/drivers/media/i2c/ccs/ccs-core.c > index f8523140784c7..2d689e47ed094 100644 > --- a/drivers/media/i2c/ccs/ccs-core.c > +++ b/drivers/media/i2c/ccs/ccs-core.c > @@ -3425,7 +3425,14 @@ static int ccs_probe(struct i2c_client *client) > sensor->scale_m = CCS_LIM(sensor, SCALER_N_MIN); > > /* prepare PLL configuration input values */ > - sensor->pll.bus_type = CCS_PLL_BUS_TYPE_CSI2_DPHY; > + switch (sensor->hwcfg.csi_signalling_mode) { > + case CCS_CSI_SIGNALING_MODE_CSI_2_CPHY: > + sensor->pll.bus_type = CCS_PLL_BUS_TYPE_CSI2_CPHY; > + break; > + case CCS_CSI_SIGNALING_MODE_CSI_2_DPHY: > + sensor->pll.bus_type = CCS_PLL_BUS_TYPE_CSI2_DPHY; > + break; I think it is safer to add a default case here -- Kind Regards Mehdi Djait
