On Tue, Jan 13, 2026 at 5:15 PM Stafford Horne <[email protected]> wrote: > > Add a device tree binding for the opencores GPIO controller. > > On FPGA Development boards with GPIOs the OpenRISC architecture uses the > opencores gpio verilog rtl which is compatible with the MMIO GPIO driver. > > Link: https://opencores.org/projects/gpio > Signed-off-by: Stafford Horne <[email protected]> > Reviewed-by: Linus Walleij <[email protected]> > Reviewed-by: Geert Uytterhoeven <[email protected]> > --- > Since v3: > - Removed example. > - Re-order this patch to be before adding compatible string to driver as per > device tree binding patch rules. > - Add Reviewed-by's. > Since v2: > - Fixup (replace) patch to simply add opencores,gpio and add an example. > (It was incorrect to specifying opencores,gpio with brcm,bcm6345-gpio > as opencores,gpio is not the same hardware, its 8-bit vs 32-bit) > Since v1: > - Fix schema to actually match the example. > > Documentation/devicetree/bindings/gpio/gpio-mmio.yaml | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml > b/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml > index ee5d5d25ae82..a8823ca65e78 100644 > --- a/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml > +++ b/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml > @@ -23,6 +23,7 @@ properties: > - ni,169445-nand-gpio > - wd,mbl-gpio # Western Digital MyBook Live memory-mapped GPIO > controller > - intel,ixp4xx-expansion-bus-mmio-gpio > + - opencores,gpio > > big-endian: true > > -- > 2.51.0 >
This is not a follow-up patch. Please rebase your fix on top of linux-next. I already have the previous patch in my tree and will not be rebasing the entire for-next branch. Bartosz
