This patch series adds support for Capella cm36686 and cm36672p ambient light and proximity sensors.
Capella cm36686 is a combined ambient light and proximity sensor with adjustable integration time, interrupt and hysteresis support. It has the slave address of 0x60. cm36672p is fully compatible with cm36686, except that it is a proximity-only sensor. Unfortunately, datasheets for these sensors are not publicly available. This code is based on Android downstream kernels for devices which did use these sensors and a previous submission for cm36672p to mailing lists: https://github.com/LineageOS/android_kernel_xiaomi_msm8992/blob/cm-14.1/drivers/iio/light/cm36686.c https://github.com/shakalaca/ASUS_ZenFone_ZD551KL/blob/android-6.0/kernel/drivers/input/misc/cm36283.c https://lore.kernel.org/linux-iio/[email protected]/ The following code has been tested on Asus ZenFone 2 Laser/Selfie, which uses cm36686 as its ambient light and proximity sensor. This is my first driver on Linux, so I appreciate all the feedback and patience I receive. Changes since v1: - Add copyright information. - Sort includes in alphabetical order. - Add trailing commas. - Remove blank spaces where unnecessary. - Add a fallback for capella,cm36686 compatible. - Make power supplies required. - Add '-microamp' suffix for capella,proximity-led-current. - Replace local caching and i2c_smbus calls with regmap API. - Make interrupt optional. - Add action or reset only after setup is done. - Replace mutex_[un]lock calls with guard(mutex) - Add comments on where mutex is used. - Add comments on proximity register defaults. - Remove default proximity sensor duty ratio and integration time. Those were taken from the testing device and had no real reason to be there. - Replace dev_err_probe on device's part ID with a warning. - Replace chip->supplies property with a single devm_regulator_bulk_get_enable call. - Use individual structs instead of array-style device info - Remove enums which are no longer used. Signed-off-by: Erikas Bitovtas <[email protected]> --- Erikas Bitovtas (2): dt-bindings: Add binding document for cm36686 iio: light: Add support for Capella cm36686 and cm36672p sensors .../bindings/iio/light/capella,cm36686.yaml | 97 +++ drivers/iio/light/Kconfig | 11 + drivers/iio/light/Makefile | 1 + drivers/iio/light/cm36686.c | 940 +++++++++++++++++++++ 4 files changed, 1049 insertions(+) --- base-commit: 9845cf73f7db6094c0d8419d6adb848028f4a921 change-id: 20260201-cm36686-fc7a8385f1cd Best regards, -- Erikas Bitovtas <[email protected]>
