On Sat, Mar 07, 2026 at 06:23:12PM +0100, Paul Adam via B4 Relay wrote: > From: Paul Adam <[email protected]> > > Add an initial device tree for Wiko PULP 4G. > Includes support for: > - UART > - USB (no OTG) > - Internal storage > - MicroSD > - Volume keys + Power button > - Touchscreen > - Backlight > - Accelerometer: Invensense MPU6880 > - Magnetometer: Asahi Kasei AK09911 > - Hall sensor: Rohm BU52021HFV > - Proximity sensor > - Vibrator > - Earpiece > - Microphone 1 > - Headphones > - Wifi > - Bluetooth > - GPU > > Signed-off-by: Paul Adam <[email protected]> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > arch/arm64/boot/dts/qcom/msm8916-wiko-chuppito.dts | 315 > +++++++++++++++++++++ > 2 files changed, 316 insertions(+) > > [...] > diff --git a/arch/arm64/boot/dts/qcom/msm8916-wiko-chuppito.dts > b/arch/arm64/boot/dts/qcom/msm8916-wiko-chuppito.dts > new file mode 100644 > index 000000000000..d927bae2b208 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/msm8916-wiko-chuppito.dts > @@ -0,0 +1,315 @@ > [...] > +&sound { > + audio-routing = "AMIC1", "MIC BIAS Internal1", > + "AMIC2", "MIC BIAS Internal2", > + "AMIC3", "MIC BIAS Internal1";
Sorry, just noticed this now: This seems a bit suspicious (I would expect "MIC BIAS Internal3"), have you tested if the secondary microphone works? Thanks, Stephan
