From: Casey Connolly <[email protected]> The SHIFT6mq features an sdcard slot, add it.
Signed-off-by: Casey Connolly <[email protected]> Signed-off-by: David Heidelberg <[email protected]> --- arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts | 43 +++++++++++++++++++++++ 1 file changed, 43 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts index 51b041f91d3e2..1f21da310b762 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts @@ -600,6 +600,23 @@ &qupv3_id_1 { status = "okay"; }; +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + + bus-width = <4>; + /* card detection is broken, but because the battery must be removed + * to insert the card, we use this rather than the broken-cd property + * which would just waste CPU cycles polling. + */ + non-removable; +}; + &slpi_pas { firmware-name = "qcom/sdm845/SHIFT/axolotl/slpi.mbn"; @@ -609,6 +626,32 @@ &slpi_pas { &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; + sdc2_default_state: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + + sdc2_card_det_n: sd-card-det-n-state { + pins = "gpio126"; + function = "gpio"; + bias-pull-up; + }; + sde_dsi_active: sde-dsi-active-state { pins = "gpio6", "gpio11"; function = "gpio"; -- 2.53.0
