From: Cosmin Ratiu <[email protected]> Adds a Python selftest using the YNL devlink API to verify the devlink rate ops. The test requires a bond device given in the config as NETIF containing two PFs. Test setup will then create 1 VF on each PF and verify the various rate commands.
./devlink_rate_cross_esw.py TAP version 13 1..3 ok 1 devlink_rate_cross_esw.test_same_esw_parent ok 2 devlink_rate_cross_esw.test_cross_esw_parent ok 3 devlink_rate_cross_esw.test_tx_rates_on_cross_esw Tests will be skipped when the preconditions aren't met, when the devlink API is too old or when the devices don't appear to support cross-esw scheduling (detected via EOPNOTSUPP). Signed-off-by: Cosmin Ratiu <[email protected]> Reviewed-by: Carolina Jubran <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> --- .../testing/selftests/drivers/net/hw/Makefile | 1 + .../drivers/net/hw/devlink_rate_cross_esw.py | 300 ++++++++++++++++++ 2 files changed, 301 insertions(+) create mode 100755 tools/testing/selftests/drivers/net/hw/devlink_rate_cross_esw.py diff --git a/tools/testing/selftests/drivers/net/hw/Makefile b/tools/testing/selftests/drivers/net/hw/Makefile index 3c97dac9baaa..361fbb9fd44b 100644 --- a/tools/testing/selftests/drivers/net/hw/Makefile +++ b/tools/testing/selftests/drivers/net/hw/Makefile @@ -20,6 +20,7 @@ TEST_GEN_FILES := \ TEST_PROGS = \ csum.py \ devlink_port_split.py \ + devlink_rate_cross_esw.py \ devlink_rate_tc_bw.py \ devmem.py \ ethtool.sh \ diff --git a/tools/testing/selftests/drivers/net/hw/devlink_rate_cross_esw.py b/tools/testing/selftests/drivers/net/hw/devlink_rate_cross_esw.py new file mode 100755 index 000000000000..0f3b4516c3b7 --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/devlink_rate_cross_esw.py @@ -0,0 +1,300 @@ +#!/usr/bin/env python3 +# SPDX-License-Identifier: GPL-2.0 + +""" +Devlink Rate Cross-eswitch Scheduling Test Suite +================================================== + +Control-plane tests for cross-eswitch TX scheduling via devlink-rate. +Validates that VFs from different PFs on the same chip can share +rate groups using the cross-device parent-dev attribute. + +Preconditions: +- NETIF points to a bond device with exactly two interfaces. +- the interfaces must be two PFs from different devices sharing the same chip. +- (for mlx5): the two interfaces are in switchdev mode and configured in a LAG: + - devlink dev eswitch set $DEV1 mode switchdev + - devlink dev eswitch set $DEV2 mode switchdev + - devlink dev param set $DEV1 name esw_multiport value 1 cmode runtime + - devlink dev param set $DEV2 name esw_multiport value 1 cmode runtime +- test cases will be skipped if: + - the number of interfaces in the bond device is != 2. + - the kernel doesn't support devlink rates. + - the devlink API doesn't support cross-device parents (ENODEV). + - cross-esw rate scheduling returns EOPNOTSUPP. +""" + +import errno +import glob +import os +import time + +from lib.py import ksft_pr, ksft_eq, ksft_run, ksft_exit +from lib.py import KsftSkipEx, KsftFailEx +from lib.py import NetDrvEnv, DevlinkFamily +from lib.py import NlError +from lib.py import cmd, defer, ip, tool + + +# --- Discovery and setup --- + + +def get_bond_slaves(bond_ifname): + """Returns sorted list of slave netdev names for a bond.""" + pattern = f"/sys/class/net/{bond_ifname}/lower_*" + lowers = glob.glob(pattern) + if not lowers: + raise KsftSkipEx(f"No bond slaves for {bond_ifname}") + slaves = [] + for path in sorted(lowers): + name = os.path.basename(path) + if name.startswith("lower_"): + name = name[len("lower_"):] + slaves.append(name) + return slaves + + +def discover_pfs(cfg): + """Discovers both PFs from bond slaves.""" + slaves = get_bond_slaves(cfg.ifname) + if len(slaves) != 2: + raise KsftSkipEx(f"Need 2 bond slaves, found {len(slaves)}") + + pf0, pf1 = slaves[0], slaves[1] + ksft_pr(f"PF0: {pf0} PF1: {pf1}") + return pf0, pf1 + + +def get_pci_addr(ifname): + """Resolves PCI address for a network interface.""" + return os.path.basename(os.path.realpath(f"/sys/class/net/{ifname}/device")) + + +def get_vf_port_index(pf_pci): + """Finds devlink port-index for vf0 under pf_pci.""" + ports = tool("devlink", "port show", json=True)["port"] + for port_name, props in ports.items(): + if port_name.startswith(f"pci/{pf_pci}/") and props.get("vfnum") == 0: + return int(port_name.split("/")[-1]) + raise KsftSkipEx(f"VF port not found for {pf_pci}") + + +def cleanup_esw(pf): + """Removes VFs if created by tests.""" + cmd(f"echo 0 > /sys/class/net/{pf}/device/sriov_numvfs", shell=True, fail=False) + + +def setup_esw(pf): + """Creates 1 VF on 'pf'.""" + path = f"/sys/class/net/{pf}/device/sriov_numvfs" + cmd(f"echo 0 > {path}", shell=True) + cmd(f"echo 1 > {path}", shell=True) + time.sleep(2) + + vf_dir = f"/sys/class/net/{pf}/device/virtfn0/net" + entries = os.listdir(vf_dir) if os.path.isdir(vf_dir) else [] + if not entries: + raise KsftSkipEx(f"VF not found for {pf}") + ip(f"link set dev {entries[0]} up") + + pf_pci = get_pci_addr(pf) + vf_idx = get_vf_port_index(pf_pci) + ksft_pr(f"Created VF {vf_idx} on PF {pf} ({pf_pci})") + return pf_pci, vf_idx + + +# --- Rate operation helpers --- + + +def rate_new(devnl, dev_pci, node_name, **kwargs): + """Creates rate node.""" + params = { + "bus-name": "pci", + "dev-name": dev_pci, + "rate-node-name": node_name, + } + params.update(kwargs) + try: + devnl.rate_new(params) + except NlError as e: + if e.error == errno.EOPNOTSUPP: + raise KsftSkipEx("rate_new not supported") from e + raise KsftFailEx("rate_new failed") from e + + +def rate_get(devnl, dev_pci, node_name): + """Gets rate node.""" + params = { + "bus-name": "pci", + "dev-name": dev_pci, + "rate-node-name": node_name, + } + return devnl.rate_get(params) + + +def rate_get_leaf(devnl, dev_pci, port_index): + """Gets rate leaf (VF).""" + params = { + "bus-name": "pci", + "dev-name": dev_pci, + "port-index": port_index, + } + return devnl.rate_get(params) + + +def rate_del(devnl, dev_pci, node_name): + """Deletes rate node.""" + devnl.rate_del({ + "bus-name": "pci", + "dev-name": dev_pci, + "rate-node-name": node_name, + }) + + +def rate_set_leaf(devnl, dev_pci, port_index, **kwargs): + """Sets rate attributes on a leaf (VF).""" + params = { + "bus-name": "pci", + "dev-name": dev_pci, + "port-index": port_index, + } + params.update(kwargs) + try: + devnl.rate_set(params) + except NlError as e: + if e.error == errno.EOPNOTSUPP: + raise KsftSkipEx("rate_set not supported") from e + raise KsftFailEx("rate_set failed") from e + + +def rate_set_leaf_parent(devnl, dev_pci, port_index, + parent_name, parent_dev_pci=None): + """Sets a leaf's parent, optionally cross-esw.""" + params = { + "bus-name": "pci", + "dev-name": dev_pci, + "port-index": port_index, + "rate-parent-node-name": parent_name, + } + if parent_dev_pci: + params["parent-dev"] = { + "bus-name": "pci", + "dev-name": parent_dev_pci, + } + try: + devnl.rate_set(params) + except NlError as e: + if e.error == errno.EOPNOTSUPP: + raise KsftSkipEx("rate_set not supported") from e + if parent_dev_pci and e.error == errno.ENODEV: + raise KsftSkipEx("Cross-esw scheduling not supported") from e + raise KsftFailEx("rate_set failed") from e + + +def rate_clear_leaf_parent(devnl, dev_pci, port_index): + """Clears a leaf's parent.""" + rate_set_leaf_parent(devnl, dev_pci, port_index, "") + + +def rate_set_node(devnl, dev_pci, node_name, **kwargs): + """Sets rate attributes on a node.""" + params = { + "bus-name": "pci", + "dev-name": dev_pci, + "rate-node-name": node_name, + } + params.update(kwargs) + devnl.rate_set(params) + + +# --- Test cases --- + + +def test_same_esw_parent(cfg): + """Assigns PF0's VF to PF0's group (same esw baseline).""" + pf0, _ = discover_pfs(cfg) + pf0_pci, vf0_idx = setup_esw(pf0) + defer(cleanup_esw, pf0) + + rate_new(cfg.devnl, pf0_pci, "group0") + defer(rate_del, cfg.devnl, pf0_pci, "group0") + ksft_pr("rate-new succeeded") + + rate_set_leaf_parent(cfg.devnl, pf0_pci, vf0_idx, "group0") + defer(rate_clear_leaf_parent, cfg.devnl, pf0_pci, vf0_idx) + + ksft_pr("Same-esw parent assignment succeeded") + + +def test_cross_esw_parent(cfg): + """Sets cross-esw parent, then clear it.""" + pf0, pf1 = discover_pfs(cfg) + pf0_pci, _ = setup_esw(pf0) + defer(cleanup_esw, pf0) + pf1_pci, vf1_idx = setup_esw(pf1) + defer(cleanup_esw, pf1) + + rate_new(cfg.devnl, pf0_pci, "group1") + defer(rate_del, cfg.devnl, pf0_pci, "group1") + ksft_pr("rate-new succeeded") + + rate_set_leaf_parent(cfg.devnl, pf1_pci, vf1_idx, + "group1", parent_dev_pci=pf0_pci) + defer(rate_clear_leaf_parent, cfg.devnl, pf1_pci, vf1_idx) + + ksft_pr("Cross-esw parent set and clear succeeded") + + +def test_tx_rates_on_cross_esw(cfg): + """Sets tx_max on group and tx_share on leaves in a cross-esw setup.""" + pf0, pf1 = discover_pfs(cfg) + pf0_pci, vf0_idx = setup_esw(pf0) + defer(cleanup_esw, pf0) + pf1_pci, vf1_idx = setup_esw(pf1) + defer(cleanup_esw, pf1) + + rate_new(cfg.devnl, pf0_pci, "group2", **{"rate-tx-max": 10000000}) + defer(rate_del, cfg.devnl, pf0_pci, "group2") + ksft_pr("rate-new succeeded") + + rate_set_leaf_parent(cfg.devnl, pf1_pci, vf1_idx, + "group2", parent_dev_pci=pf0_pci) + defer(rate_clear_leaf_parent, cfg.devnl, pf1_pci, vf1_idx) + ksft_pr("set parent cross-esw succeeded") + + rate_set_leaf_parent(cfg.devnl, pf0_pci, vf0_idx, "group2") + defer(rate_clear_leaf_parent, cfg.devnl, pf0_pci, vf0_idx) + ksft_pr("set parent same esw succeeded") + + rate_set_leaf(cfg.devnl, pf0_pci, vf0_idx, **{"rate-tx-share": 1000000}) + rate = rate_get_leaf(cfg.devnl, pf0_pci, vf0_idx) + ksft_eq(rate["rate-tx-share"], 1000000) + rate_set_leaf(cfg.devnl, pf1_pci, vf1_idx, **{"rate-tx-share": 2000000}) + rate = rate_get_leaf(cfg.devnl, pf1_pci, vf1_idx) + ksft_eq(rate["rate-tx-share"], 2000000) + rate_set_node(cfg.devnl, pf0_pci, "group2", **{"rate-tx-max": 250000000}) + rate = rate_get(cfg.devnl, pf0_pci, "group2") + ksft_eq(rate["rate-tx-max"], 250000000) + + ksft_pr("tx_max and tx_share set on cross-esw group") + + +def main() -> None: + """Main function.""" + + with NetDrvEnv(__file__, nsim_test=False) as cfg: + cfg.devnl = DevlinkFamily() + + ksft_run( + cases=[ + test_same_esw_parent, + test_cross_esw_parent, + test_tx_rates_on_cross_esw, + ], + args=(cfg,), + ) + ksft_exit() + + +if __name__ == "__main__": + main() -- 2.44.0
