On 4/13/26 8:55 PM, Antony Kurniawan Soemardi via B4 Relay wrote: > From: Antony Kurniawan Soemardi <[email protected]> > > Add the Secure Channel Manager firmware device node to the MSM8960 > device tree. The SCM is required for secure communication between the > application processor and other subsystems. > > Tested-by: Rudraksha Gupta <[email protected]> > Signed-off-by: Antony Kurniawan Soemardi <[email protected]> > --- > arch/arm/boot/dts/qcom/qcom-msm8960.dtsi | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi > b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi > index 1d5e97b6aa4b..bc3fd55e524a 100644 > --- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi > +++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi > @@ -77,6 +77,15 @@ l2: l2-cache { > }; > }; > > + firmware { > + scm { > + compatible = "qcom,scm-msm8960", "qcom,scm"; > + > + clocks = <&rpmcc RPM_DAYTONA_FABRIC_CLK>;
I'm wondering if this should be an interconnect resource, but from a quick grepping, I think this is always supposed to be @ 64 MHz so perhaps not really (please tell me if you know more) Konrad
