On Tue, 14 Apr 2026 09:15:57 -0700, Ben Levinsky wrote:
> Describe an AMD MicroBlaze remote processor controlled
> through the remoteproc framework.
>
> The binding models the MicroBlaze remoteproc device as a
> child node whose reg property describes the executable firmware
> memory window in the MicroBlaze-local address space. The parent bus
> node provides standard devicetree address translation through ranges
> so Linux can access the same memory through the system physical
> address space.
>
> An active-low reset GPIO holds the MicroBlaze in reset until
> firmware loading completes.
>
> Signed-off-by: Ben Levinsky <[email protected]>
> ---
> .../bindings/remoteproc/amd,microblaze.yaml | 67 +++++++++++++++++++
> 1 file changed, 67 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/remoteproc/amd,microblaze.yaml
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/amd,microblaze.example.dtb:
/: 'compatible' is a required property
from schema $id: http://devicetree.org/schemas/root-node.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/amd,microblaze.example.dtb:
/: 'model' is a required property
from schema $id: http://devicetree.org/schemas/root-node.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/amd,microblaze.example.dtb:
bus@b0000000 (simple-pm-bus): 'anyOf' conditional failed, one must be fixed:
'clocks' is a required property
'power-domains' is a required property
from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml
doc reference errors (make refcheckdocs):
See
https://patchwork.kernel.org/project/devicetree/patch/[email protected]
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
