Samsung Galaxy A52/A72 are devices released on atoll (SM7125) platform in 2021. Add initial device tree for SM7125 Samsung platform with support for: - Framebuffer - GPIO keys - Hall sensor - Vibrator - Regulators - Reset input - Real-time clock - SD card - UFS - USB
Tested-by: Stefan Hansson <[email protected]> Signed-off-by: Erikas Bitovtas <[email protected]> --- arch/arm64/boot/dts/qcom/Makefile | 2 + arch/arm64/boot/dts/qcom/sm7125-samsung-a52q.dts | 20 + arch/arm64/boot/dts/qcom/sm7125-samsung-a72q.dts | 20 + .../arm64/boot/dts/qcom/sm7125-samsung-common.dtsi | 536 +++++++++++++++++++++ 4 files changed, 578 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 1c857bd7991b..abf23bdce7fe 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -345,6 +345,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-laurel-sprout.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-willow.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6375-sony-xperia-murray-pdx225.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm7125-samsung-a52q.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm7125-samsung-a72q.dtb dtb-$(CONFIG_ARCH_QCOM) += sm7125-xiaomi-curtana.dtb dtb-$(CONFIG_ARCH_QCOM) += sm7125-xiaomi-joyeuse.dtb dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb diff --git a/arch/arm64/boot/dts/qcom/sm7125-samsung-a52q.dts b/arch/arm64/boot/dts/qcom/sm7125-samsung-a52q.dts new file mode 100644 index 000000000000..97c19b6a0277 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm7125-samsung-a52q.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SM7125 Samsung Galaxy A52 (a52q) specific device tree source + * + * Copyright (c) 2026, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include "sm7125-samsung-common.dtsi" + +/ { + model = "Samsung Galaxy A52"; + compatible = "samsung,a52q", "qcom,sm7125"; + qcom,board-id = <0x22 0x6>; +}; + +&rmtfs_mem { + reg = <0x0 0xf4f00000 0x0 0x202000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm7125-samsung-a72q.dts b/arch/arm64/boot/dts/qcom/sm7125-samsung-a72q.dts new file mode 100644 index 000000000000..71af8cc66fd1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm7125-samsung-a72q.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SM7125 Samsung Galaxy A72 (a72q) specific device tree source + * + * Copyright (c) 2026, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include "sm7125-samsung-common.dtsi" + +/ { + model = "Samsung Galaxy A72"; + compatible = "samsung,a72q", "qcom,sm7125"; + qcom,board-id = <0x22 0x5>; +}; + +&rmtfs_mem { + reg = <0x0 0xf3700000 0x0 0x202000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm7125-samsung-common.dtsi b/arch/arm64/boot/dts/qcom/sm7125-samsung-common.dtsi new file mode 100644 index 000000000000..512a151fbff9 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm7125-samsung-common.dtsi @@ -0,0 +1,536 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SM7125 Samsung common device tree source + * + * Copyright (c) 2026, The Linux Foundation. All rights reserved. + */ + +#include <dt-bindings/arm/qcom,ids.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include "sm7125.dtsi" +#include "pm6150.dtsi" +#include "pm6150l.dtsi" + +/delete-node/ &rmtfs_mem; +/delete-node/ &ipa_fw_mem; +/delete-node/ &tz_mem; + +/ { + chassis-type = "handset"; + + qcom,msm-id = <QCOM_ID_SM7125 0x0>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer@9c000000 { + compatible = "simple-framebuffer"; + memory-region = <&cont_splash_mem>; + width = <1080>; + height = <2400>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + clocks = <&gcc GCC_DISP_HF_AXI_CLK>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&key_vol_up_default>, <&hall_sensor_default>; + pinctrl-names = "default"; + + button-vol-up { + label = "Volume Up"; + gpios = <&pm6150l_gpios 8 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + }; + + event-hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&pm6150_gpios 10 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + debounce-interval = <15>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + tz_mem: memory@80b00000 { + reg = <0x0 0x80b00000 0x0 0x7100000>; + no-map; + }; + + mpss_mem: memory@8b000000 { + reg = <0x0 0x8b000000 0x0 0x8900000>; + no-map; + }; + + wlan_mem: memory@93900000 { + reg = <0x0 0x93900000 0x0 0x200000>; + no-map; + }; + + ipa_fw_mem: memory@93b00000 { + reg = <0x0 0x93b00000 0x0 0x10000>; + no-map; + }; + + ipa_gsi_region: memory@93b10000 { + reg = <0x0 0x93b10000 0x0 0x5000>; + no-map; + }; + + gpu_mem: memory@93b15000 { + reg = <0x0 0x93b15000 0x0 0x2000>; + no-map; + }; + + adsp_mem: memory@93c00000 { + reg = <0x0 0x93c00000 0x0 0x3e00000>; + no-map; + }; + + camera_region: memory@97a00000 { + reg = <0x0 0x97a00000 0x0 0x500000>; + no-map; + }; + + pil_npu_region: memory@97f00000 { + reg = <0x0 0x97f00000 0x0 0x500000>; + no-map; + }; + + venus_mem: memory@98400000 { + reg = <0x0 0x98400000 0x0 0x500000>; + no-map; + }; + + cdsp_mem: memory@98900000 { + reg = <0x0 0x98900000 0x0 0x1e00000>; + no-map; + }; + + cont_splash_mem: memory@9c000000 { + reg = <0x0 0x9c000000 0x0 (1080 * 2400 * 4)>; + no-map; + }; + + qseecom_region: memory@9e000000 { + reg = <0x0 0x9e000000 0x0 0x2000000>; + no-map; + }; + + pstore_mem: ramoops@b4600000 { + compatible = "ramoops"; + reg = <0x0 0xb4600000 0x0 0x100000>; + record-size = <0x40000>; + console-size = <0x40000>; + ftrace-size = <0x40000>; + pmsg-size = <0x40000>; + }; + + rmtfs_mem: memory { + compatible = "qcom,rmtfs-mem"; + qcom,use-guard-pages; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; + }; + }; + + vibrator { + compatible = "gpio-vibrator"; + enable-gpios = <&tlmm 57 GPIO_ACTIVE_HIGH>; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm6150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_s1a_1p1: smps1 { + regulator-min-microvolt = <1128000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_s4a_1p0: smps4 { + regulator-min-microvolt = <824000>; + regulator-max-microvolt = <1120000>; + }; + + vreg_s5a_2p0: smps5 { + regulator-min-microvolt = <1744000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_l1a_1p2: ldo1 { + regulator-min-microvolt = <1178000>; + regulator-max-microvolt = <1256000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2a_1p0: ldo2 { + regulator-min-microvolt = <944000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3a_1p0: ldo3 { + regulator-min-microvolt = <968000>; + regulator-max-microvolt = <1064000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4a_0p9: ldo4 { + regulator-min-microvolt = <824000>; + regulator-max-microvolt = <928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5a_2p7: ldo5 { + regulator-min-microvolt = <3304000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6a_0p6: ldo6 { + regulator-min-microvolt = <568000>; + regulator-max-microvolt = <648000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_cx_wlan: + vreg_l9a_0p8: ldo9 { + regulator-min-microvolt = <488000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10a_1p8: ldo10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1832000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11a_1p8: ldo11 { + regulator-min-microvolt = <1696000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1696000>; + regulator-max-microvolt = <1952000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13a_1p8: ldo13 { + regulator-min-microvolt = <1696000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1728000>; + regulator-max-microvolt = <1832000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15a_1p8: ldo15 { + regulator-min-microvolt = <1696000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_3p1: ldo17 { + regulator-min-microvolt = <2920000>; + regulator-max-microvolt = <3232000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a_3p0: ldo18 { + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l19a_2p85: ldo19 { + regulator-min-microvolt = <2696000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm6150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_s8c_1p3: smps8 { + regulator-min-microvolt = <1120000>; + regulator-max-microvolt = <1408000>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1616000>; + regulator-max-microvolt = <1984000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_1p3: ldo2 { + regulator-min-microvolt = <1168000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_1p2: ldo3 { + regulator-min-microvolt = <1144000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + + vreg_l4c_1p8: ldo4 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5c_1p8: ldo5 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c_3p0: ldo6 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p95: ldo9 { + regulator-min-microvolt = <2952000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_3p3: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_3p3: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + }; +}; + +&dispcc { + /* HACK: disable until a panel driver is ready to retain simplefb */ + status = "disabled"; +}; + +&pm6150l_gpios { + key_vol_up_default: key-vol-up-default-state { + pins = "gpio8"; + function = "normal"; + input-enable; + bias-pull-up; + power-source = <0>; + }; +}; + +&pm6150_gpios { + hall_sensor_default: hall-sensor-default-state { + pins = "gpio10"; + function = "normal"; + output-disable; + bias-disable; + power-source = <0>; + }; +}; + +&pm6150_pon { + /* + * LinuxLoader fastboot implementation has most of its commands removed + * by Samsung, making it useless. So reboot to Odin download mode instead. + */ + mode-bootloader = <0x15>; +}; + +&pm6150_resin { + linux,code = <KEY_VOLUMEDOWN>; + + status = "okay"; +}; + +&pm6150_rtc { + status = "okay"; +}; + +&qfprom { + vcc-supply = <&vreg_l11a_1p8>; +}; + +&sdhc_2 { + vmmc-supply = <&vreg_l9c_2p95>; + vqmmc-supply = <&vreg_l6c_3p0>; + cd-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; + pinctrl-names = "default", "sleep"; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <59 4>; /* Fingerprint sensor SPI */ + + sdc2_on: sdc2-on-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + + sd-cd-pins { + pins = "gpio69"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_off: sdc2-off-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + + sd-cd-pins { + pins = "gpio69"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; + }; +}; + +&ufs_mem_hc { + vcc-supply = <&vreg_l19a_2p85>; + vcc-max-microamp = <600000>; + vccq2-supply = <&vreg_l12a_1p8>; + vccq2-max-microamp = <600000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l4a_0p9>; + vdda-pll-supply = <&vreg_l3c_1p2>; + + status = "okay"; +}; + +&usb_1 { + qcom,select-utmi-as-pipe-clk; + + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; + maximum-speed = "high-speed"; + + status = "okay"; +}; + +&usb_1_hsphy { + vdd-supply = <&vreg_l4a_0p9>; + vdda-pll-supply = <&vreg_l11a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l17a_3p1>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l4a_0p9>; + vdda-pll-supply = <&vreg_l3c_1p2>; + + status = "okay"; +}; -- 2.55.0
