Describe the dual front-facing IMX355 sensors (standard and wide) and enable the PMI8998 flash LED with hardware-accurate limits.
This brings up the basic camera topology and flash support in DT. Signed-off-by: David Heidelberg <[email protected]> --- Changes in v5: - Added function-enumarator to flash LEDs. (Sashiko) - Dropped l22a regulator needed only for NFOV actuator. (Sashiko) - Dropped vdda-csi[0-2]-supply, as it was unused. (Sashiko). - Added previously omited cam_mclk2_sleep sleep state. - Link to v4: https://lore.kernel.org/r/[email protected] Changes in v4: - Use 24 MHz ext clock for the cameras, as the downstream does, since the upstream driver can now support it. - Added additional LED, as the phone contains two separately controlled white LEDs flash (upper and bottom, in one module). - Increase flash-max-microamp, as I took wrong "flash" from the downstream sources and dropped Dmitry R-b. - Address formatting issues. (Konrad) - Link to v3: https://lore.kernel.org/r/[email protected] Changes in v3: - Dropped cam_vio label. (Dmitry) - Move the MCLK2 pinctrl from cameras to common camss. (Dmitry) - Link to v2: https://lore.kernel.org/r/[email protected] Changes in v2: - leds.h include escaped the initial submission. Fixed. - Link to v1: https://lore.kernel.org/r/[email protected] --- David Heidelberg (2): arm64: dts: qcom: sdm845-google: Add dual front IMX355 cameras arm64: dts: qcom: sdm845-google: Enable PMI8998 camera flash LEDs arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi | 197 ++++++++++++++++++++- 1 file changed, 196 insertions(+), 1 deletion(-) --- base-commit: 0718283ab28bc3907e10b61a6b4be6fefa1cbb2f change-id: 20260315-pixel3-camera-a9989bf589ee Best regards, -- David Heidelberg <[email protected]>
