From: Mohsin Bashir <[email protected]> dup_leaves expects the kernel to reject a group request that lists the same queue twice. When that rejection does not happen, ksft_raises only records a failed check and leaves cm.exception as None, so the following errno check raises AttributeError. Worse, the accepted group request leaves a node shaper and queue 0 behind, which makes later tests fail for an unrelated reason. Handle the negative test explicitly instead. If group fails, verify that the errno is EINVAL and return. If group succeeds, delete the node returned by the operation and queue 0 before reporting the failure.
Give the duplicate leaves different weights so the request still contains two distinct leaf entries while exercising duplicate handle validation. This also introduces _delete_shaper(), cached _cap_get(), and _require_caps() helpers as preparation for the following shaper group tests. The follow-on tests need the same capability checks for node and queue scope support. Keeping that logic in one place avoids repeating raw EOPNOTSUPP handling in each test. Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Mohsin Bashir <[email protected]> --- tools/testing/selftests/drivers/net/shaper.py | 145 +++++++++++------- 1 file changed, 86 insertions(+), 59 deletions(-) diff --git a/tools/testing/selftests/drivers/net/shaper.py b/tools/testing/selftests/drivers/net/shaper.py index c80a4bf8cc05..1954f3263f25 100755 --- a/tools/testing/selftests/drivers/net/shaper.py +++ b/tools/testing/selftests/drivers/net/shaper.py @@ -2,13 +2,52 @@ # SPDX-License-Identifier: GPL-2.0 import errno +import glob from lib.py import ksft_run, ksft_exit -from lib.py import ksft_eq, ksft_raises, ksft_true, KsftSkipEx +from lib.py import ksft_eq, ksft_true, ksft_raises, KsftSkipEx from lib.py import EthtoolFamily, NetshaperFamily from lib.py import NetDrvEnv from lib.py import NlError -from lib.py import cmd +from lib.py import cmd, defer + +def _delete_shaper(cfg, nl_shaper, handle) -> None: + """ Delete the shaper identified by handle, ignoring a missing-shaper error. """ + try: + nl_shaper.delete({'ifindex': cfg.ifindex, + 'handle': handle}) + except NlError as e: + if e.error != errno.ENOENT: + raise + +def _require_queues(cfg, count): + """ Return the netdev TX queue count, skipping the test if fewer than count exist. """ + qcnt = len(glob.glob(f"/sys/class/net/{cfg.ifname}/queues/tx-*")) + if qcnt < count: + raise KsftSkipEx(f"netdev has {qcnt} queues, {count} required") + return qcnt + +def _cap_get(cfg, nl_shaper, scope): + """ Return the shaper capabilities for the given scope, caching them on cfg. """ + if not hasattr(cfg, 'cap_cache'): + cfg.cap_cache = {} + if scope not in cfg.cap_cache: + cfg.cap_cache[scope] = nl_shaper.cap_get({'ifindex': cfg.ifindex, + 'scope': scope}) + + return cfg.cap_cache[scope] + +def _require_caps(cfg, nl_shaper, scope, caps, msg) -> None: + """ Skip the test unless the given scope advertises all the required caps. """ + try: + supported = _cap_get(cfg, nl_shaper, scope) + except NlError as e: + if e.error == errno.EOPNOTSUPP: + raise KsftSkipEx(f"{scope} scope shapers not supported by the device") + raise + + if not set(caps).issubset(supported): + raise KsftSkipEx(msg) def get_shapers(cfg, nl_shaper) -> None: try: @@ -44,17 +83,8 @@ def set_qshapers(cfg, nl_shaper) -> None: if not 'support-bw-max' in caps or not 'support-metric-bps' in caps: raise KsftSkipEx("device does not support queue scope shapers with bw_max and metric bps") - cfg.queues = True; - netnl = EthtoolFamily() - channels = netnl.channels_get({'header': {'dev-index': cfg.ifindex}}) - if channels['combined-count'] == 0: - cfg.rx_type = 'rx' - cfg.nr_queues = channels['rx-count'] - else: - cfg.rx_type = 'combined' - cfg.nr_queues = channels['combined-count'] - if cfg.nr_queues < 3: - raise KsftSkipEx(f"device does not support enough queues min 3 found {cfg.nr_queues}") + _require_queues(cfg, 3) + cfg.queues = True nl_shaper.set({'ifindex': cfg.ifindex, 'handle': {'scope': 'queue', 'id': 1}, @@ -140,8 +170,7 @@ def del_nshapers(cfg, nl_shaper) -> None: def basic_groups(cfg, nl_shaper) -> None: if not cfg.netdev: raise KsftSkipEx("netdev shaper not supported by the device") - if cfg.nr_queues < 3: - raise KsftSkipEx(f"netdev does not have enough queues min 3 reported {cfg.nr_queues}") + _require_queues(cfg, 3) try: caps = nl_shaper.cap_get({'ifindex': cfg.ifindex, @@ -186,28 +215,14 @@ def basic_groups(cfg, nl_shaper) -> None: 'handle': {'scope': 'netdev'}}) def qgroups(cfg, nl_shaper) -> None: - if cfg.nr_queues < 4: - raise KsftSkipEx(f"netdev does not have enough queues min 4 reported {cfg.nr_queues}") - try: - caps = nl_shaper.cap_get({'ifindex': cfg.ifindex, - 'scope':'node'}) - except NlError as e: - if e.error == 95: - raise KsftSkipEx("shapers not supported by the device") - raise - if not 'support-bw-max' in caps or not 'support-metric-bps' in caps: - raise KsftSkipEx("device does not support node scope shapers with bw_max and metric bps") - try: - caps = nl_shaper.cap_get({'ifindex': cfg.ifindex, - 'scope':'queue'}) - except NlError as e: - if e.error == 95: - raise KsftSkipEx("shapers not supported by the device") - raise - if not 'support-nesting' in caps or not 'support-weight' in caps or not 'support-metric-bps' in caps: - raise KsftSkipEx("device does not support nested queue scope shapers with weight") + _require_queues(cfg, 4) + _require_caps(cfg, nl_shaper, 'node', + ['support-bw-max', 'support-metric-bps'], + "device does not support node scope shapers with bw_max and metric bps") + _require_caps(cfg, nl_shaper, 'queue', + ['support-nesting', 'support-weight'], + "device does not support nested queue scope shapers with weight") - cfg.groups = True; node_handle = nl_shaper.group({ 'ifindex': cfg.ifindex, 'leaves':[{'handle': {'scope': 'queue', 'id': 1}, @@ -285,17 +300,12 @@ def qgroups(cfg, nl_shaper) -> None: ksft_eq(len(shapers), 0) def delegation(cfg, nl_shaper) -> None: - if not cfg.groups: - raise KsftSkipEx("device does not support node scope") - try: - caps = nl_shaper.cap_get({'ifindex': cfg.ifindex, - 'scope':'node'}) - except NlError as e: - if e.error == 95: - raise KsftSkipEx("node scope shapers not supported by the device") - raise - if not 'support-nesting' in caps: - raise KsftSkipEx("device does not support node scope shapers nesting") + _require_queues(cfg, 4) + _require_caps(cfg, nl_shaper, 'node', + ['support-bw-max', 'support-metric-bps', 'support-nesting'], + "device does not support node scope shapers with bw_max, metric bps and nesting") + _require_caps(cfg, nl_shaper, 'queue', ['support-nesting', 'support-weight'], + "device does not support nested queue scope shapers with weight") node_handle = nl_shaper.group({ 'ifindex': cfg.ifindex, @@ -376,19 +386,24 @@ def delegation(cfg, nl_shaper) -> None: ksft_eq(len(shapers), 0) def queue_update(cfg, nl_shaper) -> None: - if cfg.nr_queues < 4: - raise KsftSkipEx(f"netdev does not have enough queues min 4 reported {cfg.nr_queues}") + nq = _require_queues(cfg, 4) if not cfg.queues: raise KsftSkipEx("device does not support queue scope") + netnl = EthtoolFamily() + channels = netnl.channels_get({'header': {'dev-index': cfg.ifindex}}) + ch_type = 'combined' if channels['combined-count'] else 'tx' + for i in range(3): nl_shaper.set({'ifindex': cfg.ifindex, 'handle': {'scope': 'queue', 'id': i}, 'metric': 'bps', 'bw-max': (i + 1) * 1000}) + defer(cmd, f"ethtool -L {cfg.dev['ifname']} {ch_type} {nq}") + # Delete a channel, with no shapers configured on top of the related # queue: no changes expected - cmd(f"ethtool -L {cfg.dev['ifname']} {cfg.rx_type} 3") + cmd(f"ethtool -L {cfg.dev['ifname']} {ch_type} 3") shapers = nl_shaper.get({'ifindex': cfg.ifindex}, dump=True) ksft_eq(shapers, [{'ifindex': cfg.ifindex, 'parent': {'scope': 'netdev'}, @@ -408,7 +423,7 @@ def queue_update(cfg, nl_shaper) -> None: # Delete a channel, with a shaper configured on top of the related # queue: the shaper must be deleted, too - cmd(f"ethtool -L {cfg.dev['ifname']} {cfg.rx_type} 2") + cmd(f"ethtool -L {cfg.dev['ifname']} {ch_type} 2") shapers = nl_shaper.get({'ifindex': cfg.ifindex}, dump=True) ksft_eq(shapers, [{'ifindex': cfg.ifindex, @@ -423,7 +438,7 @@ def queue_update(cfg, nl_shaper) -> None: 'bw-max': 2000}]) # Restore the original channels number, no expected changes - cmd(f"ethtool -L {cfg.dev['ifname']} {cfg.rx_type} {cfg.nr_queues}") + cmd(f"ethtool -L {cfg.dev['ifname']} {ch_type} {nq}") shapers = nl_shaper.get({'ifindex': cfg.ifindex}, dump=True) ksft_eq(shapers, [{'ifindex': cfg.ifindex, 'parent': {'scope': 'netdev'}, @@ -443,25 +458,37 @@ def queue_update(cfg, nl_shaper) -> None: def dup_leaves(cfg, nl_shaper) -> None: """ Ensure that the kernel rejects duplicate leaves. """ - if not cfg.groups: - raise KsftSkipEx("device does not support node scope") + _require_caps(cfg, nl_shaper, 'node', ['support-bw-max', 'support-metric-bps'], + "device does not support node scope shapers with bw_max and metric bps") + _require_caps(cfg, nl_shaper, 'queue', ['support-nesting', 'support-weight'], + "device does not support nested queue scope shapers with weight") + node_handle = None with ksft_raises(NlError) as cm: - nl_shaper.group({ + node_handle = nl_shaper.group({ 'ifindex': cfg.ifindex, - 'leaves':[{'handle': {'scope': 'queue', 'id': 0}}, - {'handle': {'scope': 'queue', 'id': 0}}], + 'leaves':[{'handle': {'scope': 'queue', 'id': 0}, + 'weight': 1}, + {'handle': {'scope': 'queue', 'id': 0}, + 'weight': 2}], 'handle': {'scope':'node'}, 'metric': 'bps', 'bw-max': 10000}) + + # Clean up in case the kernel wrongly accepted the request. + if node_handle: + _delete_shaper(cfg, nl_shaper, node_handle['handle']) + _delete_shaper(cfg, nl_shaper, {'scope': 'queue', 'id': 0}) + + # ksft_raises() has already recorded the failure if nothing was raised. + if cm.exception is None: + return ksft_eq(cm.exception.error, errno.EINVAL) def main() -> None: with NetDrvEnv(__file__, queue_count=4) as cfg: cfg.queues = False cfg.netdev = False - cfg.groups = False - cfg.nr_queues = 0 ksft_run([get_shapers, get_caps, set_qshapers, -- 2.53.0-Meta
