Fix typos in comments, reported by scripts/checkpatch.pl using the misspelling list in scripts/spelling.txt. Only touches comments, no code changes.
Assisted-by: Cursor:claude-opus-5 Signed-off-by: Hemanth Selam <[email protected]> --- drivers/net/dsa/bcm_sf2_cfp.c | 2 +- drivers/net/dsa/microchip/ksz_dcb.c | 2 +- drivers/net/dsa/realtek/rtl8366rb.c | 2 +- drivers/net/dsa/sja1105/sja1105_tas.c | 2 +- drivers/net/ethernet/3com/typhoon.h | 2 +- drivers/net/ethernet/8390/ax88796.c | 2 +- drivers/net/ethernet/airoha/airoha_eth.c | 2 +- drivers/net/ethernet/allwinner/sun4i-emac.c | 2 +- drivers/net/ethernet/amazon/ena/ena_eth_com.h | 2 +- drivers/net/ethernet/amd/xgbe/xgbe-dev.c | 2 +- drivers/net/ethernet/apm/xgene/xgene_enet_main.c | 2 +- drivers/net/ethernet/atheros/atl1c/atl1c_hw.h | 2 +- drivers/net/ethernet/atheros/atl1e/atl1e.h | 2 +- drivers/net/ethernet/atheros/atl1e/atl1e_hw.c | 2 +- drivers/net/ethernet/atheros/atl1e/atl1e_main.c | 2 +- drivers/net/ethernet/atheros/atlx/atl1.c | 2 +- drivers/net/ethernet/atheros/atlx/atl2.c | 2 +- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 2 +- drivers/net/ethernet/broadcom/bcm63xx_enet.h | 2 +- drivers/net/ethernet/broadcom/bcmsysport.h | 2 +- drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 2 +- drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c | 4 ++-- drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h | 2 +- drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h | 2 +- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 8 ++++---- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 2 +- drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h | 4 ++-- drivers/net/ethernet/brocade/bna/bfa_ioc.c | 4 ++-- drivers/net/ethernet/brocade/bna/bna_enet.c | 4 ++-- drivers/net/ethernet/calxeda/xgmac.c | 2 +- drivers/net/ethernet/cavium/liquidio/cn66xx_device.c | 2 +- drivers/net/ethernet/cavium/liquidio/lio_core.c | 2 +- drivers/net/ethernet/cavium/liquidio/octeon_config.h | 4 ++-- drivers/net/ethernet/cavium/liquidio/octeon_iq.h | 2 +- drivers/net/ethernet/cavium/liquidio/octeon_main.h | 2 +- drivers/net/ethernet/cavium/liquidio/octeon_nic.h | 2 +- drivers/net/ethernet/cavium/liquidio/request_manager.c | 2 +- drivers/net/ethernet/cavium/thunder/nic.h | 2 +- drivers/net/ethernet/cavium/thunder/nic_main.c | 2 +- drivers/net/ethernet/chelsio/cxgb3/sge.c | 2 +- drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c | 2 +- drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c | 2 +- drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 2 +- drivers/net/ethernet/chelsio/cxgb4vf/sge.c | 2 +- drivers/net/ethernet/cirrus/cs89x0.c | 4 ++-- drivers/net/ethernet/dec/tulip/de2104x.c | 2 +- drivers/net/ethernet/dec/tulip/interrupt.c | 4 ++-- drivers/net/ethernet/dec/tulip/media.c | 2 +- drivers/net/ethernet/dec/tulip/tulip.h | 4 ++-- drivers/net/ethernet/dec/tulip/winbond-840.c | 2 +- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 2 +- drivers/net/ethernet/freescale/fman/fman_memac.c | 2 +- drivers/net/ethernet/freescale/gianfar.c | 2 +- drivers/net/ethernet/freescale/gianfar.h | 2 +- drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c | 2 +- drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c | 2 +- drivers/net/ethernet/hisilicon/hns/hns_enet.c | 4 ++-- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 2 +- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 2 +- .../net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 2 +- drivers/net/ethernet/ibm/emac/emac.h | 2 +- drivers/net/ethernet/ibm/emac/phy.h | 2 +- drivers/net/ethernet/jme.h | 2 +- drivers/net/ethernet/marvell/mvpp2/mvpp2.h | 2 +- drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c | 8 ++++---- drivers/net/ethernet/marvell/octeontx2/af/npc.h | 4 ++-- drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c | 2 +- drivers/net/ethernet/marvell/octeontx2/nic/cn10k.c | 2 +- .../net/ethernet/marvell/octeontx2/nic/otx2_dcbnl.c | 2 +- drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c | 2 +- drivers/net/ethernet/marvell/pxa168_eth.c | 4 ++-- drivers/net/ethernet/mellanox/mlx4/eq.c | 2 +- drivers/net/ethernet/mellanox/mlx5/core/en/tc/sample.c | 2 +- drivers/net/ethernet/mellanox/mlx5/core/lib/tout.c | 2 +- drivers/net/ethernet/mellanox/mlxsw/i2c.c | 2 +- drivers/net/ethernet/mellanox/mlxsw/reg.h | 2 +- drivers/net/ethernet/natsemi/sonic.h | 2 +- drivers/net/ethernet/nvidia/forcedeth.c | 4 ++-- drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c | 2 +- drivers/net/ethernet/qlogic/qed/qed_cxt.c | 2 +- drivers/net/ethernet/qlogic/qed/qed_dev.c | 2 +- drivers/net/ethernet/qlogic/qed/qed_mcp.h | 2 +- drivers/net/ethernet/qlogic/qlcnic/qlcnic.h | 2 +- drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c | 4 ++-- drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c | 2 +- drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 4 ++-- drivers/net/ethernet/qualcomm/emac/emac-mac.c | 2 +- drivers/net/ethernet/realtek/8139too.c | 2 +- drivers/net/ethernet/realtek/rtase/rtase_main.c | 2 +- drivers/net/ethernet/seeq/sgiseeq.c | 2 +- drivers/net/ethernet/sfc/falcon/falcon.c | 2 +- drivers/net/ethernet/sfc/mcdi_pcol.h | 8 ++++---- drivers/net/ethernet/sfc/siena/mcdi_pcol.h | 6 +++--- drivers/net/ethernet/sfc/siena/ptp.c | 2 +- drivers/net/ethernet/sgi/meth.h | 2 +- drivers/net/ethernet/silan/sc92031.c | 6 +++--- drivers/net/ethernet/sis/sis900.c | 2 +- drivers/net/ethernet/smsc/smsc9420.c | 2 +- drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c | 2 +- drivers/net/ethernet/sun/cassini.h | 2 +- drivers/net/ethernet/synopsys/dwc-xlgmac-common.c | 2 +- drivers/net/ethernet/synopsys/dwc-xlgmac-hw.c | 2 +- drivers/net/ethernet/tehuti/tehuti.c | 8 ++++---- drivers/net/ethernet/ti/tlan.c | 2 +- drivers/net/ethernet/toshiba/ps3_gelic_net.c | 2 +- drivers/net/ethernet/toshiba/ps3_gelic_net.h | 2 +- drivers/net/ethernet/toshiba/ps3_gelic_wireless.c | 2 +- drivers/net/ethernet/via/via-rhine.c | 2 +- drivers/net/ethernet/via/via-velocity.c | 10 +++++----- drivers/net/fddi/skfp/cfm.c | 2 +- drivers/net/fddi/skfp/ecm.c | 2 +- drivers/net/fddi/skfp/fplustm.c | 4 ++-- drivers/net/fddi/skfp/h/hwmtm.h | 2 +- drivers/net/fddi/skfp/h/sba.h | 2 +- drivers/net/fddi/skfp/pcmplc.c | 2 +- drivers/net/fddi/skfp/rmt.c | 2 +- drivers/net/ipa/ipa_interrupt.h | 2 +- drivers/net/phy/bcm87xx.c | 2 +- drivers/net/phy/marvell.c | 2 +- drivers/net/ppp/ppp_generic.c | 4 ++-- drivers/net/usb/ax88179_178a.c | 4 ++-- drivers/net/wan/slic_ds26522.c | 2 +- drivers/s390/net/ctcm_main.c | 4 ++-- drivers/s390/net/qeth_core.h | 2 +- include/net/inet_hashtables.h | 2 +- include/net/sock.h | 2 +- net/ipv4/tcp.c | 2 +- net/ipv4/tcp_input.c | 2 +- net/ipv4/tcp_output.c | 2 +- net/ipv6/calipso.c | 4 ++-- net/llc/llc_c_ac.c | 2 +- net/netlink/af_netlink.c | 2 +- net/sctp/protocol.c | 4 ++-- net/sctp/sm_make_chunk.c | 4 ++-- net/sctp/sm_sideeffect.c | 2 +- net/sctp/transport.c | 2 +- net/sctp/ulpqueue.c | 2 +- samples/pktgen/README.rst | 2 +- tools/testing/selftests/drivers/net/team/options.sh | 2 +- .../selftests/net/arp_ndisc_untracked_subnets.sh | 4 ++-- tools/testing/selftests/net/forwarding/lib.sh | 2 +- tools/testing/selftests/net/ip_defrag.c | 2 +- 142 files changed, 184 insertions(+), 184 deletions(-) diff --git a/drivers/net/dsa/bcm_sf2_cfp.c b/drivers/net/dsa/bcm_sf2_cfp.c index 50d3a818eb1b..62258f9cd3f5 100644 --- a/drivers/net/dsa/bcm_sf2_cfp.c +++ b/drivers/net/dsa/bcm_sf2_cfp.c @@ -898,7 +898,7 @@ static int bcm_sf2_cfp_rule_insert(struct dsa_switch *ds, int port, /* * We have a small oddity where Port 6 just does not have a - * valid bit here (so we substract by one). + * valid bit here (so we subtract by one). */ queue_num = ring_cookie % SF2_NUM_EGRESS_QUEUES; if (port_num >= 7) diff --git a/drivers/net/dsa/microchip/ksz_dcb.c b/drivers/net/dsa/microchip/ksz_dcb.c index 7131c5caac54..a0d345382ce7 100644 --- a/drivers/net/dsa/microchip/ksz_dcb.c +++ b/drivers/net/dsa/microchip/ksz_dcb.c @@ -227,7 +227,7 @@ int ksz_port_set_default_prio(struct dsa_switch *ds, int port, u8 prio) * @port: Port number for which to get the priority * @dscp: DSCP value for which to get the priority * - * This function fetches the priority value from switch global DSCP-to-priorty + * This function fetches the priority value from switch global DSCP-to-priority * mapping table for the specified DSCP value. * * Return: The priority value for the DSCP on success, or a negative error diff --git a/drivers/net/dsa/realtek/rtl8366rb.c b/drivers/net/dsa/realtek/rtl8366rb.c index f11831b66de8..4aef48410f9d 100644 --- a/drivers/net/dsa/realtek/rtl8366rb.c +++ b/drivers/net/dsa/realtek/rtl8366rb.c @@ -363,7 +363,7 @@ static int rtl8366rb_get_mib_counter(struct realtek_priv *priv, mib->offset; /* Writing access counter address first - * then ASIC will prepare 64bits counter wait for being retrived + * then ASIC will prepare 64bits counter wait for being retrieved */ ret = regmap_write(priv->map, addr, 0); /* Write whatever */ if (ret) diff --git a/drivers/net/dsa/sja1105/sja1105_tas.c b/drivers/net/dsa/sja1105/sja1105_tas.c index e47967b12d5d..391b30b09290 100644 --- a/drivers/net/dsa/sja1105/sja1105_tas.c +++ b/drivers/net/dsa/sja1105/sja1105_tas.c @@ -377,7 +377,7 @@ int sja1105_init_scheduling(struct sja1105_private *priv) * - Collisions in the future. Events may not collide within one cycle time, * but if two port schedules don't have the same periodicity (aka the cycle * times aren't multiples of one another), they surely will some time in the - * future (actually they will collide an infinite amount of times). + * future (actually they will collide an infinite number of times). */ static bool sja1105_tas_check_conflicts(struct sja1105_private *priv, int port, diff --git a/drivers/net/ethernet/3com/typhoon.h b/drivers/net/ethernet/3com/typhoon.h index 38e6dcab4e94..6e3b44a0e2f9 100644 --- a/drivers/net/ethernet/3com/typhoon.h +++ b/drivers/net/ethernet/3com/typhoon.h @@ -19,7 +19,7 @@ number Y1-LM-2015-01. */ -/* All Typhoon ring positions are specificed in bytes, and point to the +/* All Typhoon ring positions are specified in bytes, and point to the * first "clean" entry in the ring -- ie the next entry we use for whatever * purpose. */ diff --git a/drivers/net/ethernet/8390/ax88796.c b/drivers/net/ethernet/8390/ax88796.c index e1695d0fbd8b..b1d63f404c7b 100644 --- a/drivers/net/ethernet/8390/ax88796.c +++ b/drivers/net/ethernet/8390/ax88796.c @@ -675,7 +675,7 @@ static void ax_initial_setup(struct net_device *dev, struct ei_device *ei_local) * * initialise the specified device, taking care to note the MAC * address it may already have (if configured), ensure - * the device is ready to be used by lib8390.c and registerd with + * the device is ready to be used by lib8390.c and registered with * the network layer. */ static int ax_init_dev(struct net_device *dev) diff --git a/drivers/net/ethernet/airoha/airoha_eth.c b/drivers/net/ethernet/airoha/airoha_eth.c index 64619e9a704d..5bb59d04d869 100644 --- a/drivers/net/ethernet/airoha/airoha_eth.c +++ b/drivers/net/ethernet/airoha/airoha_eth.c @@ -900,7 +900,7 @@ static int airoha_qdma_init_rx(struct airoha_qdma *qdma) int err; if (!(RX_DONE_INT_MASK & BIT(i))) { - /* rx-queue not binded to irq */ + /* rx-queue not bound to irq */ continue; } diff --git a/drivers/net/ethernet/allwinner/sun4i-emac.c b/drivers/net/ethernet/allwinner/sun4i-emac.c index 942454e29488..8f44b7d8c0b3 100644 --- a/drivers/net/ethernet/allwinner/sun4i-emac.c +++ b/drivers/net/ethernet/allwinner/sun4i-emac.c @@ -504,7 +504,7 @@ static void emac_init_device(struct net_device *dev) writel(reg_val | EMAC_CTL_RESET | EMAC_CTL_TX_EN | EMAC_CTL_RX_EN, db->membase + EMAC_CTL_REG); - /* enable RX/TX0/RX Hlevel interrup */ + /* enable RX/TX0/RX Hlevel interrupt */ reg_val = readl(db->membase + EMAC_INT_CTL_REG); reg_val |= (EMAC_INT_CTL_TX_EN | EMAC_INT_CTL_TX_ABRT_EN | EMAC_INT_CTL_RX_EN); writel(reg_val, db->membase + EMAC_INT_CTL_REG); diff --git a/drivers/net/ethernet/amazon/ena/ena_eth_com.h b/drivers/net/ethernet/amazon/ena/ena_eth_com.h index 449bc4960ccc..db192451afff 100644 --- a/drivers/net/ethernet/amazon/ena/ena_eth_com.h +++ b/drivers/net/ethernet/amazon/ena/ena_eth_com.h @@ -93,7 +93,7 @@ static inline bool ena_com_sq_have_enough_space(struct ena_com_io_sq *io_sq, /* This calculation doesn't need to be 100% accurate. So to reduce * the calculation overhead just Subtract 2 lines from the free descs - * (one for the header line and one to compensate the devision + * (one for the header line and one to compensate the division * down calculation. */ temp = required_buffers / io_sq->llq_info.descs_per_entry + 2; diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-dev.c b/drivers/net/ethernet/amd/xgbe/xgbe-dev.c index e2e850c1b90b..ccab0d9f6f21 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-dev.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-dev.c @@ -1482,7 +1482,7 @@ static void xgbe_tx_desc_init(struct xgbe_channel *channel) DBGPR("-->tx_desc_init\n"); - /* Initialze all descriptors */ + /* Initialize all descriptors */ for (i = 0; i < ring->rdesc_count; i++) { rdata = XGBE_GET_DESC_DATA(ring, i); diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c index 507db46daf2b..ec3329045561 100644 --- a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c +++ b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c @@ -1770,7 +1770,7 @@ static int xgene_enet_get_resources(struct xgene_enet_pdata *pdata) if (IS_ERR(pdata->clk)) { if (pdata->phy_mode != PHY_INTERFACE_MODE_SGMII) { /* Abort if the clock is defined but couldn't be - * retrived. Always abort if the clock is missing on + * retrieved. Always abort if the clock is missing on * DT system as the driver can't cope with this case. */ if (PTR_ERR(pdata->clk) != -ENOENT || dev->of_node) diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h index c567c920628f..8f03bb561d44 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h @@ -659,7 +659,7 @@ void atl1c_post_phy_linkchg(struct atl1c_hw *hw, u16 link_speed); /* INT-triggle/SMB Control Register */ #define REG_SMB_STAT_TIMER 0x15C4 /* 2us resolution */ #define SMB_STAT_TIMER_MASK 0xFFFFFF -#define REG_TINT_TPD_THRESH 0x15C8 /* tpd th to trig intrrupt */ +#define REG_TINT_TPD_THRESH 0x15C8 /* tpd th to trig interrupt */ /* Mail box */ #define MB_RFDX_PROD_IDX_MASK 0xFFFF diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e.h b/drivers/net/ethernet/atheros/atl1e/atl1e.h index 9fcad783c939..6b0066f47e9e 100644 --- a/drivers/net/ethernet/atheros/atl1e/atl1e.h +++ b/drivers/net/ethernet/atheros/atl1e/atl1e.h @@ -381,7 +381,7 @@ struct atl1e_rx_page { u8 *addr; /* receive rage virtual address */ dma_addr_t write_offset_dma; /* the DMA address which contain the receive data offset in the page */ - u32 *write_offset_addr; /* the virtaul address which contain + u32 *write_offset_addr; /* the virtual address which contain the receive data offset in the page */ u32 read_offset; /* the offset where we have read */ }; diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e_hw.c b/drivers/net/ethernet/atheros/atl1e/atl1e_hw.c index fa89bc27f62d..25d3e7469058 100644 --- a/drivers/net/ethernet/atheros/atl1e/atl1e_hw.c +++ b/drivers/net/ethernet/atheros/atl1e/atl1e_hw.c @@ -369,7 +369,7 @@ static int atl1e_phy_setup_autoneg_adv(struct atl1e_hw *hw) * * hw - Struct containing variables accessed by shared code * - * Sets bit 15 and 12 of the MII control regiser (for F001 bug) + * Sets bit 15 and 12 of the MII control register (for F001 bug) */ int atl1e_phy_commit(struct atl1e_hw *hw) { diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c index 40290028580b..cc6c262868a5 100644 --- a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c +++ b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c @@ -2117,7 +2117,7 @@ static int atl1e_suspend(struct pci_dev *pdev, pm_message_t state) wol_ctrl_data |= WOL_MAGIC_EN | WOL_MAGIC_PME_EN; if (wufc & AT_WUFC_LNKC) { - /* if orignal link status is link, just wait for retrive link */ + /* if original link status is link, just wait for retrieve link */ if (mii_bmsr_data & BMSR_LSTATUS) { for (i = 0; i < AT_SUSPEND_LINK_TIMEOUT; i++) { msleep(100); diff --git a/drivers/net/ethernet/atheros/atlx/atl1.c b/drivers/net/ethernet/atheros/atlx/atl1.c index 98a4d089270e..179d74e93efd 100644 --- a/drivers/net/ethernet/atheros/atlx/atl1.c +++ b/drivers/net/ethernet/atheros/atlx/atl1.c @@ -628,7 +628,7 @@ static s32 atl1_phy_leave_power_saving(struct atl1_hw *hw) * Resets the PHY and make all config validate * hw - Struct containing variables accessed by shared code * - * Sets bit 15 and 12 of the MII Control regiser (for F001 bug) + * Sets bit 15 and 12 of the MII Control register (for F001 bug) */ static s32 atl1_phy_reset(struct atl1_hw *hw) { diff --git a/drivers/net/ethernet/atheros/atlx/atl2.c b/drivers/net/ethernet/atheros/atlx/atl2.c index 5560d5cc3169..c9aca219ec9c 100644 --- a/drivers/net/ethernet/atheros/atlx/atl2.c +++ b/drivers/net/ethernet/atheros/atlx/atl2.c @@ -2591,7 +2591,7 @@ static s32 atl2_phy_setup_autoneg_adv(struct atl2_hw *hw) * * hw - Struct containing variables accessed by shared code * - * Sets bit 15 and 12 of the MII Control regiser (for F001 bug) + * Sets bit 15 and 12 of the MII Control register (for F001 bug) */ static s32 atl2_phy_commit(struct atl2_hw *hw) { diff --git a/drivers/net/ethernet/broadcom/bcm63xx_enet.c b/drivers/net/ethernet/broadcom/bcm63xx_enet.c index 7ef1babfeca6..f6595fdc888d 100644 --- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c +++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c @@ -1564,7 +1564,7 @@ static int bcm_enet_set_pauseparam(struct net_device *dev, if (priv->has_phy) { if (ecmd->autoneg && (ecmd->rx_pause != ecmd->tx_pause)) { - /* asymetric pause mode not supported, + /* asymmetric pause mode not supported, * actually possible but integrated PHY has RO * asym_pause bit */ return -EINVAL; diff --git a/drivers/net/ethernet/broadcom/bcm63xx_enet.h b/drivers/net/ethernet/broadcom/bcm63xx_enet.h index 78f1830fb3cb..ba8f42cf5fb2 100644 --- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h +++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h @@ -265,7 +265,7 @@ struct bcm_enet_priv { /* number of available descriptor for tx */ int tx_desc_count; - /* next tx descriptor avaiable */ + /* next tx descriptor available */ int tx_curr_desc; /* next dirty tx descriptor to reclaim */ diff --git a/drivers/net/ethernet/broadcom/bcmsysport.h b/drivers/net/ethernet/broadcom/bcmsysport.h index a34296f989f1..6f807e96dbd8 100644 --- a/drivers/net/ethernet/broadcom/bcmsysport.h +++ b/drivers/net/ethernet/broadcom/bcmsysport.h @@ -402,7 +402,7 @@ struct bcm_rsb { #define TDMA_DESC_RING_BASE(i) (TDMA_DESC_RING_00_BASE + \ ((i) * TDMA_DESC_RING_SIZE)) -/* Ring indexed register addreses */ +/* Ring indexed register addresses */ #define TDMA_DESC_RING_HEAD_TAIL_PTR(i) (TDMA_DESC_RING_BASE(i) + \ RING_HEAD_TAIL_PTR) #define TDMA_DESC_RING_COUNT(i) (TDMA_DESC_RING_BASE(i) + \ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 9580ab83d387..a2050083048b 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -666,7 +666,7 @@ struct bnx2x_fastpath { MAX_TX_DESC_CNT * NEXT_PAGE_TX_DESC_CNT) /* max BDs per tx packet w/o next_pages: * START_BD - describes packed - * START_BD(splitted) - includes unpaged data segment for GSO + * START_BD(split) - includes unpaged data segment for GSO * PARSING_BD - for TSO and CSUM data * PARSING_BD2 - for encapsulation data * Frag BDs - describes pages for frags diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c index 9af81630c8a4..3df8a5988521 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c @@ -1986,7 +1986,7 @@ static void bnx2x_dcbnl_set_pg_tccfg_tx(struct net_device *netdev, int prio, return; /** - * bw_pct ignored - band-width percentage devision between user + * bw_pct ignored - band-width percentage division between user * priorities within the same group is not * standard and hence not supported * @@ -2038,7 +2038,7 @@ static void bnx2x_dcbnl_get_pg_tccfg_tx(struct net_device *netdev, int prio, DP(BNX2X_MSG_DCB, "prio = %d\n", prio); /** - * bw_pct ignored - band-width percentage devision between user + * bw_pct ignored - band-width percentage division between user * priorities within the same group is not * standard and hence not supported * diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h index 611efee75834..5297ab578a6f 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h @@ -2342,7 +2342,7 @@ struct shmem2_region { u32 oem_i2c_data_addr; }; - /* 9 entires for the C2S PCP map for each inner VLAN PCP + 1 default */ + /* 9 entries for the C2S PCP map for each inner VLAN PCP + 1 default */ /* For PCP values 0-3 use the map lower */ /* 0xFF000000 - PCP 0, 0x00FF0000 - PCP 1, * 0x0000FF00 - PCP 2, 0x000000FF PCP 3 diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h index fc7fce642666..b5004aab124d 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h @@ -582,7 +582,7 @@ static void bnx2x_init_pxp_arb(struct bnx2x *bp, int r_order, REG_WR(bp, PXP2_REG_WR_CDU_MPS, val); } - /* Validate number of tags suppoted by device */ + /* Validate number of tags supported by device */ #define PCIE_REG_PCIER_TL_HDR_FC_ST 0x2980 val = REG_RD(bp, PCIE_REG_PCIER_TL_HDR_FC_ST); val &= 0xFF; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index ea310057fe3a..84d002b31920 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -2536,7 +2536,7 @@ static int bnx2x_pbf_update(struct link_params *params, u32 flow_ctrl, } /** - * bnx2x_get_emac_base - retrive emac base address + * bnx2x_get_emac_base - retrieve emac base address * * @bp: driver handle * @mdc_mdio_access: access type @@ -3593,7 +3593,7 @@ static u8 bnx2x_ext_phy_resolve_fc(struct bnx2x_phy *phy, u8 ret = 0; vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; if (phy->req_flow_ctrl != BNX2X_FLOW_CTRL_AUTO) { - /* Update the advertised flow-controled of LD/LP in AN */ + /* Update the advertised flow-controlled of LD/LP in AN */ if (phy->req_line_speed == SPEED_AUTO_NEG) bnx2x_ext_phy_update_adv_fc(phy, params, vars); /* But set the flow-control result as the requested one */ @@ -3743,7 +3743,7 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, {MDIO_WC_DEVAD, MDIO_WC_REG_CL72_USERB0_CL72_TX_FIR_TAP, 0}, }; DP(NETIF_MSG_LINK, "Enable Auto Negotiation for KR\n"); - /* Set to default registers that may be overriden by 10G force */ + /* Set to default registers that may be overridden by 10G force */ for (i = 0; i < ARRAY_SIZE(reg_set); i++) bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg, reg_set[i].val); @@ -5425,7 +5425,7 @@ static void bnx2x_flow_ctrl_resolve(struct bnx2x_phy *phy, /* Resolve from gp_status in case of AN complete and not sgmii */ if (phy->req_flow_ctrl != BNX2X_FLOW_CTRL_AUTO) { - /* Update the advertised flow-controled of LD/LP in AN */ + /* Update the advertised flow-controlled of LD/LP in AN */ if (phy->req_line_speed == SPEED_AUTO_NEG) bnx2x_update_adv_fc(phy, params, vars, gp_status); /* But set the flow-control result as the requested one */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 39eb6ab5f805..277c7bd9c6e7 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -12669,7 +12669,7 @@ static int bnx2x_set_mc_list(struct bnx2x *bp) if (rc) return rc; - /* Override the curently configured set of mc filters */ + /* Override the currently configured set of mc filters */ rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_SET); if (rc < 0) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h index a018f251d198..30943f347164 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h @@ -2236,7 +2236,7 @@ extern const u32 dmae_reg_go_c[]; /* [RW 1] Output enable for TX PAUSE signal to the MAC. */ #define NIG_REG_P0_MAC_PAUSE_OUT_EN 0x185b4 /* [RW 32] Eight 4-bit configurations for specifying which COS (0-15 for - * future expansion) each priorty is to be mapped to. Bits 3:0 specify the + * future expansion) each priority is to be mapped to. Bits 3:0 specify the * COS for priority 0. Bits 31:28 specify the COS for priority 7. The 3-bit * priority field is extracted from the outer-most VLAN in receive packet. * Only COS 0 and COS 1 are supported in E2. */ @@ -2434,7 +2434,7 @@ extern const u32 dmae_reg_go_c[]; /* [RW 1] Output enable for TX PAUSE signal to the MAC. */ #define NIG_REG_P1_MAC_PAUSE_OUT_EN 0x185c8 /* [RW 32] Eight 4-bit configurations for specifying which COS (0-15 for - * future expansion) each priorty is to be mapped to. Bits 3:0 specify the + * future expansion) each priority is to be mapped to. Bits 3:0 specify the * COS for priority 0. Bits 31:28 specify the COS for priority 7. The 3-bit * priority field is extracted from the outer-most VLAN in receive packet. * Only COS 0 and COS 1 are supported in E2. */ diff --git a/drivers/net/ethernet/brocade/bna/bfa_ioc.c b/drivers/net/ethernet/brocade/bna/bfa_ioc.c index 92c7639d1fc7..07ca97b56b3e 100644 --- a/drivers/net/ethernet/brocade/bna/bfa_ioc.c +++ b/drivers/net/ethernet/brocade/bna/bfa_ioc.c @@ -1605,7 +1605,7 @@ bfa_flash_read_start(void __iomem *pci_bar, u32 offset, u32 len, { int status; - /* len must be mutiple of 4 and not exceeding fifo size */ + /* len must be multiple of 4 and not exceeding fifo size */ if (len == 0 || len > BFA_FLASH_FIFO_SIZE || (len & 0x03) != 0) return BFA_FLASH_ERR_LEN; @@ -3023,7 +3023,7 @@ bfa_ioc_poll_fwinit(struct bfa_ioc *ioc) /* * FLASH DMA buffer should be big enough to hold both MFG block and * asic block(64k) at the same time and also should be 2k aligned to - * avoid write segement to cross sector boundary. + * avoid write segment to cross sector boundary. */ #define BFA_FLASH_SEG_SZ 2048 #define BFA_FLASH_DMA_BUF_SZ \ diff --git a/drivers/net/ethernet/brocade/bna/bna_enet.c b/drivers/net/ethernet/brocade/bna/bna_enet.c index 883de0ac8de4..6c787c93c8f6 100644 --- a/drivers/net/ethernet/brocade/bna/bna_enet.c +++ b/drivers/net/ethernet/brocade/bna/bna_enet.c @@ -1877,13 +1877,13 @@ bna_res_req(struct bna_res_info *res_info) res_info[BNA_RES_MEM_T_ATTR].res_u.mem_info.len = ALIGN(bfa_nw_ioc_meminfo(), PAGE_SIZE); - /* Virtual memory for retreiving fw_trc */ + /* Virtual memory for retrieving fw_trc */ res_info[BNA_RES_MEM_T_FWTRC].res_type = BNA_RES_T_MEM; res_info[BNA_RES_MEM_T_FWTRC].res_u.mem_info.mem_type = BNA_MEM_T_KVA; res_info[BNA_RES_MEM_T_FWTRC].res_u.mem_info.num = 1; res_info[BNA_RES_MEM_T_FWTRC].res_u.mem_info.len = BNA_DBG_FWTRC_LEN; - /* DMA memory for retreiving stats */ + /* DMA memory for retrieving stats */ res_info[BNA_RES_MEM_T_STATS].res_type = BNA_RES_T_MEM; res_info[BNA_RES_MEM_T_STATS].res_u.mem_info.mem_type = BNA_MEM_T_DMA; res_info[BNA_RES_MEM_T_STATS].res_u.mem_info.num = 1; diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c index a2410fba6be2..4792d5c290ae 100644 --- a/drivers/net/ethernet/calxeda/xgmac.c +++ b/drivers/net/ethernet/calxeda/xgmac.c @@ -1117,7 +1117,7 @@ static netdev_tx_t xgmac_xmit(struct sk_buff *skb, struct net_device *dev) desc_set_tx_owner(desc, desc_flags); } - /* Interrupt on completition only for the latest segment */ + /* Interrupt on completion only for the latest segment */ if (desc != first) desc_set_tx_owner(desc, desc_flags | TXDESC_LAST_SEG | irq_flag); diff --git a/drivers/net/ethernet/cavium/liquidio/cn66xx_device.c b/drivers/net/ethernet/cavium/liquidio/cn66xx_device.c index 93fccfec288d..d3ebbb40579e 100644 --- a/drivers/net/ethernet/cavium/liquidio/cn66xx_device.c +++ b/drivers/net/ethernet/cavium/liquidio/cn66xx_device.c @@ -177,7 +177,7 @@ static void lio_cn66xx_setup_pkt_ctl_regs(struct octeon_device *oct) /* 66XX SPECIFIC */ if (CFG_GET_OQ_MAX_Q(cn6xxx->conf) <= 4) - /* Disable RING_EN if only upto 4 rings are used. */ + /* Disable RING_EN if only up to 4 rings are used. */ pktctl &= ~(1 << 4); else pktctl |= (1 << 4); diff --git a/drivers/net/ethernet/cavium/liquidio/lio_core.c b/drivers/net/ethernet/cavium/liquidio/lio_core.c index 93b06d599eed..bed450bfad38 100644 --- a/drivers/net/ethernet/cavium/liquidio/lio_core.c +++ b/drivers/net/ethernet/cavium/liquidio/lio_core.c @@ -565,7 +565,7 @@ static int octeon_setup_droq(struct octeon_device *oct, int q_no, int num_descs, } /** - * liquidio_push_packet - Routine to push packets arriving on Octeon interface upto network layer. + * liquidio_push_packet - Routine to push packets arriving on Octeon interface up to network layer. * @octeon_id:octeon device id. * @skbuff: skbuff struct to be passed to network layer. * @len: size of total data received. diff --git a/drivers/net/ethernet/cavium/liquidio/octeon_config.h b/drivers/net/ethernet/cavium/liquidio/octeon_config.h index 24c212001212..d2d64edaf3bf 100644 --- a/drivers/net/ethernet/cavium/liquidio/octeon_config.h +++ b/drivers/net/ethernet/cavium/liquidio/octeon_config.h @@ -254,7 +254,7 @@ struct octeon_oq_config { u64 pkts_per_intr:16; /** Interrupt Coalescing (Time Interval). Octeon will interrupt the - * host if atleast one packet was sent in the time interval specified + * host if at least one packet was sent in the time interval specified * by this field. The driver uses time interval interrupt coalescing * by default. The time is specified in microseconds. */ @@ -296,7 +296,7 @@ struct octeon_oq_config { u64 oq_intr_pkt:16; /** Interrupt Coalescing (Time Interval). Octeon will interrupt the - * host if atleast one packet was sent in the time interval specified + * host if at least one packet was sent in the time interval specified * by this field. The driver uses time interval interrupt coalescing * by default. The time is specified in microseconds. */ diff --git a/drivers/net/ethernet/cavium/liquidio/octeon_iq.h b/drivers/net/ethernet/cavium/liquidio/octeon_iq.h index a04f36a0e1a0..fdd7d3a77a2d 100644 --- a/drivers/net/ethernet/cavium/liquidio/octeon_iq.h +++ b/drivers/net/ethernet/cavium/liquidio/octeon_iq.h @@ -70,7 +70,7 @@ struct oct_iq_stats { /** The instruction (input) queue. * The input queue is used to post raw (instruction) mode data or packet - * data to Octeon device from the host. Each input queue (upto 4) for + * data to Octeon device from the host. Each input queue (up to 4) for * a Octeon device has one such structure to represent it. */ struct octeon_instr_queue { diff --git a/drivers/net/ethernet/cavium/liquidio/octeon_main.h b/drivers/net/ethernet/cavium/liquidio/octeon_main.h index 953edf0c7096..d2a52673cac5 100644 --- a/drivers/net/ethernet/cavium/liquidio/octeon_main.h +++ b/drivers/net/ethernet/cavium/liquidio/octeon_main.h @@ -166,7 +166,7 @@ static inline int octeon_map_pci_barx(struct octeon_device *oct, * errno -EINTR: user abort the command. * errno -ETIME: user spefified timeout value has been expired. * errno -EBUSY: the response of the request does not return in - * resonable time (LIO_SC_MAX_TMO_MS). + * reasonable time (LIO_SC_MAX_TMO_MS). * the sc wll be move to zombie response list by * lio_process_ordered_list() * diff --git a/drivers/net/ethernet/cavium/liquidio/octeon_nic.h b/drivers/net/ethernet/cavium/liquidio/octeon_nic.h index c139fc423764..8341faaa0c24 100644 --- a/drivers/net/ethernet/cavium/liquidio/octeon_nic.h +++ b/drivers/net/ethernet/cavium/liquidio/octeon_nic.h @@ -277,7 +277,7 @@ int octnet_send_nic_data_pkt(struct octeon_device *oct, /** Send a NIC control packet to the device * @param oct - octeon device pointer - * @param nctrl - control structure with command, timout, and callback info + * @param nctrl - control structure with command, timeout, and callback info * @returns IQ_FAILED if it failed to add to the input queue. IQ_STOP if the * queue should be stopped, and IQ_SEND_OK if it sent okay. */ diff --git a/drivers/net/ethernet/cavium/liquidio/request_manager.c b/drivers/net/ethernet/cavium/liquidio/request_manager.c index d7cfb20eea00..a983e7f79461 100644 --- a/drivers/net/ethernet/cavium/liquidio/request_manager.c +++ b/drivers/net/ethernet/cavium/liquidio/request_manager.c @@ -40,7 +40,7 @@ static void __check_db_timeout(struct octeon_device *oct, u64 iq_no); static void (*reqtype_free_fn[MAX_OCTEON_DEVICES][REQTYPE_LAST + 1]) (void *); -/* Define this to return the request status comaptible to old code */ +/* Define this to return the request status compatible to old code */ /*#define OCTEON_USE_OLD_REQ_STATUS*/ /* Return 0 on success, 1 on failure */ diff --git a/drivers/net/ethernet/cavium/thunder/nic.h b/drivers/net/ethernet/cavium/thunder/nic.h index 090d6b83982a..bb3f4fa6b995 100644 --- a/drivers/net/ethernet/cavium/thunder/nic.h +++ b/drivers/net/ethernet/cavium/thunder/nic.h @@ -97,7 +97,7 @@ * This value ensures that once a packet has been "accepted" * for reception it will not get dropped due to non-availability * of CQ descriptor. An errata in HW mandates this value to be - * atleast 0x100. + * at least 0x100. */ #define NICPF_CQM_MIN_DROP_LEVEL 0x100 diff --git a/drivers/net/ethernet/cavium/thunder/nic_main.c b/drivers/net/ethernet/cavium/thunder/nic_main.c index 0ec65ec634df..086f32b61580 100644 --- a/drivers/net/ethernet/cavium/thunder/nic_main.c +++ b/drivers/net/ethernet/cavium/thunder/nic_main.c @@ -595,7 +595,7 @@ static void nic_config_rss(struct nicpf *nic, struct rss_cfg_msg *cfg) nic_reg_write(nic, idx_addr | (cpi_base << 3), cpi_cfg); } -/* 4 level transmit side scheduler configutation +/* 4 level transmit side scheduler configuration * for TNS bypass mode * * Sample configuration for SQ0 on 88xx diff --git a/drivers/net/ethernet/chelsio/cxgb3/sge.c b/drivers/net/ethernet/chelsio/cxgb3/sge.c index b59735d0e065..238e85bf3b4f 100644 --- a/drivers/net/ethernet/chelsio/cxgb3/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb3/sge.c @@ -3273,7 +3273,7 @@ void t3_sge_stop_dma(struct adapter *adap) } /** - * t3_sge_stop - disable SGE operation completly + * t3_sge_stop - disable SGE operation completely * @adap: the adapter * * Called from process context. Disables the DMA engine and any diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c index 7d5204834ee2..a4903e149e5f 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c @@ -50,7 +50,7 @@ void cxgb4_dcb_version_init(struct net_device *dev) struct port_info *pi = netdev2pinfo(dev); struct port_dcb_info *dcb = &pi->dcb; - /* Any writes here are only done on kernels that exlicitly need + /* Any writes here are only done on kernels that explicitly need * a specific version, say < 2.6.38 which only support CEE */ dcb->dcb_version = FW_PORT_DCB_VER_AUTO; diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c index 0092bc16f887..c58cb4078b97 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c @@ -1614,7 +1614,7 @@ static int set_rss_table(struct net_device *dev, if (!rxfh->indir) return 0; - /* Interface must be brought up atleast once */ + /* Interface must be brought up at least once */ if (pi->adapter->flags & CXGB4_FULL_INIT_DONE) { for (i = 0; i < pi->rss_size; i++) pi->rss[i] = rxfh->indir[i]; diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c index 29d7b786e51e..f4b14bbbe512 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -9825,7 +9825,7 @@ int t4_read_cim_obq(struct adapter *adap, unsigned int qid, u32 *data, size_t n) QUENUMSELECT_V(qid)); v = t4_read_reg(adap, CIM_QUEUE_CONFIG_CTRL_A); - addr = CIMQBASE_G(v) * 64; /* muliple of 256 -> muliple of 4 */ + addr = CIMQBASE_G(v) * 64; /* multiple of 256 -> multiple of 4 */ nwords = CIMQSIZE_G(v) * 64; /* same */ if (n > nwords) n = nwords; diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/sge.c b/drivers/net/ethernet/chelsio/cxgb4vf/sge.c index 31fab2415743..b4374ca1d653 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb4vf/sge.c @@ -2194,7 +2194,7 @@ static void __iomem *bar2_address(struct adapter *adapter, * @rspq: pointer to the new rxq's Response Queue to be filled in * @iqasynch: if 0, a normal rspq; if 1, an asynchronous event queue * @dev: the network device associated with the new rspq - * @intr_dest: MSI-X vector index (overriden in MSI mode) + * @intr_dest: MSI-X vector index (overridden in MSI mode) * @fl: pointer to the new rxq's Free List to be filled in * @hnd: the interrupt handler to invoke for the rspq */ diff --git a/drivers/net/ethernet/cirrus/cs89x0.c b/drivers/net/ethernet/cirrus/cs89x0.c index fc8b1cb950a1..98c43315eb97 100644 --- a/drivers/net/ethernet/cirrus/cs89x0.c +++ b/drivers/net/ethernet/cirrus/cs89x0.c @@ -257,9 +257,9 @@ control_dc_dc(struct net_device *dev, int on_not_off) struct net_local *lp = netdev_priv(dev); unsigned int selfcontrol; unsigned long timenow = jiffies; - /* control the DC to DC convertor in the SelfControl register. + /* control the DC to DC converter in the SelfControl register. * Note: This is hooked up to a general purpose pin, might not - * always be a DC to DC convertor. + * always be a DC to DC converter. */ selfcontrol = HCB1_ENBL; /* Enable the HCB1 bit as an output */ diff --git a/drivers/net/ethernet/dec/tulip/de2104x.c b/drivers/net/ethernet/dec/tulip/de2104x.c index f38a10c79907..fa52e099409c 100644 --- a/drivers/net/ethernet/dec/tulip/de2104x.c +++ b/drivers/net/ethernet/dec/tulip/de2104x.c @@ -373,7 +373,7 @@ static void de_rx_err_acct (struct de_private *de, unsigned rx_tail, rx_tail, status, len); if ((status & 0x38000300) != 0x0300) { - /* Ingore earlier buffers. */ + /* Ignore earlier buffers. */ if ((status & 0xffff) != 0x7fff) { netif_warn(de, rx_err, de->dev, "Oversized Ethernet frame spanned multiple buffers, status %08x!\n", diff --git a/drivers/net/ethernet/dec/tulip/interrupt.c b/drivers/net/ethernet/dec/tulip/interrupt.c index 0a12cb9b3ba7..8c02771b28e4 100644 --- a/drivers/net/ethernet/dec/tulip/interrupt.c +++ b/drivers/net/ethernet/dec/tulip/interrupt.c @@ -177,7 +177,7 @@ int tulip_poll(struct napi_struct *napi, int budget) pkt_len > 1518) { if ((status & (RxLengthOver2047 | RxWholePkt)) != RxWholePkt) { - /* Ingore earlier buffers. */ + /* Ignore earlier buffers. */ if ((status & 0xffff) != 0x7fff) { if (tulip_debug > 1) dev_warn(&dev->dev, @@ -408,7 +408,7 @@ static int tulip_rx(struct net_device *dev) pkt_len > 1518) { if ((status & (RxLengthOver2047 | RxWholePkt)) != RxWholePkt) { - /* Ingore earlier buffers. */ + /* Ignore earlier buffers. */ if ((status & 0xffff) != 0x7fff) { if (tulip_debug > 1) netdev_warn(dev, diff --git a/drivers/net/ethernet/dec/tulip/media.c b/drivers/net/ethernet/dec/tulip/media.c index 55d6fc99f40b..0c9694d2b38a 100644 --- a/drivers/net/ethernet/dec/tulip/media.c +++ b/drivers/net/ethernet/dec/tulip/media.c @@ -24,7 +24,7 @@ /* Read and write the MII registers using software-generated serial MDIO protocol. It is just different enough from the EEPROM protocol - to not share code. The maxium data clock rate is 2.5 Mhz. */ + to not share code. The maximum data clock rate is 2.5 Mhz. */ #define MDIO_SHIFT_CLK 0x10000 #define MDIO_DATA_WRITE0 0x00000 #define MDIO_DATA_WRITE1 0x20000 diff --git a/drivers/net/ethernet/dec/tulip/tulip.h b/drivers/net/ethernet/dec/tulip/tulip.h index 5e010e1fa6f7..e39e5c78d4cc 100644 --- a/drivers/net/ethernet/dec/tulip/tulip.h +++ b/drivers/net/ethernet/dec/tulip/tulip.h @@ -250,7 +250,7 @@ enum t21143_csr6_bits { csr6_ttm = (1<<22), /* Transmit Threshold Mode, set for 10baseT, 0 for 100BaseTX */ csr6_sf = (1<<21), /* Store and forward. If set ignores TR bits */ csr6_hbd = (1<<19), /* Heart beat disable. Disables SQE function in 10baseT */ - csr6_ps = (1<<18), /* Port Select. 0 (defualt) = 10baseT, 1 = 100baseTX: can't be set */ + csr6_ps = (1<<18), /* Port Select. 0 (default) = 10baseT, 1 = 100baseTX: can't be set */ csr6_ca = (1<<17), /* Collision Offset Enable. If set uses special algorithm in low collision situations */ csr6_trh = (1<<15), /* Transmit Threshold high bit */ csr6_trl = (1<<14), /* Transmit Threshold low bit */ @@ -274,7 +274,7 @@ enum t21143_csr6_bits { csr6_om_int_loop = (1<<10), /* internal (FIFO) loopback flag */ csr6_om_ext_loop = (1<<11), /* external (PMD) loopback flag */ /* set both and you get (PHY) loopback */ - csr6_fd = (1<<9), /* Full duplex mode, disables hearbeat, no loopback */ + csr6_fd = (1<<9), /* Full duplex mode, disables heartbeat, no loopback */ csr6_pm = (1<<7), /* Pass All Multicast */ csr6_pr = (1<<6), /* Promiscuous mode */ csr6_sb = (1<<5), /* Start(1)/Stop(0) backoff counter */ diff --git a/drivers/net/ethernet/dec/tulip/winbond-840.c b/drivers/net/ethernet/dec/tulip/winbond-840.c index a5581f1d0141..be9199f55a8a 100644 --- a/drivers/net/ethernet/dec/tulip/winbond-840.c +++ b/drivers/net/ethernet/dec/tulip/winbond-840.c @@ -1188,7 +1188,7 @@ static int netdev_rx(struct net_device *dev) break; if ((status & 0x38008300) != 0x0300) { if ((status & 0x38000300) != 0x0300) { - /* Ingore earlier buffers. */ + /* Ignore earlier buffers. */ if ((status & 0xffff) != 0x7fff) { dev_warn(&dev->dev, "Oversized Ethernet frame spanned multiple buffers, entry %#x status %04x!\n", diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c index 6f1046c9cc51..27b405e93c64 100644 --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c @@ -1820,7 +1820,7 @@ static void dpaa2_eth_seed_pools(struct dpaa2_eth_priv *priv) /* * Drain the specified number of buffers from one of the DPNI's private buffer * pools. - * @count must not exceeed DPAA2_ETH_BUFS_PER_CMD + * @count must not exceed DPAA2_ETH_BUFS_PER_CMD */ static void dpaa2_eth_drain_bufs(struct dpaa2_eth_priv *priv, int bpid, int count) diff --git a/drivers/net/ethernet/freescale/fman/fman_memac.c b/drivers/net/ethernet/freescale/fman/fman_memac.c index e2d8c58deef0..c1d588337751 100644 --- a/drivers/net/ethernet/freescale/fman/fman_memac.c +++ b/drivers/net/ethernet/freescale/fman/fman_memac.c @@ -1311,7 +1311,7 @@ int memac_initialization(struct mac_device *mac_dev, /* Most boards should use MLO_AN_INBAND, but existing boards don't have * a managed property. Default to MLO_AN_INBAND rather than MLO_AN_PHY. - * Phylink will allow this to be overriden by a fixed link. We need to + * Phylink will allow this to be overridden by a fixed link. We need to * be careful and not enable this if we are using MII or RGMII, since * those configurations modes don't use in-band autonegotiation. */ diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index cf636fc5aafa..332881c9daed 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -1041,7 +1041,7 @@ static void gfar_halt(struct gfar_private *priv) struct gfar __iomem *regs = priv->gfargrp[0].regs; u32 tempval; - /* Dissable the Rx/Tx hw queues */ + /* Disable the Rx/Tx hw queues */ gfar_write(®s->rqueue, 0); gfar_write(®s->tqueue, 0); diff --git a/drivers/net/ethernet/freescale/gianfar.h b/drivers/net/ethernet/freescale/gianfar.h index 68b59d3202e3..9ad4d426ed1c 100644 --- a/drivers/net/ethernet/freescale/gianfar.h +++ b/drivers/net/ethernet/freescale/gianfar.h @@ -1176,7 +1176,7 @@ struct gfar_private { extended_hash:1, bd_stash_en:1, rx_filer_enable:1, - /* Enable priorty based Tx scheduling in Hw */ + /* Enable priority based Tx scheduling in Hw */ prio_sched_en:1, /* Flow control flags */ pause_aneg_en:1, diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c index 91391a49fcea..a59fd280a045 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c @@ -591,7 +591,7 @@ static int hns_mac_config_sds_loopback(struct hns_mac_cb *mac_cb, bool en) #define HILINK_ACCESS_SEL_CFG 0x40008 /* hilink4 & hilink3 use the same xge training and * xge u adaptor. There is a hilink access sel cfg - * register to select which one to be configed + * register to select which one to be configured */ if ((!HNS_DSAF_IS_DEBUG(mac_cb->dsaf_dev)) && (mac_cb->mac_id <= 3)) diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c index 5013beb4d282..408d36d85fb1 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c @@ -139,7 +139,7 @@ static void hns_ppe_set_vlan_strip(struct hns_ppe_cb *ppe_cb, int en) } /** - * hns_ppe_checksum_hw - set ppe checksum caculate + * hns_ppe_checksum_hw - set ppe checksum calculate * @ppe_cb: ppe device * @value: value */ diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.c b/drivers/net/ethernet/hisilicon/hns/hns_enet.c index e905f10b894e..d819d2bb3450 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c @@ -1230,7 +1230,7 @@ static void hns_nic_update_stats(struct net_device *netdev) h->dev->ops->update_stats(h, &netdev->stats); } -/* set mac addr if it is configed. or leave it to the AE driver */ +/* set mac addr if it is configured. or leave it to the AE driver */ static void hns_init_mac_addr(struct net_device *ndev) { struct hns_nic_priv *priv = netdev_priv(ndev); @@ -2317,7 +2317,7 @@ static int hns_nic_dev_probe(struct platform_device *pdev) ret = device_property_read_u32(dev, "port-id", &port_id); if (ret) goto out_read_prop_fail; - /* for old dts, we need to caculate the port offset */ + /* for old dts, we need to calculate the port offset */ port_id = port_id < HNS_SRV_OFFSET ? port_id + HNS_DEBUG_OFFSET : port_id - HNS_SRV_OFFSET; } diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index e6af939c1c19..bf35f55f5b8f 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -10527,7 +10527,7 @@ static int hclge_get_link_diagnosis_info(struct hnae3_handle *handle, } /* After disable sriov, VF still has some config and info need clean, - * which configed by PF. + * which configured by PF. */ static void hclge_clear_vport_vf_info(struct hclge_vport *vport, int vfid) { diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c index 00c3f2548bf6..bf533b8f46ae 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c @@ -35,7 +35,7 @@ enum hclge_shaper_level { * IR(Mbps) = ------------------------- * CLOCK(1000Mbps) * Tick * (2 ^ IR_s) * - * @return: 0: calculate sucessful, negative: fail + * @return: 0: calculate successful, negative: fail */ static int hclge_shaper_para_calc(u32 ir, u8 shaper_level, struct hclge_shaper_ir_para *ir_para, diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c index 063a692c2b41..5d14d29b0296 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c @@ -1880,7 +1880,7 @@ static void hclgevf_reset_service_task(struct hclgevf_dev *hdev) * from PF as cmdq would be in unreliable state i.e. mailbox * communication between PF and VF would be broken. * - * if we are never geting into pending state it means either: + * if we are never getting into pending state it means either: * 1. PF is not receiving our request which could be due to IMP * reset * 2. PF is screwed diff --git a/drivers/net/ethernet/ibm/emac/emac.h b/drivers/net/ethernet/ibm/emac/emac.h index 09d3ac374b2d..38b9b623fa7a 100644 --- a/drivers/net/ethernet/ibm/emac/emac.h +++ b/drivers/net/ethernet/ibm/emac/emac.h @@ -2,7 +2,7 @@ /* * drivers/net/ethernet/ibm/emac/emac.h * - * Register definitions for PowerPC 4xx on-chip ethernet contoller + * Register definitions for PowerPC 4xx on-chip ethernet controller * * Copyright 2007 Benjamin Herrenschmidt, IBM Corp. * <[email protected]> diff --git a/drivers/net/ethernet/ibm/emac/phy.h b/drivers/net/ethernet/ibm/emac/phy.h index 2184e8373ee5..497639202bd3 100644 --- a/drivers/net/ethernet/ibm/emac/phy.h +++ b/drivers/net/ethernet/ibm/emac/phy.h @@ -50,7 +50,7 @@ struct mii_phy { struct mii_phy_def *def; u32 advertising; /* Ethtool ADVERTISED_* defines */ u32 features; /* Copied from mii_phy_def.features - or determined automaticaly */ + or determined automatically */ int address; /* PHY address */ int mode; /* PHY mode */ int gpcs_address; /* GPCS PHY address */ diff --git a/drivers/net/ethernet/jme.h b/drivers/net/ethernet/jme.h index 860494ff3714..3773b699d2e1 100644 --- a/drivers/net/ethernet/jme.h +++ b/drivers/net/ethernet/jme.h @@ -660,7 +660,7 @@ enum jme_rxcs_bit_masks { RXCS_WAKEUP = 0x00000040, /* Enable receive wakeup packet */ RXCS_MAGIC = 0x00000020, /* Enable receive magic packet */ RXCS_SHORT = 0x00000010, /* Enable receive short packet */ - RXCS_ABORT = 0x00000008, /* Enable receive errorr packet */ + RXCS_ABORT = 0x00000008, /* Enable receive error packet */ RXCS_QST = 0x00000004, /* Receive queue start */ RXCS_SUSPEND = 0x00000002, RXCS_ENABLE = 0x00000001, diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h index 061fcd444d50..3ed5670f01c2 100644 --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h @@ -729,7 +729,7 @@ #define MVPP2_MAX_TXQ 8 /* MVPP2_MAX_TSO_SEGS is the maximum number of fragments to allow in the GSO - * skb. As we need a maxium of two descriptors per fragments (1 header, 1 data), + * skb. As we need a maximum of two descriptors per fragments (1 header, 1 data), * multiply this value by two to count the maximum number of skb descs needed. */ #define MVPP2_MAX_TSO_SEGS 300 diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c index 93e978bdf303..ad677cfddb4d 100644 --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c @@ -382,7 +382,7 @@ static int mvpp2_prs_flow_find(struct mvpp2 *priv, int flow) struct mvpp2_prs_entry pe; int tid; - /* Go through the all entires with MVPP2_PRS_LU_FLOWS */ + /* Go through the all entries with MVPP2_PRS_LU_FLOWS */ for (tid = MVPP2_PRS_TCAM_SRAM_SIZE - 1; tid >= 0; tid--) { u8 bits; @@ -1212,7 +1212,7 @@ static void mvpp2_prs_mh_init(struct mvpp2 *priv) mvpp2_prs_hw_write(priv, &pe); } -/* Set default entires (place holder) for promiscuous, non-promiscuous and +/* Set default entries (place holder) for promiscuous, non-promiscuous and * multicast MAC addresses */ static void mvpp2_prs_mac_init(struct mvpp2 *priv) @@ -2241,7 +2241,7 @@ mvpp2_prs_mac_da_range_find(struct mvpp2 *priv, int pmap, const u8 *da, struct mvpp2_prs_entry pe; int tid; - /* Go through the all entires with MVPP2_PRS_LU_MAC */ + /* Go through the all entries with MVPP2_PRS_LU_MAC */ for (tid = MVPP2_PE_MAC_RANGE_START; tid <= MVPP2_PE_MAC_RANGE_END; tid++) { unsigned int entry_pmap; @@ -2539,7 +2539,7 @@ int mvpp2_prs_def_flow(struct mvpp2_port *port) /* Such entry not exist */ if (tid < 0) { - /* Go through the all entires from last to first */ + /* Go through the all entries from last to first */ tid = mvpp2_prs_tcam_first_free(port->priv, MVPP2_PE_LAST_FREE_TID, MVPP2_PE_FIRST_FREE_TID); diff --git a/drivers/net/ethernet/marvell/octeontx2/af/npc.h b/drivers/net/ethernet/marvell/octeontx2/af/npc.h index 719b3618eeb5..309244fe8754 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/npc.h +++ b/drivers/net/ethernet/marvell/octeontx2/af/npc.h @@ -84,7 +84,7 @@ enum npc_kpu_lc_ltype { NPC_LT_LC_CUSTOM1 = 0xF, }; -/* Don't modify Ltypes upto SCTP, otherwise it will +/* Don't modify Ltypes up to SCTP, otherwise it will * effect flow tag calculation and thus RSS. */ enum npc_kpu_ld_ltype { @@ -140,7 +140,7 @@ enum npc_kpu_lg_ltype { NPC_LT_LG_CUSTOM1 = 0xF, }; -/* Don't modify Ltypes upto SCTP, otherwise it will +/* Don't modify Ltypes up to SCTP, otherwise it will * effect flow tag calculation and thus RSS. */ enum npc_kpu_lh_ltype { diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c index 153eb57bad06..d80d2c00bd84 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c @@ -4974,7 +4974,7 @@ static void rvu_nix_setup_capabilities(struct rvu *rvu, int blkaddr) /* On OcteonTx2 DWRR quantum is directly configured into each of * the transmit scheduler queues. And PF/VF drivers were free to - * config any value upto 2^24. + * config any value up to 2^24. * On CN10K, HW is modified, the quantum configuration at scheduler * queues is in terms of weight. And SW needs to setup a base DWRR MTU * at NIX_AF_DWRR_RPM_MTU / NIX_AF_DWRR_SDP_MTU. HW will do diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/cn10k.c b/drivers/net/ethernet/marvell/octeontx2/nic/cn10k.c index 3e1bf22cba69..f98ef5431c90 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/cn10k.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/cn10k.c @@ -301,7 +301,7 @@ static void cn10k_get_ingress_rate_cfg(u64 rate, u32 *rate_exp, * policer timeunit * 2^rdiv ie 2 * 2^rdiv usecs, to the token bucket. * Here policer timeunit is 2 usecs and rate is in bits per sec. * Since floating point cannot be used below algorithm uses 1000000 - * scale factor to support rates upto 100Gbps. + * scale factor to support rates up to 100Gbps. */ tmp = rate * 32 * 2; if (tmp < 256000000) { diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_dcbnl.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_dcbnl.c index f110dfa42360..91d346d114af 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_dcbnl.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_dcbnl.c @@ -67,7 +67,7 @@ static int otx2_pfc_txschq_alloc_one(struct otx2_nic *pfvf, u8 prio) if (!req) return -ENOMEM; - /* Request one schq per level upto max level as configured + /* Request one schq per level up to max level as configured * link config level. These rest of the scheduler can be * same as hw.txschq_list. */ diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c index c995f2900859..596ab7a4c080 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c @@ -3007,7 +3007,7 @@ int otx2_realloc_msix_vectors(struct otx2_nic *pf) int num_vec, err; /* NPA interrupts are inot registered, so alloc only - * upto NIX vector offset. + * up to NIX vector offset. */ num_vec = hw->nix_msixoff; num_vec += NIX_LF_CINT_VEC_START + hw->max_queues; diff --git a/drivers/net/ethernet/marvell/pxa168_eth.c b/drivers/net/ethernet/marvell/pxa168_eth.c index bbbbbba63e15..2370b2ddba6b 100644 --- a/drivers/net/ethernet/marvell/pxa168_eth.c +++ b/drivers/net/ethernet/marvell/pxa168_eth.c @@ -514,7 +514,7 @@ static int add_del_hash_entry(struct pxa168_eth_private *pep, /* * ---------------------------------------------------------------------------- * Create an addressTable entry from MAC address info - * found in the specifed net_device struct + * found in the specified net_device struct * * Input : pointer to ethernet interface network device structure * Output : N/A @@ -806,7 +806,7 @@ static int rxq_process(struct net_device *dev, int budget) stats->rx_bytes += rx_desc->byte_cnt; /* * In case received a packet without first / last bits on OR - * the error summary bit is on, the packets needs to be droped. + * the error summary bit is on, the packets needs to be dropped. */ if (((cmd_sts & (RX_FIRST_DESC | RX_LAST_DESC)) != (RX_FIRST_DESC | RX_LAST_DESC)) diff --git a/drivers/net/ethernet/mellanox/mlx4/eq.c b/drivers/net/ethernet/mellanox/mlx4/eq.c index f1c3da04de7f..034dda0ec06b 100644 --- a/drivers/net/ethernet/mellanox/mlx4/eq.c +++ b/drivers/net/ethernet/mellanox/mlx4/eq.c @@ -1553,7 +1553,7 @@ void mlx4_release_eq(struct mlx4_dev *dev, int vec) mutex_lock(&priv->msix_ctl.pool_lock); priv->eq_table.eq[eq_vec].ref_count--; - /* once we allocated EQ, we don't release it because it might be binded + /* once we allocated EQ, we don't release it because it might be bound * to cpu_rmap. */ mutex_unlock(&priv->msix_ctl.pool_lock); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc/sample.c b/drivers/net/ethernet/mellanox/mlx5/core/en/tc/sample.c index 89490f687a9c..402973ca8c1b 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc/sample.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc/sample.c @@ -353,7 +353,7 @@ add_post_rule(struct mlx5_eswitch *esw, struct mlx5e_sample_flow *sample_flow, /* Allocate default table per vport, chain and prio. Otherwise, there is * only one default table for the same sampler object. Rules with different * prio and chain may overlap. For CT sample action, per vport default - * table is needed to resotre the metadata. + * table is needed to restore the metadata. */ per_vport_tbl_attr.chain = attr->chain; per_vport_tbl_attr.prio = attr->prio; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/tout.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/tout.c index d9be0d9c9a13..7bcc49e6fd43 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/lib/tout.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/tout.c @@ -67,7 +67,7 @@ static u64 tout_convert_reg_field_to_ms(u32 to_mul, u32 to_val) u64 msec = to_val; to_mul &= 0x3; - /* convert hours/minutes/seconds to miliseconds */ + /* convert hours/minutes/seconds to milliseconds */ if (to_mul) msec *= 1000 * int_pow(60, to_mul - 1); diff --git a/drivers/net/ethernet/mellanox/mlxsw/i2c.c b/drivers/net/ethernet/mellanox/mlxsw/i2c.c index 60a50222f33a..2e2539b24fe7 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/i2c.c +++ b/drivers/net/ethernet/mellanox/mlxsw/i2c.c @@ -670,7 +670,7 @@ static int mlxsw_i2c_probe(struct i2c_client *client) * For this purpose QUERY_FW is to be issued with opcode modifier equal * 0x01. For such command the output parameter is an immediate value. * Here QUERY_FW command is invoked for ASIC probing and for getting - * local mailboxes addresses from immedate output parameters. + * local mailboxes addresses from immediate output parameters. */ /* Prepare and write out Command Interface Register for transaction */ diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h index 01fcbd1c8d01..6de4e653cc38 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/reg.h +++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h @@ -2709,7 +2709,7 @@ MLXSW_REG_DEFINE(pagt, MLXSW_REG_PAGT_ID, MLXSW_REG_PAGT_LEN); * Range 0 .. cap_max_acl_group_size (hard coded to 16 for now) * Total number of ACLs in all groups must be lower or equal * to cap_max_acl_tot_groups - * Note: a group which is binded must not be invalidated + * Note: a group which is bound must not be invalidated * Access: Index */ MLXSW_ITEM32(reg, pagt, size, 0x00, 0, 8); diff --git a/drivers/net/ethernet/natsemi/sonic.h b/drivers/net/ethernet/natsemi/sonic.h index a5b803eb8c8a..669501e92545 100644 --- a/drivers/net/ethernet/natsemi/sonic.h +++ b/drivers/net/ethernet/natsemi/sonic.h @@ -300,7 +300,7 @@ struct sonic_local { int reg_offset; void *descriptors; /* Crud. These areas have to be within the same 64K. Therefore - we allocate a desriptors page, and point these to places within it. */ + we allocate a descriptors page, and point these to places within it. */ void *cda; /* CAM descriptor area */ void *tda; /* Transmit descriptor area */ void *rra; /* Receive resource area */ diff --git a/drivers/net/ethernet/nvidia/forcedeth.c b/drivers/net/ethernet/nvidia/forcedeth.c index f0218a0eab5c..40130164dad2 100644 --- a/drivers/net/ethernet/nvidia/forcedeth.c +++ b/drivers/net/ethernet/nvidia/forcedeth.c @@ -794,7 +794,7 @@ struct fe_priv { void __iomem *base; /* rx specific fields. - * Locking: Within irq hander or disable_irq+spin_lock(&np->lock); + * Locking: Within irq handler or disable_irq+spin_lock(&np->lock); */ union ring_type get_rx, put_rx, last_rx; struct nv_skb_map *get_rx_ctx, *put_rx_ctx; @@ -815,7 +815,7 @@ struct fe_priv { struct nv_txrx_stats __percpu *txrx_stats; /* media detection workaround. - * Locking: Within irq hander or disable_irq+spin_lock(&np->lock); + * Locking: Within irq handler or disable_irq+spin_lock(&np->lock); */ int need_linktimer; unsigned long link_timeout; diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c index fef4b2b0b1f2..79d6a819bf90 100644 --- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c +++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c @@ -17,7 +17,7 @@ netxen_poll_rsp(struct netxen_adapter *adapter) int timeout = 0; do { - /* give atleast 1ms for firmware to respond */ + /* give at least 1ms for firmware to respond */ msleep(1); if (++timeout > NX_OS_CRB_RETRY_COUNT) diff --git a/drivers/net/ethernet/qlogic/qed/qed_cxt.c b/drivers/net/ethernet/qlogic/qed/qed_cxt.c index b70262e70baf..89b947f82cf0 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_cxt.c +++ b/drivers/net/ethernet/qlogic/qed/qed_cxt.c @@ -561,7 +561,7 @@ int qed_cxt_cfg_ilt_compute(struct qed_hwfn *p_hwfn, u32 *line_count) * block in the ILT client. This is later used to * configure the CDU segment offset registers and * results in an FL command for TIDs of this - * segement behaves as regular load commands + * segment behaves as regular load commands * (loading TIDs from the working memory). */ line = p_cli->pf_blks[CDUT_SEG_BLK(i)].start_line; diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c index dd75c47758e1..95befe4aee5e 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dev.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c @@ -305,7 +305,7 @@ void qed_db_recovery_execute(struct qed_hwfn *p_hwfn) DP_NOTICE(p_hwfn, "Executing doorbell recovery. Counter was %d\n", p_hwfn->db_recovery_info.db_recovery_counter); - /* Track amount of times recovery was executed */ + /* Track number of times recovery was executed */ p_hwfn->db_recovery_info.db_recovery_counter++; /* Protect the list */ diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.h b/drivers/net/ethernet/qlogic/qed/qed_mcp.h index 9bd0565fe8ab..50699d600b8e 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_mcp.h +++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.h @@ -783,7 +783,7 @@ struct qed_mcp_info { u16 mfw_mb_length; u32 mcp_hist; - /* Capabilties negotiated with the MFW */ + /* Capabilities negotiated with the MFW */ u32 capabilities; /* S/N for debug data mailbox commands */ diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index d7c8fadb49de..9728d583b891 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -909,7 +909,7 @@ struct qlcnic_mac_vlan_list { #define QLCNIC_LRO_REQUEST_CLEANUP 4 -/* Capabilites received */ +/* Capabilities received */ #define QLCNIC_FW_CAPABILITY_TSO BIT_1 #define QLCNIC_FW_CAPABILITY_BDG BIT_8 #define QLCNIC_FW_CAPABILITY_FVLANTX BIT_9 diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c index 47cd9ec665ee..ff337a917243 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c @@ -1957,9 +1957,9 @@ static void qlcnic_83xx_template_end(struct qlcnic_adapter *p_dev) * qlcnic_83xx_exec_template_cmd * * @p_dev: adapter structure -* @p_buff: Poiter to instruction template +* @p_buff: Pointer to instruction template * -* Template provides instructions to stop, restart and initalize firmware. +* Template provides instructions to stop, restart and initialize firmware. * These instructions are abstracted as a series of read, write and * poll operations on hardware registers. Register information and operation * specifics are not exposed to the driver. Driver reads the template from diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c index eb827b86ecae..1b94c42d669b 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c @@ -95,7 +95,7 @@ qlcnic_poll_rsp(struct qlcnic_adapter *adapter) int timeout = 0, err = 0; do { - /* give atleast 1ms for firmware to respond */ + /* give at least 1ms for firmware to respond */ mdelay(1); if (++timeout > QLCNIC_OS_CRB_RETRY_COUNT) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index ff4f7cd20c79..23ae76ca81db 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -640,7 +640,7 @@ static int qlcnic_max_rings(struct qlcnic_adapter *adapter, u8 ring_cnt, void qlcnic_set_tx_ring_count(struct qlcnic_adapter *adapter, u8 tx_cnt) { - /* 83xx adapter does not have max_tx_rings intialized in probe */ + /* 83xx adapter does not have max_tx_rings initialized in probe */ if (adapter->max_tx_rings) adapter->drv_tx_rings = qlcnic_max_rings(adapter, tx_cnt, QLCNIC_TX_QUEUE); @@ -650,7 +650,7 @@ void qlcnic_set_tx_ring_count(struct qlcnic_adapter *adapter, u8 tx_cnt) void qlcnic_set_sds_ring_count(struct qlcnic_adapter *adapter, u8 rx_cnt) { - /* 83xx adapter does not have max_sds_rings intialized in probe */ + /* 83xx adapter does not have max_sds_rings initialized in probe */ if (adapter->max_sds_rings) adapter->drv_sds_rings = qlcnic_max_rings(adapter, rx_cnt, QLCNIC_RX_QUEUE); diff --git a/drivers/net/ethernet/qualcomm/emac/emac-mac.c b/drivers/net/ethernet/qualcomm/emac/emac-mac.c index d5c688a8d7be..a4bba0be7dc5 100644 --- a/drivers/net/ethernet/qualcomm/emac/emac-mac.c +++ b/drivers/net/ethernet/qualcomm/emac/emac-mac.c @@ -578,7 +578,7 @@ void emac_mac_stop(struct emac_adapter *adpt) emac_reg_update32(adpt->base + EMAC_RXQ_CTRL_0, RXQ_EN, 0); emac_reg_update32(adpt->base + EMAC_TXQ_CTRL_0, TXQ_EN, 0); emac_reg_update32(adpt->base + EMAC_MAC_CTRL, TXEN | RXEN, 0); - usleep_range(1000, 1050); /* stopping mac may take upto 1msec */ + usleep_range(1000, 1050); /* stopping mac may take up to 1msec */ } /* Free all descriptors of given transmit queue */ diff --git a/drivers/net/ethernet/realtek/8139too.c b/drivers/net/ethernet/realtek/8139too.c index 8241bcf76664..71eb61246254 100644 --- a/drivers/net/ethernet/realtek/8139too.c +++ b/drivers/net/ethernet/realtek/8139too.c @@ -1201,7 +1201,7 @@ static const char mii_2_8139_map[8] = { #ifdef CONFIG_8139TOO_8129 -/* Syncronize the MII management interface by shifting 32 one bits out. */ +/* Synchronize the MII management interface by shifting 32 one bits out. */ static void mdio_sync (void __iomem *ioaddr) { int i; diff --git a/drivers/net/ethernet/realtek/rtase/rtase_main.c b/drivers/net/ethernet/realtek/rtase/rtase_main.c index e3cd4f7c1380..372974ebccb5 100644 --- a/drivers/net/ethernet/realtek/rtase/rtase_main.c +++ b/drivers/net/ethernet/realtek/rtase/rtase_main.c @@ -937,7 +937,7 @@ static void rtase_hw_config(struct net_device *dev) RTASE_RX_MX_DMA_MASK); rtase_w16(tp, RTASE_RX_CONFIG_0, reg_data16); - /* new rx descritpor */ + /* new rx descriptor */ reg_data16 = rtase_r16(tp, RTASE_RX_CONFIG_1); reg_data16 |= RTASE_RX_NEW_DESC_FORMAT_EN | RTASE_PCIE_NEW_FLOW; u16p_replace_bits(®_data16, 0xF, RTASE_RX_MAX_FETCH_DESC_MASK); diff --git a/drivers/net/ethernet/seeq/sgiseeq.c b/drivers/net/ethernet/seeq/sgiseeq.c index 7967a0ee320b..82dff0a52a12 100644 --- a/drivers/net/ethernet/seeq/sgiseeq.c +++ b/drivers/net/ethernet/seeq/sgiseeq.c @@ -619,7 +619,7 @@ sgiseeq_start_xmit(struct sk_buff *skb, struct net_device *dev) * we are changing all of the following. * 2) Do no allow the HPC to look at a new descriptor until * we have completely set up it's state. This means, do - * not clear HPCDMA_EOX in the current last descritptor + * not clear HPCDMA_EOX in the current last descriptor * until the one we are adding looks consistent and could * be processes right now. * 3) The tx interrupt code must notice when we've added a new diff --git a/drivers/net/ethernet/sfc/falcon/falcon.c b/drivers/net/ethernet/sfc/falcon/falcon.c index fb1d19b7c419..10cfce054de9 100644 --- a/drivers/net/ethernet/sfc/falcon/falcon.c +++ b/drivers/net/ethernet/sfc/falcon/falcon.c @@ -2638,7 +2638,7 @@ void falcon_start_nic_stats(struct ef4_nic *efx) spin_unlock_bh(&efx->stats_lock); } -/* We don't acutally pull stats on falcon. Wait 10ms so that +/* We don't actually pull stats on falcon. Wait 10ms so that * they arrive when we call this just after start_stats */ static void falcon_pull_nic_stats(struct ef4_nic *efx) diff --git a/drivers/net/ethernet/sfc/mcdi_pcol.h b/drivers/net/ethernet/sfc/mcdi_pcol.h index b9866e389e6d..b00e7c100566 100644 --- a/drivers/net/ethernet/sfc/mcdi_pcol.h +++ b/drivers/net/ethernet/sfc/mcdi_pcol.h @@ -5736,7 +5736,7 @@ /* Enum values, see field(s): */ /* MC_CMD_ETH_TECH/TECH */ /* Pause abilities to advertise during auto-negotiation. Valid when auto- - * negotation is enabled and MC_CMD_SET_MAC_IN/FCTL is set to + * negotiation is enabled and MC_CMD_SET_MAC_IN/FCTL is set to * MC_CMD_FCNTL_AUTO. If auto-negotiation is disabled the driver must * explicitly configure pause mode with MC_CMD_SET_MAC. */ @@ -10173,7 +10173,7 @@ * configuration. */ #define MC_CMD_GET_FIXED_PORT_PROPERTIES_IN_LEN 4 -/* Handle to the port to from which to retreive properties */ +/* Handle to the port to from which to retrieve properties */ #define MC_CMD_GET_FIXED_PORT_PROPERTIES_IN_PORT_HANDLE_OFST 0 #define MC_CMD_GET_FIXED_PORT_PROPERTIES_IN_PORT_HANDLE_LEN 4 @@ -13547,7 +13547,7 @@ * an ancestor of the current user (see MC_CMD_SET_VI_USER). Note that LL * queues require this to be called after allocation but before initialisation * of the queue. TLP options of a queue are fixed after queue is initialised, - * with the values set to current global value or they can be overriden using + * with the values set to current global value or they can be overridden using * this command. At LL queue allocation, all overrides are cleared. */ #define MC_CMD_SET_VI_TLP_PROCESSING 0xb1 @@ -21387,7 +21387,7 @@ #define MC_CMD_PRIVILEGE_MASK_IN_GRP_ALL_MULTICAST 0x200 /* enum */ #define MC_CMD_PRIVILEGE_MASK_IN_GRP_PROMISCUOUS 0x400 /* enum */ /* enum: Allows to set the TX packets' source MAC address to any arbitrary MAC - * adress. + * address. */ #define MC_CMD_PRIVILEGE_MASK_IN_GRP_MAC_SPOOFING_TX 0x800 /* enum: Privilege that allows a Function to change the MAC address configured diff --git a/drivers/net/ethernet/sfc/siena/mcdi_pcol.h b/drivers/net/ethernet/sfc/siena/mcdi_pcol.h index b81b0aa460d2..4d1da698c524 100644 --- a/drivers/net/ethernet/sfc/siena/mcdi_pcol.h +++ b/drivers/net/ethernet/sfc/siena/mcdi_pcol.h @@ -6861,7 +6861,7 @@ /***********************************/ /* MC_CMD_CLP * Perform a CLP related operation, see SF-110495-PS for details of CLP - * processing. This command has been extended to accomodate the requirements of + * processing. This command has been extended to accommodate the requirements of * different manufacturers which are to be found in SF-119187-TC, SF-119186-TC, * SF-120509-TC and SF-117282-PS. */ @@ -16293,7 +16293,7 @@ /***********************************/ /* MC_CMD_GET_LICENSED_V3_FEATURE_STATES - * Query the state of an one or more licensed features. (Note that the actual + * Query the state of a one or more licensed features. (Note that the actual * state may be invalidated by the MC_CMD_LICENSING_V3 OP_UPDATE_LICENSE * operation or a reboot of the MC.) Used for V3 licensing (Medford) */ @@ -16798,7 +16798,7 @@ #define MC_CMD_PRIVILEGE_MASK_IN_GRP_ALL_MULTICAST 0x200 /* enum */ #define MC_CMD_PRIVILEGE_MASK_IN_GRP_PROMISCUOUS 0x400 /* enum */ /* enum: Allows to set the TX packets' source MAC address to any arbitrary MAC - * adress. + * address. */ #define MC_CMD_PRIVILEGE_MASK_IN_GRP_MAC_SPOOFING_TX 0x800 /* enum: Privilege that allows a Function to change the MAC address configured diff --git a/drivers/net/ethernet/sfc/siena/ptp.c b/drivers/net/ethernet/sfc/siena/ptp.c index 0b723a127364..44c9f93d466d 100644 --- a/drivers/net/ethernet/sfc/siena/ptp.c +++ b/drivers/net/ethernet/sfc/siena/ptp.c @@ -1835,7 +1835,7 @@ static void ptp_event_failure(struct efx_nic *efx, int expected_frag_len) /* Process a completed receive event. Put it on the event queue and * start worker thread. This is required because event and their - * correspoding packets may come in either order. + * corresponding packets may come in either order. */ static void ptp_event_rx(struct efx_nic *efx, struct efx_ptp_data *ptp) { diff --git a/drivers/net/ethernet/sgi/meth.h b/drivers/net/ethernet/sgi/meth.h index 2ba15c263e8b..973692a3b6ca 100644 --- a/drivers/net/ethernet/sgi/meth.h +++ b/drivers/net/ethernet/sgi/meth.h @@ -37,7 +37,7 @@ typedef struct tx_packet_hdr { u64 cat_ptr3_valid:1, /*Concatination pointer valid flags*/ cat_ptr2_valid:1, cat_ptr1_valid:1; - u64 tx_int_flag:1; /*Generate TX intrrupt when packet has been sent*/ + u64 tx_int_flag:1; /*Generate TX interrupt when packet has been sent*/ u64 term_dma_flag:1; /*Terminate transmit DMA on transmit abort conditions*/ u64 data_offset:7; /*Starting byte offset in ring data block*/ u64 data_len:16; /*Length of valid data in bytes-1*/ diff --git a/drivers/net/ethernet/silan/sc92031.c b/drivers/net/ethernet/silan/sc92031.c index ff4197f5e46d..55f473b16d82 100644 --- a/drivers/net/ethernet/silan/sc92031.c +++ b/drivers/net/ethernet/silan/sc92031.c @@ -87,7 +87,7 @@ MODULE_PARM_DESC(media, "Media type (0x00 = autodetect," enum silan_registers { Config0 = 0x00, // Config0 Config1 = 0x04, // Config1 - RxBufWPtr = 0x08, // Rx buffer writer poiter + RxBufWPtr = 0x08, // Rx buffer writer pointer IntrStatus = 0x0C, // Interrupt status IntrMask = 0x10, // Interrupt mask RxbufAddr = 0x14, // Rx buffer start address @@ -109,8 +109,8 @@ enum silan_registers { TimerIntr = 0x78, // Timer interrupt register PMConfig = 0x7C, // Power Manager configuration CRC0 = 0x80, // Power Manager CRC ( Two 32bit regisers) - Wakeup0 = 0x88, // power Manager wakeup( Eight 64bit regiser) - LSBCRC0 = 0xC8, // power Manager LSBCRC(Two 32bit regiser) + Wakeup0 = 0x88, // power Manager wakeup( Eight 64bit register) + LSBCRC0 = 0xC8, // power Manager LSBCRC(Two 32bit register) TestD0 = 0xD0, TestD4 = 0xD4, TestD8 = 0xD8, diff --git a/drivers/net/ethernet/sis/sis900.c b/drivers/net/ethernet/sis/sis900.c index 6e9afd9042f7..35e1fe22806f 100644 --- a/drivers/net/ethernet/sis/sis900.c +++ b/drivers/net/ethernet/sis/sis900.c @@ -2394,7 +2394,7 @@ static void set_rx_mode(struct net_device *net_dev) for (i = 0; i < table_entries; i++) mc_filter[i] = 0xffff; } else { - /* Accept Broadcast packet, destination address matchs our + /* Accept Broadcast packet, destination address matches our * MAC address, use Receive Filter to reject unwanted MCAST * packets */ struct netdev_hw_addr *ha; diff --git a/drivers/net/ethernet/smsc/smsc9420.c b/drivers/net/ethernet/smsc/smsc9420.c index 0c97211b6254..020ff5cd5690 100644 --- a/drivers/net/ethernet/smsc/smsc9420.c +++ b/drivers/net/ethernet/smsc/smsc9420.c @@ -563,7 +563,7 @@ static void smsc9420_stop_rx(struct smsc9420_pdata *pd) smsc9420_reg_write(pd, DMAC_INTR_ENA, dma_intr_ena); smsc9420_pci_flush_write(pd); - /* stop RX MAC prior to stoping DMA */ + /* stop RX MAC prior to stopping DMA */ mac_cr = smsc9420_reg_read(pd, MAC_CR) & (~MAC_CR_RXEN_); smsc9420_reg_write(pd, MAC_CR, mac_cr); smsc9420_pci_flush_write(pd); diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c index f5f9fa67ecd7..cdfdd9806e14 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c @@ -1312,7 +1312,7 @@ static int intel_eth_pci_probe(struct pci_dev *pdev, /* Initialize all MSI vectors to invalid so that it can be set * according to platform data settings below. - * Note: MSI vector takes value from 0 upto 31 (STMMAC_MSI_VEC_MAX) + * Note: MSI vector takes value from 0 up to 31 (STMMAC_MSI_VEC_MAX) */ plat->msi_mac_vec = STMMAC_MSI_VEC_MAX; plat->msi_wol_vec = STMMAC_MSI_VEC_MAX; diff --git a/drivers/net/ethernet/sun/cassini.h b/drivers/net/ethernet/sun/cassini.h index 0c24547a4534..e5bfdd0b7a02 100644 --- a/drivers/net/ethernet/sun/cassini.h +++ b/drivers/net/ethernet/sun/cassini.h @@ -704,7 +704,7 @@ 0x4 = load 3, 0x5 = load 4 0x6 = last detect 0x7 = wait req - 0x8 = wait req statuss 1st + 0x8 = wait req status 1st 0x9 = load st 0xa = bubble mac 0xb = error */ diff --git a/drivers/net/ethernet/synopsys/dwc-xlgmac-common.c b/drivers/net/ethernet/synopsys/dwc-xlgmac-common.c index 131786aa4d5b..f532e8b6d24f 100644 --- a/drivers/net/ethernet/synopsys/dwc-xlgmac-common.c +++ b/drivers/net/ethernet/synopsys/dwc-xlgmac-common.c @@ -98,7 +98,7 @@ static int xlgmac_init(struct xlgmac_pdata *pdata) return ret; } - /* Channel and ring params initializtion + /* Channel and ring params initialization * pdata->channel_count; * pdata->tx_ring_count; * pdata->rx_ring_count; diff --git a/drivers/net/ethernet/synopsys/dwc-xlgmac-hw.c b/drivers/net/ethernet/synopsys/dwc-xlgmac-hw.c index 76eb7db80f13..1fef9f4b15c0 100644 --- a/drivers/net/ethernet/synopsys/dwc-xlgmac-hw.c +++ b/drivers/net/ethernet/synopsys/dwc-xlgmac-hw.c @@ -1060,7 +1060,7 @@ static void xlgmac_tx_desc_init(struct xlgmac_channel *channel) int start_index = ring->cur; int i; - /* Initialze all descriptors */ + /* Initialize all descriptors */ for (i = 0; i < ring->dma_desc_count; i++) { desc_data = XLGMAC_GET_DESC_DATA(ring, i); diff --git a/drivers/net/ethernet/tehuti/tehuti.c b/drivers/net/ethernet/tehuti/tehuti.c index 2cee1f05ac47..6c5bc4479046 100644 --- a/drivers/net/ethernet/tehuti/tehuti.c +++ b/drivers/net/ethernet/tehuti/tehuti.c @@ -313,7 +313,7 @@ static int bdx_poll(struct napi_struct *napi, int budget) * @priv: NIC private structure * * Firmware is loaded via TXD fifo, so it must be initialized first. - * Firware must be loaded once per NIC not per PCI device provided by NIC (NIC + * Firmware must be loaded once per NIC not per PCI device provided by NIC (NIC * can have few of them). So all drivers use semaphore register to choose one * that will actually load FW to NIC. */ @@ -1184,7 +1184,7 @@ static void bdx_recycle_skb(struct bdx_priv *priv, struct rxd_desc *rxdd) * @budget: maximum number of packets to receive */ -/* TBD: replace memcpy func call by explicite inline asm */ +/* TBD: replace memcpy func call by explicit inline asm */ static int bdx_rx_receive(struct bdx_priv *priv, struct rxd_fifo *f, int budget) { @@ -1324,13 +1324,13 @@ static void print_rxfd(struct rxf_desc *rxfd) * 1) TX Free Fifo - TXF - holds ack descriptors for sent packets * 2) TX Data Fifo - TXD - holds descriptors of full buffers. * - * Currently NIC supports TSO, checksuming and gather DMA + * Currently NIC supports TSO, checksumming and gather DMA * UFO and IP fragmentation is on the way * * RX SW Data Structures * ~~~~~~~~~~~~~~~~~~~~~ * txdb - used to keep track of all skbs owned by SW and their dma addresses. - * For TX case, ownership lasts from geting packet via hard_xmit and until HW + * For TX case, ownership lasts from getting packet via hard_xmit and until HW * acknowledges sent by TXF descriptors. * Implemented as cyclic buffer. * fifo - keeps info about fifo's size and location, relevant HW registers, diff --git a/drivers/net/ethernet/ti/tlan.c b/drivers/net/ethernet/ti/tlan.c index 274a1837025c..e5f563762eb6 100644 --- a/drivers/net/ethernet/ti/tlan.c +++ b/drivers/net/ethernet/ti/tlan.c @@ -1299,7 +1299,7 @@ static void tlan_set_multicast_list(struct net_device *dev) ThunderLAN driver interrupt vectors and table please see chap. 4, "Interrupt Handling" of the "ThunderLAN -Programmer's Guide" for more informations on handling interrupts +Programmer's Guide" for more information on handling interrupts generated by TLAN based adapters. ****************************************************************************** diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_net.c b/drivers/net/ethernet/toshiba/ps3_gelic_net.c index d35d1f3c10a1..ef4632e2adc8 100644 --- a/drivers/net/ethernet/toshiba/ps3_gelic_net.c +++ b/drivers/net/ethernet/toshiba/ps3_gelic_net.c @@ -1412,7 +1412,7 @@ static const struct ethtool_ops gelic_ether_ethtool_ops = { /** * gelic_net_tx_timeout_task - task scheduled by the watchdog timeout * function (to be called not under interrupt status) - * @work: work is context of tx timout task + * @work: work is context of tx timeout task * * called as task when tx hangs, resets interface (if interface is up) */ diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_net.h b/drivers/net/ethernet/toshiba/ps3_gelic_net.h index c10f1984a5a1..034b1712aca8 100644 --- a/drivers/net/ethernet/toshiba/ps3_gelic_net.h +++ b/drivers/net/ethernet/toshiba/ps3_gelic_net.h @@ -93,7 +93,7 @@ enum gelic_descr_tx_status { /* RX descriptor data error bits */ enum gelic_descr_rx_error { /* bit 31 reserved */ - GELIC_DESCR_RXALNERR = 0x40000000, /* alignement error 10/100M */ + GELIC_DESCR_RXALNERR = 0x40000000, /* alignment error 10/100M */ GELIC_DESCR_RXOVERERR = 0x20000000, /* oversize error */ GELIC_DESCR_RXRNTERR = 0x10000000, /* Runt error */ GELIC_DESCR_RXIPCHKERR = 0x08000000, /* IP checksum error */ diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_wireless.c b/drivers/net/ethernet/toshiba/ps3_gelic_wireless.c index 88669aa53f65..6df4697025fa 100644 --- a/drivers/net/ethernet/toshiba/ps3_gelic_wireless.c +++ b/drivers/net/ethernet/toshiba/ps3_gelic_wireless.c @@ -556,7 +556,7 @@ static void gelic_wl_parse_ie(u8 *data, size_t len, /* - * translate the scan informations from hypervisor to a + * translate the scan information from hypervisor to a * independent format */ static char *gelic_wl_translate_scan(struct net_device *netdev, diff --git a/drivers/net/ethernet/via/via-rhine.c b/drivers/net/ethernet/via/via-rhine.c index e56ebbdd428d..69ab8c450a1d 100644 --- a/drivers/net/ethernet/via/via-rhine.c +++ b/drivers/net/ethernet/via/via-rhine.c @@ -225,7 +225,7 @@ The chip does not pad to minimum transmit length. /* This table drives the PCI probe routines. It's mostly boilerplate in all of the drivers, and will likely be provided by some future kernel. - Note the matching code -- the first table entry matchs all 56** cards but + Note the matching code -- the first table entry matches all 56** cards but second only the 1234 card. */ diff --git a/drivers/net/ethernet/via/via-velocity.c b/drivers/net/ethernet/via/via-velocity.c index 6d7b6f3b4633..f9e25cf3cd0d 100644 --- a/drivers/net/ethernet/via/via-velocity.c +++ b/drivers/net/ethernet/via/via-velocity.c @@ -302,7 +302,7 @@ VELOCITY_PARAM(DMA_length, "DMA length"); 0: indicate the IP header won't be DWORD byte aligned.(Default) . 1: indicate the IP header will be DWORD byte aligned. In some environment, the IP header should be DWORD byte aligned, - or the packet will be droped when we receive it. (eg: IPVS) + or the packet will be dropped when we receive it. (eg: IPVS) */ VELOCITY_PARAM(IP_byte_align, "Enable IP header dword aligned"); @@ -311,7 +311,7 @@ VELOCITY_PARAM(IP_byte_align, "Enable IP header dword aligned"); #define FLOW_CNTL_MAX 5 /* flow_control[] is used for setting the flow control ability of NIC. - 1: hardware deafult - AUTO (default). Use Hardware default value in ANAR. + 1: hardware default - AUTO (default). Use Hardware default value in ANAR. 2: enable TX flow control. 3: enable RX flow control. 4: enable RX/TX flow control. @@ -340,10 +340,10 @@ VELOCITY_PARAM(speed_duplex, "Setting the speed and duplex mode"); #define WOL_OPT_MIN 0 #define WOL_OPT_MAX 7 /* wol_opts[] is used for controlling wake on lan behavior. - 0: Wake up if recevied a magic packet. (Default) + 0: Wake up if received a magic packet. (Default) 1: Wake up if link status is on/off. - 2: Wake up if recevied an arp packet. - 4: Wake up if recevied any unicast packet. + 2: Wake up if received an arp packet. + 4: Wake up if received any unicast packet. Those value can be sumed up to support more than one option. */ VELOCITY_PARAM(wol_opts, "Wake On Lan options"); diff --git a/drivers/net/fddi/skfp/cfm.c b/drivers/net/fddi/skfp/cfm.c index 4eea3408034b..b722a195d831 100644 --- a/drivers/net/fddi/skfp/cfm.c +++ b/drivers/net/fddi/skfp/cfm.c @@ -17,7 +17,7 @@ */ /* - * Hardware independent state machine implemantation + * Hardware independent state machine implementation * The following external SMT functions are referenced : * * queue_event() diff --git a/drivers/net/fddi/skfp/ecm.c b/drivers/net/fddi/skfp/ecm.c index 2f5f5f26bb43..e418ab65cb61 100644 --- a/drivers/net/fddi/skfp/ecm.c +++ b/drivers/net/fddi/skfp/ecm.c @@ -17,7 +17,7 @@ */ /* - * Hardware independent state machine implemantation + * Hardware independent state machine implementation * The following external SMT functions are referenced : * * queue_event() diff --git a/drivers/net/fddi/skfp/fplustm.c b/drivers/net/fddi/skfp/fplustm.c index 036062376c06..0d4201345f9b 100644 --- a/drivers/net/fddi/skfp/fplustm.c +++ b/drivers/net/fddi/skfp/fplustm.c @@ -150,7 +150,7 @@ static u_long read_mdr(struct s_smc *smc, unsigned int addr) CHECK_NPP() ; MARR(addr) ; outpw(FM_A(FM_CMDREG1),FM_IRMEMWO) ; - CHECK_NPP() ; /* needed for PCI to prevent from timeing violations */ + CHECK_NPP() ; /* needed for PCI to prevent from timing violations */ /* p = MDRR() ; */ /* bad read values if the workaround */ /* smc->hw.mc_dummy = *((short volatile far *)(addr)))*/ /* is used */ @@ -572,7 +572,7 @@ Note After any ring operational change the transmit complete The operating system dependent module must enable the transmit complete interrupt of a queue, - when it queues the first frame, - because of no transmit resources are beeing + because of no transmit resources are being available and - when it escapes from the function llc_restart_tx while some frames are still queued. diff --git a/drivers/net/fddi/skfp/h/hwmtm.h b/drivers/net/fddi/skfp/h/hwmtm.h index e97db826cdd4..0ab49cc0a8bd 100644 --- a/drivers/net/fddi/skfp/h/hwmtm.h +++ b/drivers/net/fddi/skfp/h/hwmtm.h @@ -113,7 +113,7 @@ struct hw_modul { struct s_mbuf_pool mbuf_pool ; struct hwm_r r ; - union s_fp_descr volatile *descr_p ; /* points to the desriptor area */ + union s_fp_descr volatile *descr_p ; /* points to the descriptor area */ u_short pass_SMT ; /* pass SMT frames */ u_short pass_NSA ; /* pass all NSA frames */ diff --git a/drivers/net/fddi/skfp/h/sba.h b/drivers/net/fddi/skfp/h/sba.h index f30301fcd022..7fe99c12e201 100644 --- a/drivers/net/fddi/skfp/h/sba.h +++ b/drivers/net/fddi/skfp/h/sba.h @@ -94,7 +94,7 @@ struct s_sba { long msg_mib_ov ; /* Current Overhead for this Path*/ long msg_category ; /* Category of the Allocation */ u_long msg_max_t_neg ; /* longest T_Neg acceptable */ - u_long msg_min_seg_siz ; /* minimum segement size */ + u_long msg_min_seg_siz ; /* minimum segment size */ struct smt_header *sm ; /* points to the rec message */ struct fddi_addr *msg_alloc_addr ; /* Allocation Address */ diff --git a/drivers/net/fddi/skfp/pcmplc.c b/drivers/net/fddi/skfp/pcmplc.c index 90e8df6d9a88..745285d4d6d2 100644 --- a/drivers/net/fddi/skfp/pcmplc.c +++ b/drivers/net/fddi/skfp/pcmplc.c @@ -16,7 +16,7 @@ */ /* - * Hardware independent state machine implemantation + * Hardware independent state machine implementation * The following external SMT functions are referenced : * * queue_event() diff --git a/drivers/net/fddi/skfp/rmt.c b/drivers/net/fddi/skfp/rmt.c index 314623650a84..5708124f05d2 100644 --- a/drivers/net/fddi/skfp/rmt.c +++ b/drivers/net/fddi/skfp/rmt.c @@ -16,7 +16,7 @@ */ /* - * Hardware independent state machine implemantation + * Hardware independent state machine implementation * The following external SMT functions are referenced : * * queue_event() diff --git a/drivers/net/ipa/ipa_interrupt.h b/drivers/net/ipa/ipa_interrupt.h index d11c4af14fa2..362fb9eb7900 100644 --- a/drivers/net/ipa/ipa_interrupt.h +++ b/drivers/net/ipa/ipa_interrupt.h @@ -21,7 +21,7 @@ enum ipa_irq_id; * @endpoint_id: Endpoint whose interrupt should be enabled * * Note: The "TX" in the name is from the perspective of the IPA hardware. - * A TX_SUSPEND interrupt arrives on an AP RX enpoint when packet data can't + * A TX_SUSPEND interrupt arrives on an AP RX endpoint when packet data can't * be delivered to the endpoint because it is suspended (or its underlying * channel is stopped). */ diff --git a/drivers/net/phy/bcm87xx.c b/drivers/net/phy/bcm87xx.c index 299f9a8f30f4..5c39fc3a5d65 100644 --- a/drivers/net/phy/bcm87xx.c +++ b/drivers/net/phy/bcm87xx.c @@ -28,7 +28,7 @@ * devid: which sub-device to use. * reg: the register. * mask: if non-zero, ANDed with existing register value. - * value: ORed with the masked value and written to the regiser. + * value: ORed with the masked value and written to the register. * */ static int bcm87xx_of_reg_init(struct phy_device *phydev) diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index f71cffa88406..fc67331a8f2c 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -526,7 +526,7 @@ static int m88e1101_config_aneg(struct phy_device *phydev) * reg-page: which register bank to use. * reg: the register. * mask: if non-zero, ANDed with existing register value. - * value: ORed with the masked value and written to the regiser. + * value: ORed with the masked value and written to the register. * */ static int marvell_of_reg_init(struct phy_device *phydev) diff --git a/drivers/net/ppp/ppp_generic.c b/drivers/net/ppp/ppp_generic.c index 1a610a18893b..d157398da060 100644 --- a/drivers/net/ppp/ppp_generic.c +++ b/drivers/net/ppp/ppp_generic.c @@ -2091,7 +2091,7 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb) /* *check if we are on the last channel or - *we exceded the length of the data to + *we exceeded the length of the data to *fragment */ if ((nfree <= 0) || (flen > len)) @@ -3305,7 +3305,7 @@ find_compressor(int type) } /* - * Miscelleneous stuff. + * Miscellaneous stuff. */ static void diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c index 81d8412ce8e2..4ef641644cf8 100644 --- a/drivers/net/usb/ax88179_178a.c +++ b/drivers/net/usb/ax88179_178a.c @@ -1392,8 +1392,8 @@ static int ax88179_rx_fixup(struct usbnet *dev, struct sk_buff *skb) * pkt_cnt and hdr_off (offset of * <per-packet metadata entry 1>) * - * pkt_cnt is number of entrys in the per-packet metadata. - * In current firmware there is 2 entrys per packet. + * pkt_cnt is number of entries in the per-packet metadata. + * In current firmware there is 2 entries per packet. * The first points to the packet and the * second is a dummy header. * This was done probably to align fields in 64-bit and diff --git a/drivers/net/wan/slic_ds26522.c b/drivers/net/wan/slic_ds26522.c index cbb99fc5ea9f..353e44e3113f 100644 --- a/drivers/net/wan/slic_ds26522.c +++ b/drivers/net/wan/slic_ds26522.c @@ -165,7 +165,7 @@ static int slic_ds26522_init_configure(struct spi_device *spi) /* Perform RX/TX SRESET,Reset receiver */ slic_write(spi, DS26522_RMMR_ADDR, DS26522_RMMR_SFTRST); - /* Reset tranceiver */ + /* Reset transceiver */ slic_write(spi, DS26522_TMMR_ADDR, DS26522_TMMR_SFTRST); usleep_range(100, 120); diff --git a/drivers/s390/net/ctcm_main.c b/drivers/s390/net/ctcm_main.c index 8b0d76a47d9f..d1305f8d07f5 100644 --- a/drivers/s390/net/ctcm_main.c +++ b/drivers/s390/net/ctcm_main.c @@ -497,7 +497,7 @@ static int ctcm_transmit_skb(struct channel *ch, struct sk_buff *skb) } spin_unlock_irqrestore(&ch->collect_lock, saveflags); /* - * Protect skb against beeing free'd by upper + * Protect skb against being free'd by upper * layers. */ refcount_inc(&skb->users); @@ -688,7 +688,7 @@ static int ctcmpc_transmit_skb(struct channel *ch, struct sk_buff *skb) } /* - * Protect skb against beeing free'd by upper + * Protect skb against being free'd by upper * layers. */ refcount_inc(&skb->users); diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h index 41fe8a043d61..b5fa1726617f 100644 --- a/drivers/s390/net/qeth_core.h +++ b/drivers/s390/net/qeth_core.h @@ -208,7 +208,7 @@ struct qeth_vnicc_info { /*not used unless the microcode gets patched*/ #define QETH_PCI_TIMER_VALUE(card) 3 -/* priority queing */ +/* priority queuing */ #define QETH_PRIOQ_DEFAULT QETH_NO_PRIO_QUEUEING #define QETH_DEFAULT_QUEUE 2 #define QETH_NO_PRIO_QUEUEING 0 diff --git a/include/net/inet_hashtables.h b/include/net/inet_hashtables.h index 6e2fe186d0dc..69891edcaf96 100644 --- a/include/net/inet_hashtables.h +++ b/include/net/inet_hashtables.h @@ -282,7 +282,7 @@ struct inet_bind_hashbucket * inet_bhash2_addr_any_hashbucket(const struct sock *sk, const struct net *net, int port); /* This should be called whenever a socket's sk_rcv_saddr (ipv4) or - * sk_v6_rcv_saddr (ipv6) changes after it has been binded. The socket's + * sk_v6_rcv_saddr (ipv6) changes after it has been bound. The socket's * rcv_saddr field should already have been updated when this is called. */ int inet_bhash2_update_saddr(struct sock *sk, void *saddr, int family); diff --git a/include/net/sock.h b/include/net/sock.h index 51185222aac2..20ee599d293e 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -2034,7 +2034,7 @@ static inline int sk_receive_skb(struct sock *sk, struct sk_buff *skb, static inline void sk_tx_queue_set(struct sock *sk, int tx_queue) { - /* sk_tx_queue_mapping accept only upto a 16-bit value */ + /* sk_tx_queue_mapping accept only up to a 16-bit value */ if (WARN_ON_ONCE((unsigned short)tx_queue >= USHRT_MAX)) return; /* Paired with READ_ONCE() in sk_tx_queue_get() and diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 1c867a302444..543ee76dfc47 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -1640,7 +1640,7 @@ struct sk_buff *tcp_recv_skb(struct sock *sk, u32 seq, u32 *off) return skb; } /* This looks weird, but this can happen if TCP collapsing - * splitted a fat GRO packet, while we released socket lock + * split a fat GRO packet, while we released socket lock * in skb_splice_bits() */ tcp_eat_recv_skb(sk, skb); diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 0f60a1dbf927..e1e0d71b2345 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -5131,7 +5131,7 @@ void tcp_sack_compress_send_ack(struct sock *sk) __sock_put(sk); /* Since we have to send one ack finally, - * substract one from tp->compressed_ack to keep + * subtract one from tp->compressed_ack to keep * LINUX_MIB_TCPACKCOMPRESSED accurate. */ NET_ADD_STATS(sock_net(sk), LINUX_MIB_TCPACKCOMPRESSED, diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index d960e3de7d50..1079862e5b4a 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -2716,7 +2716,7 @@ static int tcp_mtu_probe(struct sock *sk) interval = icsk->icsk_mtup.search_high - icsk->icsk_mtup.search_low; /* When misfortune happens, we are reprobing actively, * and then reprobe timer has expired. We stick with current - * probing process by not resetting search range to its orignal. + * probing process by not resetting search range to its original. */ if (probe_size > tcp_mtu_to_mss(sk, icsk->icsk_mtup.search_high) || interval < READ_ONCE(net->ipv4.sysctl_tcp_probe_threshold)) { diff --git a/net/ipv6/calipso.c b/net/ipv6/calipso.c index c6a34334e657..9c9817b7a4cb 100644 --- a/net/ipv6/calipso.c +++ b/net/ipv6/calipso.c @@ -43,7 +43,7 @@ #define CALIPSO_HDR_LEN (2 + 8) /* Maximum size of the calipso option including - * the two-byte TLV header and upto 3 bytes of + * the two-byte TLV header and up to 3 bytes of * leading pad and 7 bytes of trailing pad. */ #define CALIPSO_OPT_LEN_MAX_WITH_PAD (3 + CALIPSO_OPT_LEN_MAX + 7) @@ -712,7 +712,7 @@ static int calipso_pad_write(unsigned char *buf, unsigned int offset, * * Description: * Generate a CALIPSO option using the DOI definition and security attributes - * passed to the function. This also generates upto three bytes of leading + * passed to the function. This also generates up to three bytes of leading * padding that ensures that the option is 4n + 2 aligned. It returns the * number of bytes written (including any initial padding). */ diff --git a/net/llc/llc_c_ac.c b/net/llc/llc_c_ac.c index 724ecd741d4c..342902a73d1c 100644 --- a/net/llc/llc_c_ac.c +++ b/net/llc/llc_c_ac.c @@ -1392,7 +1392,7 @@ int llc_conn_disc(struct sock *sk, struct sk_buff *skb) /** * llc_conn_reset - resets connection - * @sk : reseting connection. + * @sk : resetting connection. * @skb: occurred event. * * Stop all timers, empty all queues and reset all flags. diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index e6b1d9758c9c..4f2be126b2f1 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -2317,7 +2317,7 @@ static int netlink_dump(struct sock *sk, bool lock_taken) */ skb_reserve(skb, skb_tailroom(skb) - alloc_size); - /* Make sure malicious BPF programs can not read unitialized memory + /* Make sure malicious BPF programs can not read uninitialized memory * from skb->head -> skb->data */ skb_reset_network_header(skb); diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c index 27c26e12f95d..25aa63bac2c3 100644 --- a/net/sctp/protocol.c +++ b/net/sctp/protocol.c @@ -411,7 +411,7 @@ static enum sctp_scope sctp_v4_scope(union sctp_addr *addr) } /* Returns a valid dst cache entry for the given source and destination ip - * addresses. If an association is passed, trys to get a dst entry with a + * addresses. If an association is passed, tries to get a dst entry with a * source address that matches an address in the bind address list. */ static void sctp_v4_get_dst(struct sctp_transport *t, union sctp_addr *saddr, @@ -1564,7 +1564,7 @@ static __init int sctp_init(void) } /* Allocate and initialize the SCTP port hash table. - * Note that order is initalized to start at the max sized + * Note that order is initialized to start at the max sized * table we want to support. If we can't get that many pages * reduce the order and try again */ diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c index 84a4c97d0f75..3dd387e10c45 100644 --- a/net/sctp/sm_make_chunk.c +++ b/net/sctp/sm_make_chunk.c @@ -2215,7 +2215,7 @@ static enum sctp_ierror sctp_verify_param(struct net *net, if (!ep->auth_enable) goto unhandled; - /* SCTP-AUTH: Secion 6.1 + /* SCTP-AUTH: Section 6.1 * If the random number is not 32 byte long the association * MUST be aborted. The ABORT chunk SHOULD contain the error * cause 'Protocol Violation'. @@ -2306,7 +2306,7 @@ int sctp_verify_init(struct net *net, const struct sctp_endpoint *ep, } /* There is a possibility that a parameter length was bad and - * in that case we would have stoped walking the parameters. + * in that case we would have stopped walking the parameters. * The current param.p would point at the bad one. * Current consensus on the mailing list is to generate a PROTOCOL * VIOLATION error. We build the ERROR chunk here and let the normal diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c index 0d99b7e8c082..b842dc543d63 100644 --- a/net/sctp/sm_sideeffect.c +++ b/net/sctp/sm_sideeffect.c @@ -566,7 +566,7 @@ static void sctp_do_8_2_transport_strike(struct sctp_cmd_seq *commands, * If the timer was a heartbeat, we only increment error counts * when we already have an outstanding HEARTBEAT that has not * been acknowledged. - * Additionally, some tranport states inhibit error increments. + * Additionally, some transport states inhibit error increments. */ if (!is_hb) { asoc->overall_error_count++; diff --git a/net/sctp/transport.c b/net/sctp/transport.c index 6ea55b9fbde4..c44e033f6ffb 100644 --- a/net/sctp/transport.c +++ b/net/sctp/transport.c @@ -723,7 +723,7 @@ void sctp_transport_lower_cwnd(struct sctp_transport *transport, * transport address, the cwnd of the transport address * should be adjusted to max(cwnd/2, 4*MTU) per RTO. * NOTE: Although the draft recommends that this check needs - * to be done every RTO interval, we do it every hearbeat + * to be done every RTO interval, we do it every heartbeat * interval. */ transport->cwnd = max(transport->cwnd/2, diff --git a/net/sctp/ulpqueue.c b/net/sctp/ulpqueue.c index b05daafd369a..15bf4fc34c82 100644 --- a/net/sctp/ulpqueue.c +++ b/net/sctp/ulpqueue.c @@ -933,7 +933,7 @@ static void sctp_ulpq_reap_ordered(struct sctp_ulpq *ulpq, __u16 sid) } /* Skip over an SSN. This is used during the processing of - * Forwared TSN chunk to skip over the abandoned ordered data + * Forwarded TSN chunk to skip over the abandoned ordered data */ void sctp_ulpq_skip(struct sctp_ulpq *ulpq, __u16 sid, __u16 ssn) { diff --git a/samples/pktgen/README.rst b/samples/pktgen/README.rst index f4adeed5f5f0..54e8b68d910c 100644 --- a/samples/pktgen/README.rst +++ b/samples/pktgen/README.rst @@ -12,7 +12,7 @@ by shell source'ing. Namely "functions.sh" and "parameters.sh". Common parameters ----------------- -The parameters.sh file support easy and consistant parameter parsing +The parameters.sh file support easy and consistent parameter parsing across the sample scripts. Usage example is printed on errors:: Usage: ./pktgen_sample01_simple.sh [-vx] -i ethX diff --git a/tools/testing/selftests/drivers/net/team/options.sh b/tools/testing/selftests/drivers/net/team/options.sh index 66c0cb896dad..fdfe2a2cfe10 100755 --- a/tools/testing/selftests/drivers/net/team/options.sh +++ b/tools/testing/selftests/drivers/net/team/options.sh @@ -139,7 +139,7 @@ team_test_option() log_test "Set + Get '${option_name}' test" } -# Test that getting a non-existant option fails. +# Test that getting a non-existent option fails. # Globals: # RET - Used by testing infra like `check_err`. # EXIT_STATUS - Used by `log_test` for whole script exit value. diff --git a/tools/testing/selftests/net/arp_ndisc_untracked_subnets.sh b/tools/testing/selftests/net/arp_ndisc_untracked_subnets.sh index eef5cbf6eecc..042c3a1f954c 100755 --- a/tools/testing/selftests/net/arp_ndisc_untracked_subnets.sh +++ b/tools/testing/selftests/net/arp_ndisc_untracked_subnets.sh @@ -37,7 +37,7 @@ setup() { # Set up interfaces veth0 and veth1, which are pairs in separate # namespaces. veth0 is veth-router, veth1 is veth-host. - # first, set up the inteface's link to the namespace + # first, set up the interface's link to the namespace # then, set the interface "up" ip netns exec ${ROUTER_NS} ip link add name ${ROUTER_INTF} \ type veth peer name ${HOST_INTF} @@ -71,7 +71,7 @@ setup_v6() { # Set up interfaces veth0 and veth1, which are pairs in separate # namespaces. veth0 is veth-router, veth1 is veth-host. - # first, set up the inteface's link to the namespace + # first, set up the interface's link to the namespace # then, set the interface "up" ip -n ${ROUTER_NS_V6} link add name ${ROUTER_INTF} \ type veth peer name ${HOST_INTF} netns ${HOST_NS_V6} diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index 05acd4011456..ae17be3423c0 100644 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -114,7 +114,7 @@ netif_find_driver() done } -# Whether to find netdevice according to the driver speficied by the importer +# Whether to find netdevice according to the driver specified by the importer : "${NETIF_FIND_DRIVER:=}" if [[ $NETIF_FIND_DRIVER ]]; then diff --git a/tools/testing/selftests/net/ip_defrag.c b/tools/testing/selftests/net/ip_defrag.c index f9ed749fd8c7..46630a489a03 100644 --- a/tools/testing/selftests/net/ip_defrag.c +++ b/tools/testing/selftests/net/ip_defrag.c @@ -30,7 +30,7 @@ const struct in6_addr addr6 = IN6ADDR_LOOPBACK_INIT; #define IP6_HLEN (sizeof(struct ip6_hdr)) #define UDP_HLEN (sizeof(struct udphdr)) -/* IPv6 fragment header lenth. */ +/* IPv6 fragment header length. */ #define FRAG_HLEN 8 static int payload_len;
