On Fri, 4 Sept 2026 at 13:56, Andrew Davis <[email protected]> wrote:
>
> The type of message sent using omap-mailbox is always u32. The definition
> of mbox_msg_t is uintptr_t which is wrong as that type changes based on
> the architecture (32bit vs 64bit). Make the type fixed to u32.
>
> This then means we need to fix the helper macro omap_mbox_message so it
> doesn't cast to u32 twice. What this macro should be doing is converting
> from the message type returned from the mailbox framework into the
> omap-mailbox type. When fixing this we should add a macro for the other
> direction (from omap-mailbox type to something that can be used with
> mbox_send_message).
>
> After these changes, make use of the new macros as appropriate.
>
> Signed-off-by: Andrew Davis <[email protected]>
> ---
>  drivers/remoteproc/omap_remoteproc.c | 10 +++++-----
>  drivers/remoteproc/ti_k3_common.c    | 10 ++--------
>  include/linux/omap-mailbox.h         |  5 +++--
>  3 files changed, 10 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/remoteproc/omap_remoteproc.c 
> b/drivers/remoteproc/omap_remoteproc.c
> index 6ed0f28edac9c..efff95b8e363f 100644
> --- a/drivers/remoteproc/omap_remoteproc.c
> +++ b/drivers/remoteproc/omap_remoteproc.c
> @@ -499,7 +499,7 @@ static void omap_rproc_mbox_callback(struct mbox_client 
> *client, void *data)
>                                                 client);
>         struct device *dev = oproc->rproc->dev.parent;
>         const char *name = oproc->rproc->name;
> -       u32 msg = (u32)data;
> +       mbox_msg_t msg = omap_mbox_from_message(data);
>

This patch looks familiar - was it submitted before but not merged?

I'm fine with this set but would like an RB/TB from someone else at TI
(for all 3 patches).

Thanks,
Mathieu

>         dev_dbg(dev, "mbox msg: 0x%x\n", msg);
>
> @@ -550,7 +550,7 @@ static void omap_rproc_kick(struct rproc *rproc, int vqid)
>         }
>
>         /* send the index of the triggered virtqueue in the mailbox payload */
> -       ret = mbox_send_message(oproc->mbox, (void *)vqid);
> +       ret = mbox_send_message(oproc->mbox, omap_mbox_to_message(vqid));
>         if (ret < 0)
>                 dev_err(dev, "failed to send mailbox message, status = %d\n",
>                         ret);
> @@ -628,7 +628,7 @@ static int omap_rproc_start(struct rproc *rproc)
>          * Note that the reply will _not_ arrive immediately: this message
>          * will wait in the mailbox fifo until the remote processor is booted.
>          */
> -       ret = mbox_send_message(oproc->mbox, (void *)RP_MBOX_ECHO_REQUEST);
> +       ret = mbox_send_message(oproc->mbox, 
> omap_mbox_to_message(RP_MBOX_ECHO_REQUEST));
>         if (ret < 0) {
>                 dev_err(dev, "mbox_send_message failed: %d\n", ret);
>                 goto put_mbox;
> @@ -777,13 +777,13 @@ static int _omap_rproc_suspend(struct rproc *rproc, 
> bool auto_suspend)
>         struct omap_rproc *oproc = rproc->priv;
>         unsigned long to = msecs_to_jiffies(DEF_SUSPEND_TIMEOUT);
>         unsigned long ta = jiffies + to;
> -       u32 suspend_msg = auto_suspend ?
> +       mbox_msg_t suspend_msg = auto_suspend ?
>                                 RP_MBOX_SUSPEND_AUTO : RP_MBOX_SUSPEND_SYSTEM;
>         int ret;
>
>         reinit_completion(&oproc->pm_comp);
>         oproc->suspend_acked = false;
> -       ret = mbox_send_message(oproc->mbox, (void *)suspend_msg);
> +       ret = mbox_send_message(oproc->mbox, 
> omap_mbox_to_message(suspend_msg));
>         if (ret < 0) {
>                 dev_err(dev, "PM mbox_send_message failed: %d\n", ret);
>                 return ret;
> diff --git a/drivers/remoteproc/ti_k3_common.c 
> b/drivers/remoteproc/ti_k3_common.c
> index 3cb8ae5d72f67..4b6da3363f6c2 100644
> --- a/drivers/remoteproc/ti_k3_common.c
> +++ b/drivers/remoteproc/ti_k3_common.c
> @@ -54,7 +54,7 @@ void k3_rproc_mbox_callback(struct mbox_client *client, 
> void *data)
>         struct k3_rproc *kproc = container_of(client, struct k3_rproc, 
> client);
>         struct device *dev = kproc->rproc->dev.parent;
>         struct rproc *rproc = kproc->rproc;
> -       u32 msg = (u32)(uintptr_t)(data);
> +       mbox_msg_t msg = omap_mbox_from_message(data);
>
>         dev_dbg(dev, "mbox msg: 0x%x\n", msg);
>
> @@ -94,15 +94,9 @@ void k3_rproc_kick(struct rproc *rproc, int vqid)
>  {
>         struct k3_rproc *kproc = rproc->priv;
>         struct device *dev = kproc->dev;
> -       u32 msg = (u32)vqid;
>         int ret;
>
> -       /*
> -        * Send the index of the triggered virtqueue in the mailbox payload.
> -        * NOTE: msg is cast to uintptr_t to prevent compiler warnings when
> -        * void* is 64bit. It is safely cast back to u32 in the mailbox 
> driver.
> -        */
> -       ret = mbox_send_message(kproc->mbox, (void *)(uintptr_t)msg);
> +       ret = mbox_send_message(kproc->mbox, omap_mbox_to_message(vqid));
>         if (ret < 0)
>                 dev_err(dev, "failed to send mailbox message, status = %d\n",
>                         ret);
> diff --git a/include/linux/omap-mailbox.h b/include/linux/omap-mailbox.h
> index 3cc5c4ed7f5a6..e45f8c3841c23 100644
> --- a/include/linux/omap-mailbox.h
> +++ b/include/linux/omap-mailbox.h
> @@ -6,8 +6,9 @@
>  #ifndef OMAP_MAILBOX_H
>  #define OMAP_MAILBOX_H
>
> -typedef uintptr_t mbox_msg_t;
> +typedef u32 mbox_msg_t;
>
> -#define omap_mbox_message(data) (u32)(mbox_msg_t)(data)
> +#define omap_mbox_to_message(data) ((void *)(uintptr_t)(data))
> +#define omap_mbox_from_message(data) ((mbox_msg_t)(uintptr_t)(data))
>
>  #endif /* OMAP_MAILBOX_H */
> --
> 2.39.2
>

Reply via email to