Note: Tejun's change is a feature addition, but one that is IMO
important for debugging and serious-bug workarounds. It's
self-contained and should not affect anyone not using the new parm.
Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
upstream-linus
to receive the following updates:
Documentation/kernel-parameters.txt | 35 ++++
drivers/ata/libata-core.c | 380 ++++++++++++++++++++++++++++++++++-
drivers/ata/libata-eh.c | 8 +-
drivers/ata/libata-scsi.c | 2 +-
drivers/ata/libata.h | 1 +
drivers/ata/pata_legacy.c | 44 ++--
drivers/ata/sata_mv.c | 9 +-
include/linux/libata.h | 2 +-
8 files changed, 448 insertions(+), 33 deletions(-)
Harvey Harrison (2):
ata: fix sparse warnings in pata_legacy.c
ata: fix sparse warning in libata.h
Martin Michlmayr (1):
sata_mv: Define module alias for platform device
Randy Dunlap (1):
libata: fix kernel-doc parameter warning
Saeed Bishara (2):
sata_mv: use hpriv->base instead of the host->iomap
sata_mv: remove iounmap in mv_platform_remove and use devm_iomap
Tejun Heo (1):
libata: implement libata.force module parameter
diff --git a/Documentation/kernel-parameters.txt
b/Documentation/kernel-parameters.txt
index 7278295..9a5b665 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -950,6 +950,41 @@ and is between 256 and 4096 characters. It is defined in
the file
when set.
Format: <int>
+ libata.force= [LIBATA] Force configurations. The format is comma
+ separated list of "[ID:]VAL" where ID is
+ PORT[:DEVICE]. PORT and DEVICE are decimal numbers
+ matching port, link or device. Basically, it matches
+ the ATA ID string printed on console by libata. If
+ the whole ID part is omitted, the last PORT and DEVICE
+ values are used. If ID hasn't been specified yet, the
+ configuration applies to all ports, links and devices.
+
+ If only DEVICE is omitted, the parameter applies to
+ the port and all links and devices behind it. DEVICE
+ number of 0 either selects the first device or the
+ first fan-out link behind PMP device. It does not
+ select the host link. DEVICE number of 15 selects the
+ host link and device attached to it.
+
+ The VAL specifies the configuration to force. As long
+ as there's no ambiguity shortcut notation is allowed.
+ For example, both 1.5 and 1.5G would work for 1.5Gbps.
+ The following configurations can be forced.
+
+ * Cable type: 40c, 80c, short40c, unk, ign or sata.
+ Any ID with matching PORT is used.
+
+ * SATA link speed limit: 1.5Gbps or 3.0Gbps.
+
+ * Transfer mode: pio[0-7], mwdma[0-4] and udma[0-7].
+ udma[/][16,25,33,44,66,100,133] notation is also
+ allowed.
+
+ * [no]ncq: Turn on or off NCQ.
+
+ If there are multiple matching configurations changing
+ the same attribute, the last one is used.
+
load_ramdisk= [RAM] List of ramdisks to load from floppy
See Documentation/ramdisk.txt.
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index def3682..60d1bb5 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -87,6 +87,28 @@ static struct workqueue_struct *ata_wq;
struct workqueue_struct *ata_aux_wq;
+struct ata_force_param {
+ const char *name;
+ unsigned int cbl;
+ int spd_limit;
+ unsigned long xfer_mask;
+ unsigned int horkage_on;
+ unsigned int horkage_off;
+};
+
+struct ata_force_ent {
+ int port;
+ int device;
+ struct ata_force_param param;
+};
+
+static struct ata_force_ent *ata_force_tbl;
+static int ata_force_tbl_size;
+
+static char ata_force_param_buf[PAGE_SIZE] __initdata;
+module_param_string(force, ata_force_param_buf, sizeof(ata_force_param_buf),
0444);
+MODULE_PARM_DESC(force, "Force ATA configurations including cable type, link
speed and transfer mode (see Documentation/kernel-parameters.txt for details)");
+
int atapi_enabled = 1;
module_param(atapi_enabled, int, 0444);
MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off,
1=on)");
@@ -130,6 +152,179 @@ MODULE_VERSION(DRV_VERSION);
/**
+ * ata_force_cbl - force cable type according to libata.force
+ * @link: ATA link of interest
+ *
+ * Force cable type according to libata.force and whine about it.
+ * The last entry which has matching port number is used, so it
+ * can be specified as part of device force parameters. For
+ * example, both "a:40c,1.00:udma4" and "1.00:40c,udma4" have the
+ * same effect.
+ *
+ * LOCKING:
+ * EH context.
+ */
+void ata_force_cbl(struct ata_port *ap)
+{
+ int i;
+
+ for (i = ata_force_tbl_size - 1; i >= 0; i--) {
+ const struct ata_force_ent *fe = &ata_force_tbl[i];
+
+ if (fe->port != -1 && fe->port != ap->print_id)
+ continue;
+
+ if (fe->param.cbl == ATA_CBL_NONE)
+ continue;
+
+ ap->cbl = fe->param.cbl;
+ ata_port_printk(ap, KERN_NOTICE,
+ "FORCE: cable set to %s\n", fe->param.name);
+ return;
+ }
+}
+
+/**
+ * ata_force_spd_limit - force SATA spd limit according to libata.force
+ * @link: ATA link of interest
+ *
+ * Force SATA spd limit according to libata.force and whine about
+ * it. When only the port part is specified (e.g. 1:), the limit
+ * applies to all links connected to both the host link and all
+ * fan-out ports connected via PMP. If the device part is
+ * specified as 0 (e.g. 1.00:), it specifies the first fan-out
+ * link not the host link. Device number 15 always points to the
+ * host link whether PMP is attached or not.
+ *
+ * LOCKING:
+ * EH context.
+ */
+static void ata_force_spd_limit(struct ata_link *link)
+{
+ int linkno, i;
+
+ if (ata_is_host_link(link))
+ linkno = 15;
+ else
+ linkno = link->pmp;
+
+ for (i = ata_force_tbl_size - 1; i >= 0; i--) {
+ const struct ata_force_ent *fe = &ata_force_tbl[i];
+
+ if (fe->port != -1 && fe->port != link->ap->print_id)
+ continue;
+
+ if (fe->device != -1 && fe->device != linkno)
+ continue;
+
+ if (!fe->param.spd_limit)
+ continue;
+
+ link->hw_sata_spd_limit = (1 << fe->param.spd_limit) - 1;
+ ata_link_printk(link, KERN_NOTICE,
+ "FORCE: PHY spd limit set to %s\n", fe->param.name);
+ return;
+ }
+}
+
+/**
+ * ata_force_xfermask - force xfermask according to libata.force
+ * @dev: ATA device of interest
+ *
+ * Force xfer_mask according to libata.force and whine about it.
+ * For consistency with link selection, device number 15 selects
+ * the first device connected to the host link.
+ *
+ * LOCKING:
+ * EH context.
+ */
+static void ata_force_xfermask(struct ata_device *dev)
+{
+ int devno = dev->link->pmp + dev->devno;
+ int alt_devno = devno;
+ int i;
+
+ /* allow n.15 for the first device attached to host port */
+ if (ata_is_host_link(dev->link) && devno == 0)
+ alt_devno = 15;
+
+ for (i = ata_force_tbl_size - 1; i >= 0; i--) {
+ const struct ata_force_ent *fe = &ata_force_tbl[i];
+ unsigned long pio_mask, mwdma_mask, udma_mask;
+
+ if (fe->port != -1 && fe->port != dev->link->ap->print_id)
+ continue;
+
+ if (fe->device != -1 && fe->device != devno &&
+ fe->device != alt_devno)
+ continue;
+
+ if (!fe->param.xfer_mask)
+ continue;
+
+ ata_unpack_xfermask(fe->param.xfer_mask,
+ &pio_mask, &mwdma_mask, &udma_mask);
+ if (udma_mask)
+ dev->udma_mask = udma_mask;
+ else if (mwdma_mask) {
+ dev->udma_mask = 0;
+ dev->mwdma_mask = mwdma_mask;
+ } else {
+ dev->udma_mask = 0;
+ dev->mwdma_mask = 0;
+ dev->pio_mask = pio_mask;
+ }
+
+ ata_dev_printk(dev, KERN_NOTICE,
+ "FORCE: xfer_mask set to %s\n", fe->param.name);
+ return;
+ }
+}
+
+/**
+ * ata_force_horkage - force horkage according to libata.force
+ * @dev: ATA device of interest
+ *
+ * Force horkage according to libata.force and whine about it.
+ * For consistency with link selection, device number 15 selects
+ * the first device connected to the host link.
+ *
+ * LOCKING:
+ * EH context.
+ */
+static void ata_force_horkage(struct ata_device *dev)
+{
+ int devno = dev->link->pmp + dev->devno;
+ int alt_devno = devno;
+ int i;
+
+ /* allow n.15 for the first device attached to host port */
+ if (ata_is_host_link(dev->link) && devno == 0)
+ alt_devno = 15;
+
+ for (i = 0; i < ata_force_tbl_size; i++) {
+ const struct ata_force_ent *fe = &ata_force_tbl[i];
+
+ if (fe->port != -1 && fe->port != dev->link->ap->print_id)
+ continue;
+
+ if (fe->device != -1 && fe->device != devno &&
+ fe->device != alt_devno)
+ continue;
+
+ if (!(~dev->horkage & fe->param.horkage_on) &&
+ !(dev->horkage & fe->param.horkage_off))
+ continue;
+
+ dev->horkage |= fe->param.horkage_on;
+ dev->horkage &= ~fe->param.horkage_off;
+
+ ata_dev_printk(dev, KERN_NOTICE,
+ "FORCE: horkage modified (%s)\n", fe->param.name);
+ }
+}
+
+/**
* ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure
* @tf: Taskfile to convert
* @pmp: Port multiplier port
@@ -2067,6 +2262,7 @@ int ata_dev_configure(struct ata_device *dev)
/* set horkage */
dev->horkage |= ata_dev_blacklisted(dev);
+ ata_force_horkage(dev);
/* let ACPI work its magic */
rc = ata_acpi_on_devcfg(dev);
@@ -3150,6 +3346,7 @@ int ata_do_set_mode(struct ata_link *link, struct
ata_device **r_failed_dev)
mode_mask = ATA_DMA_MASK_CFA;
ata_dev_xfermask(dev);
+ ata_force_xfermask(dev);
pio_mask = ata_pack_xfermask(dev->pio_mask, 0, 0);
dma_mask = ata_pack_xfermask(0, dev->mwdma_mask,
dev->udma_mask);
@@ -6497,7 +6694,8 @@ void ata_link_init(struct ata_port *ap, struct ata_link
*link, int pmp)
*/
int sata_link_init_spd(struct ata_link *link)
{
- u32 scontrol, spd;
+ u32 scontrol;
+ u8 spd;
int rc;
rc = sata_scr_read(link, SCR_CONTROL, &scontrol);
@@ -6508,6 +6706,8 @@ int sata_link_init_spd(struct ata_link *link)
if (spd)
link->hw_sata_spd_limit &= (1 << spd) - 1;
+ ata_force_spd_limit(link);
+
link->sata_spd_limit = link->hw_sata_spd_limit;
return 0;
@@ -7218,10 +7418,187 @@ int ata_pci_device_resume(struct pci_dev *pdev)
#endif /* CONFIG_PCI */
+static int __init ata_parse_force_one(char **cur,
+ struct ata_force_ent *force_ent,
+ const char **reason)
+{
+ /* FIXME: Currently, there's no way to tag init const data and
+ * using __initdata causes build failure on some versions of
+ * gcc. Once __initdataconst is implemented, add const to the
+ * following structure.
+ */
+ static struct ata_force_param force_tbl[] __initdata = {
+ { "40c", .cbl = ATA_CBL_PATA40 },
+ { "80c", .cbl = ATA_CBL_PATA80 },
+ { "short40c", .cbl = ATA_CBL_PATA40_SHORT },
+ { "unk", .cbl = ATA_CBL_PATA_UNK },
+ { "ign", .cbl = ATA_CBL_PATA_IGN },
+ { "sata", .cbl = ATA_CBL_SATA },
+ { "1.5Gbps", .spd_limit = 1 },
+ { "3.0Gbps", .spd_limit = 2 },
+ { "noncq", .horkage_on = ATA_HORKAGE_NONCQ },
+ { "ncq", .horkage_off = ATA_HORKAGE_NONCQ },
+ { "pio0", .xfer_mask = 1 << (ATA_SHIFT_PIO + 0) },
+ { "pio1", .xfer_mask = 1 << (ATA_SHIFT_PIO + 1) },
+ { "pio2", .xfer_mask = 1 << (ATA_SHIFT_PIO + 2) },
+ { "pio3", .xfer_mask = 1 << (ATA_SHIFT_PIO + 3) },
+ { "pio4", .xfer_mask = 1 << (ATA_SHIFT_PIO + 4) },
+ { "pio5", .xfer_mask = 1 << (ATA_SHIFT_PIO + 5) },
+ { "pio6", .xfer_mask = 1 << (ATA_SHIFT_PIO + 6) },
+ { "mwdma0", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 0) },
+ { "mwdma1", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 1) },
+ { "mwdma2", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 2) },
+ { "mwdma3", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 3) },
+ { "mwdma4", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 4) },
+ { "udma0", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 0) },
+ { "udma16", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 0) },
+ { "udma/16", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 0) },
+ { "udma1", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 1) },
+ { "udma25", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 1) },
+ { "udma/25", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 1) },
+ { "udma2", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 2) },
+ { "udma33", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 2) },
+ { "udma/33", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 2) },
+ { "udma3", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 3) },
+ { "udma44", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 3) },
+ { "udma/44", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 3) },
+ { "udma4", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 4) },
+ { "udma66", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 4) },
+ { "udma/66", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 4) },
+ { "udma5", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 5) },
+ { "udma100", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 5) },
+ { "udma/100", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 5) },
+ { "udma6", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 6) },
+ { "udma133", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 6) },
+ { "udma/133", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 6) },
+ { "udma7", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 7) },
+ };
+ char *start = *cur, *p = *cur;
+ char *id, *val, *endp;
+ const struct ata_force_param *match_fp = NULL;
+ int nr_matches = 0, i;
+
+ /* find where this param ends and update *cur */
+ while (*p != '\0' && *p != ',')
+ p++;
+
+ if (*p == '\0')
+ *cur = p;
+ else
+ *cur = p + 1;
+
+ *p = '\0';
+
+ /* parse */
+ p = strchr(start, ':');
+ if (!p) {
+ val = strstrip(start);
+ goto parse_val;
+ }
+ *p = '\0';
+
+ id = strstrip(start);
+ val = strstrip(p + 1);
+
+ /* parse id */
+ p = strchr(id, '.');
+ if (p) {
+ *p++ = '\0';
+ force_ent->device = simple_strtoul(p, &endp, 10);
+ if (p == endp || *endp != '\0') {
+ *reason = "invalid device";
+ return -EINVAL;
+ }
+ }
+
+ force_ent->port = simple_strtoul(id, &endp, 10);
+ if (p == endp || *endp != '\0') {
+ *reason = "invalid port/link";
+ return -EINVAL;
+ }
+
+ parse_val:
+ /* parse val, allow shortcuts so that both 1.5 and 1.5Gbps work */
+ for (i = 0; i < ARRAY_SIZE(force_tbl); i++) {
+ const struct ata_force_param *fp = &force_tbl[i];
+
+ if (strncasecmp(val, fp->name, strlen(val)))
+ continue;
+
+ nr_matches++;
+ match_fp = fp;
+
+ if (strcasecmp(val, fp->name) == 0) {
+ nr_matches = 1;
+ break;
+ }
+ }
+
+ if (!nr_matches) {
+ *reason = "unknown value";
+ return -EINVAL;
+ }
+ if (nr_matches > 1) {
+ *reason = "ambigious value";
+ return -EINVAL;
+ }
+
+ force_ent->param = *match_fp;
+
+ return 0;
+}
+
+static void __init ata_parse_force_param(void)
+{
+ int idx = 0, size = 1;
+ int last_port = -1, last_device = -1;
+ char *p, *cur, *next;
+
+ /* calculate maximum number of params and allocate force_tbl */
+ for (p = ata_force_param_buf; *p; p++)
+ if (*p == ',')
+ size++;
+
+ ata_force_tbl = kzalloc(sizeof(ata_force_tbl[0]) * size, GFP_KERNEL);
+ if (!ata_force_tbl) {
+ printk(KERN_WARNING "ata: failed to extend force table, "
+ "libata.force ignored\n");
+ return;
+ }
+
+ /* parse and populate the table */
+ for (cur = ata_force_param_buf; *cur != '\0'; cur = next) {
+ const char *reason = "";
+ struct ata_force_ent te = { .port = -1, .device = -1 };
+
+ next = cur;
+ if (ata_parse_force_one(&next, &te, &reason)) {
+ printk(KERN_WARNING "ata: failed to parse force "
+ "parameter \"%s\" (%s)\n",
+ cur, reason);
+ continue;
+ }
+
+ if (te.port == -1) {
+ te.port = last_port;
+ te.device = last_device;
+ }
+
+ ata_force_tbl[idx++] = te;
+
+ last_port = te.port;
+ last_device = te.device;
+ }
+
+ ata_force_tbl_size = idx;
+}
static int __init ata_init(void)
{
ata_probe_timeout *= HZ;
+
+ ata_parse_force_param();
+
ata_wq = create_workqueue("ata");
if (!ata_wq)
return -ENOMEM;
@@ -7238,6 +7615,7 @@ static int __init ata_init(void)
static void __exit ata_exit(void)
{
+ kfree(ata_force_tbl);
destroy_workqueue(ata_wq);
destroy_workqueue(ata_aux_wq);
}
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 4e31071..698ce2c 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2393,9 +2393,11 @@ static int ata_eh_revalidate_and_attach(struct ata_link
*link,
}
/* PDIAG- should have been released, ask cable type if post-reset */
- if (ata_is_host_link(link) && ap->ops->cable_detect &&
- (ehc->i.flags & ATA_EHI_DID_RESET))
- ap->cbl = ap->ops->cable_detect(ap);
+ if ((ehc->i.flags & ATA_EHI_DID_RESET) && ata_is_host_link(link)) {
+ if (ap->ops->cable_detect)
+ ap->cbl = ap->ops->cable_detect(ap);
+ ata_force_cbl(ap);
+ }
/* Configure new devices forward such that user doesn't see
* device detection messages backwards.
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index dd41b1a..f888bab 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -828,7 +828,7 @@ static void ata_scsi_sdev_config(struct scsi_device *sdev)
/**
* atapi_drain_needed - Check whether data transfer may overflow
- * @request: request to be checked
+ * @rq: request to be checked
*
* ATAPI commands which transfer variable length data to host
* might overflow due to application error or hardare bug. This
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 409ffb9..6036ded 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -61,6 +61,7 @@ extern int atapi_passthru16;
extern int libata_fua;
extern int libata_noacpi;
extern int libata_allow_tpm;
+extern void ata_force_cbl(struct ata_port *ap);
extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev);
extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
u64 block, u32 n_block, unsigned int tf_flags,
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index d2177f7..50fe08e 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -774,14 +774,14 @@ static struct ata_port_operations opti82c46x_port_ops = {
static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
struct ata_timing t;
- struct legacy_data *qdi = ap->host->private_data;
+ struct legacy_data *ld_qdi = ap->host->private_data;
int active, recovery;
u8 timing;
/* Get the timing data in cycles */
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
- if (qdi->fast) {
+ if (ld_qdi->fast) {
active = 8 - FIT(t.active, 1, 8);
recovery = 18 - FIT(t.recover, 3, 18);
} else {
@@ -790,9 +790,9 @@ static void qdi6500_set_piomode(struct ata_port *ap, struct
ata_device *adev)
}
timing = (recovery << 4) | active | 0x08;
- qdi->clock[adev->devno] = timing;
+ ld_qdi->clock[adev->devno] = timing;
- outb(timing, qdi->timing);
+ outb(timing, ld_qdi->timing);
}
/**
@@ -808,14 +808,14 @@ static void qdi6500_set_piomode(struct ata_port *ap,
struct ata_device *adev)
static void qdi6580dp_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
struct ata_timing t;
- struct legacy_data *qdi = ap->host->private_data;
+ struct legacy_data *ld_qdi = ap->host->private_data;
int active, recovery;
u8 timing;
/* Get the timing data in cycles */
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
- if (qdi->fast) {
+ if (ld_qdi->fast) {
active = 8 - FIT(t.active, 1, 8);
recovery = 18 - FIT(t.recover, 3, 18);
} else {
@@ -824,12 +824,12 @@ static void qdi6580dp_set_piomode(struct ata_port *ap,
struct ata_device *adev)
}
timing = (recovery << 4) | active | 0x08;
- qdi->clock[adev->devno] = timing;
+ ld_qdi->clock[adev->devno] = timing;
- outb(timing, qdi->timing + 2 * ap->port_no);
+ outb(timing, ld_qdi->timing + 2 * ap->port_no);
/* Clear the FIFO */
if (adev->class != ATA_DEV_ATA)
- outb(0x5F, qdi->timing + 3);
+ outb(0x5F, ld_qdi->timing + 3);
}
/**
@@ -845,14 +845,14 @@ static void qdi6580dp_set_piomode(struct ata_port *ap,
struct ata_device *adev)
static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
struct ata_timing t;
- struct legacy_data *qdi = ap->host->private_data;
+ struct legacy_data *ld_qdi = ap->host->private_data;
int active, recovery;
u8 timing;
/* Get the timing data in cycles */
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
- if (qdi->fast) {
+ if (ld_qdi->fast) {
active = 8 - FIT(t.active, 1, 8);
recovery = 18 - FIT(t.recover, 3, 18);
} else {
@@ -860,11 +860,11 @@ static void qdi6580_set_piomode(struct ata_port *ap,
struct ata_device *adev)
recovery = 15 - FIT(t.recover, 0, 15);
}
timing = (recovery << 4) | active | 0x08;
- qdi->clock[adev->devno] = timing;
- outb(timing, qdi->timing + 2 * adev->devno);
+ ld_qdi->clock[adev->devno] = timing;
+ outb(timing, ld_qdi->timing + 2 * adev->devno);
/* Clear the FIFO */
if (adev->class != ATA_DEV_ATA)
- outb(0x5F, qdi->timing + 3);
+ outb(0x5F, ld_qdi->timing + 3);
}
/**
@@ -879,12 +879,12 @@ static unsigned int qdi_qc_issue_prot(struct
ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
- struct legacy_data *qdi = ap->host->private_data;
+ struct legacy_data *ld_qdi = ap->host->private_data;
- if (qdi->clock[adev->devno] != qdi->last) {
+ if (ld_qdi->clock[adev->devno] != ld_qdi->last) {
if (adev->pio_mode) {
- qdi->last = qdi->clock[adev->devno];
- outb(qdi->clock[adev->devno], qdi->timing +
+ ld_qdi->last = ld_qdi->clock[adev->devno];
+ outb(ld_qdi->clock[adev->devno], ld_qdi->timing +
2 * ap->port_no);
}
}
@@ -1037,12 +1037,12 @@ static u8 winbond_readcfg(unsigned long port, u8 reg)
static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
struct ata_timing t;
- struct legacy_data *winbond = ap->host->private_data;
+ struct legacy_data *ld_winbond = ap->host->private_data;
int active, recovery;
u8 reg;
int timing = 0x88 + (ap->port_no * 4) + (adev->devno * 2);
- reg = winbond_readcfg(winbond->timing, 0x81);
+ reg = winbond_readcfg(ld_winbond->timing, 0x81);
/* Get the timing data in cycles */
if (reg & 0x40) /* Fast VLB bus, assume 50MHz */
@@ -1053,7 +1053,7 @@ static void winbond_set_piomode(struct ata_port *ap,
struct ata_device *adev)
active = (FIT(t.active, 3, 17) - 1) & 0x0F;
recovery = (FIT(t.recover, 1, 15) + 1) & 0x0F;
timing = (active << 4) | recovery;
- winbond_writecfg(winbond->timing, timing, reg);
+ winbond_writecfg(ld_winbond->timing, timing, reg);
/* Load the setup timing */
@@ -1063,7 +1063,7 @@ static void winbond_set_piomode(struct ata_port *ap,
struct ata_device *adev)
if (!ata_pio_need_iordy(adev))
reg |= 0x02; /* IORDY off */
reg |= (FIT(t.setup, 0, 3) << 6);
- winbond_writecfg(winbond->timing, timing + 1, reg);
+ winbond_writecfg(ld_winbond->timing, timing + 1, reg);
}
static int winbond_port(struct platform_device *dev,
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 1c1fbf3..6ebebde 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -870,7 +870,7 @@ static void mv_start_dma(struct ata_port *ap, void __iomem
*port_mmio,
struct mv_host_priv *hpriv = ap->host->private_data;
int hard_port = mv_hardport_from_port(ap->port_no);
void __iomem *hc_mmio = mv_hc_base_from_port(
- ap->host->iomap[MV_PRIMARY_BAR], hard_port);
+ mv_host_base(ap->host), hard_port);
u32 hc_irq_cause, ipending;
/* clear EDMA event indicators, if any */
@@ -2947,7 +2947,8 @@ static int mv_platform_probe(struct platform_device *pdev)
hpriv->n_ports = n_ports;
host->iomap = NULL;
- hpriv->base = ioremap(res->start, res->end - res->start + 1);
+ hpriv->base = devm_ioremap(&pdev->dev, res->start,
+ res->end - res->start + 1);
hpriv->base -= MV_SATAHC0_REG_BASE;
rc = mv_create_dma_pools(hpriv, &pdev->dev);
@@ -2979,11 +2980,8 @@ static int __devexit mv_platform_remove(struct
platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct ata_host *host = dev_get_drvdata(dev);
- struct mv_host_priv *hpriv = host->private_data;
- void __iomem *base = hpriv->base;
ata_host_detach(host);
- iounmap(base);
return 0;
}
@@ -3194,6 +3192,7 @@ MODULE_DESCRIPTION("SCSI low-level driver for Marvell
SATA controllers");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, mv_pci_tbl);
MODULE_VERSION(DRV_VERSION);
+MODULE_ALIAS("platform:sata_mv");
#ifdef CONFIG_PCI
module_param(msi, int, 0444);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 2e098f9..ce7603a 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1197,7 +1197,7 @@ static inline struct ata_link *ata_port_next_link(struct
ata_link *link)
return ap->pmp_link;
}
- if (++link - ap->pmp_link < ap->nr_pmp_links)
+ if (++link < ap->nr_pmp_links + ap->pmp_link)
return link;
return NULL;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
