This patch adds the ARCH=arm specific a kgdb backend, originally
written by Deepak Saxena <[EMAIL PROTECTED]> and George Davis
<[EMAIL PROTECTED]>. Geoff Levand <[EMAIL PROTECTED]>,
Nicolas Pitre, and Manish Lachwani have contributed various fixups
here as well.
The changes to setup the traps earlier allow for early debugging with
a uart based KGDB I/O driver. The do_undefinstr() routine also needed
to allow the lookup of kernel address space in order for the debugger
to plant undefined instructions in kernel memory space and receive the
correct notification.
Signed-off-by: Jason Wessel <[EMAIL PROTECTED]>
---
arch/arm/Kconfig | 1 +
arch/arm/kernel/Makefile | 1 +
arch/arm/kernel/kgdb.c | 219 ++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/kernel/setup.c | 5 +
arch/arm/kernel/traps.c | 11 +++
include/asm-arm/kgdb.h | 101 +++++++++++++++++++++
include/asm-arm/traps.h | 2 +
7 files changed, 340 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/kernel/kgdb.c
create mode 100644 include/asm-arm/kgdb.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9619c43..9e2e631 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -11,6 +11,7 @@ config ARM
select RTC_LIB
select SYS_SUPPORTS_APM_EMULATION
select HAVE_OPROFILE
+ select HAVE_ARCH_KGDB
select HAVE_KPROBES if (!XIP_KERNEL)
help
The ARM series is a line of low-power-consumption RISC chip designs
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 00d44c6..9bb17e6 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_KEXEC) += machine_kexec.o
relocate_kernel.o
obj-$(CONFIG_KPROBES) += kprobes.o kprobes-decode.o
obj-$(CONFIG_ATAGS_PROC) += atags.o
obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o
+obj-$(CONFIG_KGDB) += kgdb.o
obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o
AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312
diff --git a/arch/arm/kernel/kgdb.c b/arch/arm/kernel/kgdb.c
new file mode 100644
index 0000000..4f5b297
--- /dev/null
+++ b/arch/arm/kernel/kgdb.c
@@ -0,0 +1,219 @@
+/*
+ * arch/arm/kernel/kgdb.c
+ *
+ * ARM KGDB support
+ *
+ * Copyright (c) 2002-2004 MontaVista Software, Inc
+ * Copyright (c) 2008 Wind River Systems, Inc.
+ *
+ * Authors: George Davis <[EMAIL PROTECTED]>
+ * Deepak Saxena <[EMAIL PROTECTED]>
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/spinlock.h>
+#include <linux/personality.h>
+#include <linux/ptrace.h>
+#include <linux/elf.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/kgdb.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/unistd.h>
+
+#include <asm/atomic.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/traps.h>
+
+/* Make a local copy of the registers passed into the handler (bletch) */
+void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs)
+{
+ int regno;
+
+ /* Initialize all to zero. */
+ for (regno = 0; regno < GDB_MAX_REGS; regno++)
+ gdb_regs[regno] = 0;
+
+ gdb_regs[_R0] = kernel_regs->ARM_r0;
+ gdb_regs[_R1] = kernel_regs->ARM_r1;
+ gdb_regs[_R2] = kernel_regs->ARM_r2;
+ gdb_regs[_R3] = kernel_regs->ARM_r3;
+ gdb_regs[_R4] = kernel_regs->ARM_r4;
+ gdb_regs[_R5] = kernel_regs->ARM_r5;
+ gdb_regs[_R6] = kernel_regs->ARM_r6;
+ gdb_regs[_R7] = kernel_regs->ARM_r7;
+ gdb_regs[_R8] = kernel_regs->ARM_r8;
+ gdb_regs[_R9] = kernel_regs->ARM_r9;
+ gdb_regs[_R10] = kernel_regs->ARM_r10;
+ gdb_regs[_FP] = kernel_regs->ARM_fp;
+ gdb_regs[_IP] = kernel_regs->ARM_ip;
+ gdb_regs[_SPT] = kernel_regs->ARM_sp;
+ gdb_regs[_LR] = kernel_regs->ARM_lr;
+ gdb_regs[_PC] = kernel_regs->ARM_pc;
+ gdb_regs[_CPSR] = kernel_regs->ARM_cpsr;
+}
+
+/* Copy local gdb registers back to kgdb regs, for later copy to kernel */
+void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs)
+{
+ kernel_regs->ARM_r0 = gdb_regs[_R0];
+ kernel_regs->ARM_r1 = gdb_regs[_R1];
+ kernel_regs->ARM_r2 = gdb_regs[_R2];
+ kernel_regs->ARM_r3 = gdb_regs[_R3];
+ kernel_regs->ARM_r4 = gdb_regs[_R4];
+ kernel_regs->ARM_r5 = gdb_regs[_R5];
+ kernel_regs->ARM_r6 = gdb_regs[_R6];
+ kernel_regs->ARM_r7 = gdb_regs[_R7];
+ kernel_regs->ARM_r8 = gdb_regs[_R8];
+ kernel_regs->ARM_r9 = gdb_regs[_R9];
+ kernel_regs->ARM_r10 = gdb_regs[_R10];
+ kernel_regs->ARM_fp = gdb_regs[_FP];
+ kernel_regs->ARM_ip = gdb_regs[_IP];
+ kernel_regs->ARM_sp = gdb_regs[_SPT];
+ kernel_regs->ARM_lr = gdb_regs[_LR];
+ kernel_regs->ARM_pc = gdb_regs[_PC];
+ kernel_regs->ARM_cpsr = gdb_regs[_CPSR];
+}
+
+void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs,
+ struct task_struct *task)
+{
+ int regno;
+ struct pt_regs *thread_regs;
+
+ /* Just making sure... */
+ if (task == NULL)
+ return;
+
+ /* Initialize to zero */
+ for (regno = 0; regno < GDB_MAX_REGS; regno++)
+ gdb_regs[regno] = 0;
+
+ /* Otherwise, we have only some registers from switch_to() */
+ thread_regs = task_pt_regs(task);
+ gdb_regs[_R0] = thread_regs->ARM_r0;
+ gdb_regs[_R1] = thread_regs->ARM_r1;
+ gdb_regs[_R2] = thread_regs->ARM_r2;
+ gdb_regs[_R3] = thread_regs->ARM_r3;
+ gdb_regs[_R4] = thread_regs->ARM_r4;
+ gdb_regs[_R5] = thread_regs->ARM_r5;
+ gdb_regs[_R6] = thread_regs->ARM_r6;
+ gdb_regs[_R7] = thread_regs->ARM_r7;
+ gdb_regs[_R8] = thread_regs->ARM_r8;
+ gdb_regs[_R9] = thread_regs->ARM_r9;
+ gdb_regs[_R10] = thread_regs->ARM_r10;
+ gdb_regs[_FP] = thread_regs->ARM_fp;
+ gdb_regs[_IP] = thread_regs->ARM_ip;
+ gdb_regs[_SPT] = thread_regs->ARM_sp;
+ gdb_regs[_LR] = thread_regs->ARM_lr;
+ gdb_regs[_PC] = thread_regs->ARM_pc;
+ gdb_regs[_CPSR] = thread_regs->ARM_cpsr;
+}
+
+static int compiled_break;
+
+int kgdb_arch_handle_exception(int exception_vector, int signo,
+ int err_code, char *remcom_in_buffer,
+ char *remcom_out_buffer,
+ struct pt_regs *linux_regs)
+{
+ long addr;
+ char *ptr;
+
+ switch (remcom_in_buffer[0]) {
+ case 'D':
+ case 'k':
+ case 'c':
+ kgdb_contthread = NULL;
+
+ /*
+ * Try to read optional parameter, pc unchanged if no parm.
+ * If this was a compiled breakpoint, we need to move
+ * to the next instruction or we will just breakpoint
+ * over and over again.
+ */
+ ptr = &remcom_in_buffer[1];
+ if (kgdb_hex2long(&ptr, &addr))
+ linux_regs->ARM_pc = addr;
+ else if (compiled_break == 1)
+ linux_regs->ARM_pc += 4;
+
+ compiled_break = 0;
+
+ return 0;
+ }
+
+ return -1;
+}
+
+static int kgdb_brk_fn(struct pt_regs *regs, unsigned int instr)
+{
+ kgdb_handle_exception(1, SIGTRAP, 0, regs);
+
+ return 0;
+}
+
+static int kgdb_compiled_brk_fn(struct pt_regs *regs, unsigned int instr)
+{
+ compiled_break = 1;
+ kgdb_handle_exception(1, SIGTRAP, 0, regs);
+
+ return 0;
+}
+
+static struct undef_hook kgdb_brkpt_hook = {
+ .instr_mask = 0xffffffff,
+ .instr_val = KGDB_BREAKINST,
+ .fn = kgdb_brk_fn
+};
+
+static struct undef_hook kgdb_compiled_brkpt_hook = {
+ .instr_mask = 0xffffffff,
+ .instr_val = KGDB_COMPILED_BREAK,
+ .fn = kgdb_compiled_brk_fn
+};
+
+/**
+ * kgdb_arch_init - Perform any architecture specific initalization.
+ *
+ * This function will handle the initalization of any architecture
+ * specific callbacks.
+ */
+int kgdb_arch_init(void)
+{
+ register_undef_hook(&kgdb_brkpt_hook);
+ register_undef_hook(&kgdb_compiled_brkpt_hook);
+
+ return 0;
+}
+
+/**
+ * kgdb_arch_exit - Perform any architecture specific uninitalization.
+ *
+ * This function will handle the uninitalization of any architecture
+ * specific callbacks, for dynamic registration and unregistration.
+ */
+void kgdb_arch_exit(void)
+{
+ unregister_undef_hook(&kgdb_brkpt_hook);
+ unregister_undef_hook(&kgdb_compiled_brkpt_hook);
+}
+/*
+ * Register our undef instruction hooks with ARM undef core.
+ * We regsiter a hook specifically looking for the KGB break inst
+ * and we handle the normal undef case within the do_undefinstr
+ * handler.
+ */
+
+struct kgdb_arch arch_kgdb_ops = {
+#ifndef __ARMEB__
+ .gdb_bpt_instr = {0xfe, 0xde, 0xff, 0xe7}
+#else /* ! __ARMEB__ */
+ .gdb_bpt_instr = {0xe7, 0xff, 0xde, 0xfe}
+#endif
+};
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index b7b0720..3385cb5 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -36,6 +36,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
+#include <asm/traps.h>
#include "compat.h"
#include "atags.h"
@@ -853,6 +854,10 @@ void __init setup_arch(char **cmdline_p)
conswitchp = &dummy_con;
#endif
#endif
+
+#if defined(CONFIG_KGDB)
+ early_trap_init();
+#endif
}
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 5595fdd..829aeae 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -294,6 +294,7 @@ asmlinkage void __exception do_undefinstr(struct pt_regs
*regs)
unsigned int instr;
struct undef_hook *hook;
siginfo_t info;
+ mm_segment_t fs;
void __user *pc;
unsigned long flags;
@@ -304,6 +305,8 @@ asmlinkage void __exception do_undefinstr(struct pt_regs
*regs)
*/
regs->ARM_pc -= correction;
+ fs = get_fs();
+ set_fs(KERNEL_DS);
pc = (void __user *)instruction_pointer(regs);
if (processor_mode(regs) == SVC_MODE) {
@@ -313,6 +316,7 @@ asmlinkage void __exception do_undefinstr(struct pt_regs
*regs)
} else {
get_user(instr, (u32 __user *)pc);
}
+ set_fs(fs);
#ifdef CONFIG_KPROBES
/*
@@ -708,6 +712,13 @@ EXPORT_SYMBOL(abort);
void __init trap_init(void)
{
+#if defined(CONFIG_KGDB)
+ return;
+}
+
+void __init early_trap_init(void)
+{
+#endif
unsigned long vectors = CONFIG_VECTORS_BASE;
extern char __stubs_start[], __stubs_end[];
extern char __vectors_start[], __vectors_end[];
diff --git a/include/asm-arm/kgdb.h b/include/asm-arm/kgdb.h
new file mode 100644
index 0000000..75efab5
--- /dev/null
+++ b/include/asm-arm/kgdb.h
@@ -0,0 +1,101 @@
+/*
+ * ARM KGDB support
+ *
+ * Author: Deepak Saxena <[EMAIL PROTECTED]>
+ *
+ * Copyright (C) 2002 MontaVista Software Inc.
+ *
+ */
+
+#ifndef __ARM_KGDB_H__
+#define __ARM_KGDB_H__
+
+#include <linux/ptrace.h>
+
+/*
+ * GDB assumes that we're a user process being debugged, so
+ * it will send us an SWI command to write into memory as the
+ * debug trap. When an SWI occurs, the next instruction addr is
+ * placed into R14_svc before jumping to the vector trap.
+ * This doesn't work for kernel debugging as we are already in SVC
+ * we would loose the kernel's LR, which is a bad thing. This
+ * is bad thing.
+ *
+ * By doing this as an undefined instruction trap, we force a mode
+ * switch from SVC to UND mode, allowing us to save full kernel state.
+ *
+ * We also define a KGDB_COMPILED_BREAK which can be used to compile
+ * in breakpoints. This is important for things like sysrq-G and for
+ * the initial breakpoint from trap_init().
+ *
+ * Note to ARM HW designers: Add real trap support like SH && PPC to
+ * make our lives much much simpler. :)
+ */
+#define BREAK_INSTR_SIZE 4
+#define GDB_BREAKINST 0xef9f0001
+#define KGDB_BREAKINST 0xe7ffdefe
+#define KGDB_COMPILED_BREAK 0xe7ffdeff
+#define CACHE_FLUSH_IS_SAFE 1
+
+#ifndef __ASSEMBLY__
+
+static inline void arch_kgdb_breakpoint(void)
+{
+ asm(".word 0xe7ffdeff");
+}
+
+extern void kgdb_handle_bus_error(void);
+extern int kgdb_fault_expected;
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * From Kevin Hilman:
+ *
+ * gdb is expecting the following registers layout.
+ *
+ * r0-r15: 1 long word each
+ * f0-f7: unused, 3 long words each !!
+ * fps: unused, 1 long word
+ * cpsr: 1 long word
+ *
+ * Even though f0-f7 and fps are not used, they need to be
+ * present in the registers sent for correct processing in
+ * the host-side gdb.
+ *
+ * In particular, it is crucial that CPSR is in the right place,
+ * otherwise gdb will not be able to correctly interpret stepping over
+ * conditional branches.
+ */
+#define _GP_REGS 16
+#define _FP_REGS 8
+#define _EXTRA_REGS 2
+#define GDB_MAX_REGS (_GP_REGS + (_FP_REGS * 3) + _EXTRA_REGS)
+
+#define KGDB_MAX_NO_CPUS 1
+#define BUFMAX 400
+#define NUMREGBYTES (GDB_MAX_REGS << 2)
+#define NUMCRITREGBYTES (32 << 2)
+
+#define _R0 0
+#define _R1 1
+#define _R2 2
+#define _R3 3
+#define _R4 4
+#define _R5 5
+#define _R6 6
+#define _R7 7
+#define _R8 8
+#define _R9 9
+#define _R10 10
+#define _FP 11
+#define _IP 12
+#define _SPT 13
+#define _LR 14
+#define _PC 15
+#define _CPSR (GDB_MAX_REGS - 1)
+
+/* So that we can denote the end of a frame for tracing, in the simple
+ * case. */
+#define CFI_END_FRAME(func) __CFI_END_FRAME(_PC, _SPT, func)
+
+#endif /* __ASM_KGDB_H__ */
diff --git a/include/asm-arm/traps.h b/include/asm-arm/traps.h
index f1541af..aa399ae 100644
--- a/include/asm-arm/traps.h
+++ b/include/asm-arm/traps.h
@@ -24,4 +24,6 @@ static inline int in_exception_text(unsigned long ptr)
ptr < (unsigned long)&__exception_text_end;
}
+extern void __init early_trap_init(void);
+
#endif
--
1.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
