Make the code more readable, remap the base address directly. Describe
module parameters.
Signed-off-by: Jiri Slaby <[EMAIL PROTECTED]>
Tested-by: Oyvind Aabling <[EMAIL PROTECTED]>
---
drivers/char/moxa.c | 64 ++++++++++++++++++++++++++------------------------
1 files changed, 33 insertions(+), 31 deletions(-)
diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c
index 7f4d1ec..2701f7c 100644
--- a/drivers/char/moxa.c
+++ b/drivers/char/moxa.c
@@ -95,7 +95,6 @@ MODULE_DEVICE_TABLE(pci, moxa_pcibrds);
static struct moxa_board_conf {
int boardType;
int numPorts;
- unsigned long baseAddr;
int busType;
int loadstat;
@@ -159,18 +158,21 @@ struct moxa_port {
static int ttymajor = MOXAMAJOR;
/* Variables for insmod */
#ifdef MODULE
-static int baseaddr[4];
-static int type[4];
-static int numports[4];
+static unsigned long baseaddr[MAX_BOARDS];
+static unsigned int type[MAX_BOARDS];
+static unsigned int numports[MAX_BOARDS];
#endif
MODULE_AUTHOR("William Chen");
MODULE_DESCRIPTION("MOXA Intellio Family Multiport Board Device Driver");
MODULE_LICENSE("GPL");
#ifdef MODULE
-module_param_array(type, int, NULL, 0);
-module_param_array(baseaddr, int, NULL, 0);
-module_param_array(numports, int, NULL, 0);
+module_param_array(type, uint, NULL, 0);
+MODULE_PARM_DESC(type, "card type: C218=2, C320=4");
+module_param_array(baseaddr, ulong, NULL, 0);
+MODULE_PARM_DESC(baseaddr, "base address");
+module_param_array(numports, uint, NULL, 0);
+MODULE_PARM_DESC(numports, "numports (ignored for C218)");
#endif
module_param(ttymajor, int, 0);
@@ -335,8 +337,9 @@ static struct pci_driver moxa_pci_driver = {
static int __init moxa_init(void)
{
- int i, numBoards = 0, retval = 0;
struct moxa_port *ch;
+ unsigned int i, isabrds = 0;
+ int retval = 0;
printk(KERN_INFO "MOXA Intellio family driver version %s\n",
MOXA_VERSION);
@@ -380,46 +383,45 @@ static int __init moxa_init(void)
mod_timer(&moxaTimer, jiffies + HZ / 50);
- /* Find the boards defined form module args. */
+ /* Find the boards defined from module args. */
#ifdef MODULE
+ {
+ struct moxa_board_conf *brd = moxa_boards;
for (i = 0; i < MAX_BOARDS; i++) {
- if ((type[i] == MOXA_BOARD_C218_ISA) ||
- (type[i] == MOXA_BOARD_C320_ISA)) {
+ if (!baseaddr[i])
+ break;
+ if (type[i] == MOXA_BOARD_C218_ISA ||
+ type[i] == MOXA_BOARD_C320_ISA) {
pr_debug("Moxa board %2d: %s board(baseAddr=%lx)\n",
- numBoards + 1, moxa_brdname[type[i] - 1],
- (unsigned long)baseaddr[i]);
- if (numBoards >= MAX_BOARDS) {
- printk(KERN_WARNING "More than %d MOXA "
- "Intellio family boards found. Board "
- "is ignored.\n", MAX_BOARDS);
+ isabrds + 1, moxa_brdname[type[i] - 1],
+ baseaddr[i]);
+ brd->boardType = type[i];
+ brd->numPorts = type[i] == MOXA_BOARD_C218_ISA ? 8 :
+ numports[i];
+ brd->busType = MOXA_BUS_TYPE_ISA;
+ brd->basemem = ioremap(baseaddr[i], 0x4000);
+ if (!brd->basemem) {
+ printk(KERN_ERR "moxa: can't remap %lx\n",
+ baseaddr[i]);
continue;
}
- moxa_boards[numBoards].boardType = type[i];
- if (type[i] == MOXA_BOARD_C218_ISA)
- moxa_boards[numBoards].numPorts = 8;
- else
- moxa_boards[numBoards].numPorts = numports[i];
- moxa_boards[numBoards].busType = MOXA_BUS_TYPE_ISA;
- moxa_boards[numBoards].baseAddr = baseaddr[i];
- numBoards++;
+
+ brd++;
+ isabrds++;
}
}
+ }
#endif
#ifdef CONFIG_PCI
retval = pci_register_driver(&moxa_pci_driver);
if (retval) {
printk(KERN_ERR "Can't register moxa pci driver!\n");
- if (numBoards)
+ if (isabrds)
retval = 0;
}
#endif
- for (i = 0; i < numBoards; i++) {
- moxa_boards[i].basemem = ioremap(moxa_boards[i].baseAddr,
- 0x4000);
- }
-
return retval;
}
--
1.5.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
