Dear All, I need help with following problem. We use kernel 2.4.32 , Motherboard is Tyan k8SE which uses Nvidia Nforce 2200 (CK8-04) chips, we have 2 Dualcore opterons and 4G ram , and SATA disk WD1600YS-01S . Sometimes (once a 3-4 weeks) the computer stops responding with following message:
ata1: command 0x35 timeout, stat 0xd0 host_stat 0x21 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata1: status=0xd0 { Busy } SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 8000002 Current sd08:03: sense key Aborted Command Additional sense indicates Scsi parity error I/O error: dev 08:03, sector 5367736 ATA: abnormal status 0xD0 on port 0x1447 ATA: abnormal status 0xD0 on port 0x1447 ATA: abnormal status 0xD0 on port 0x1447 Here is similar error reported in 2.6. - http://readlist.com/lists/vger.kernel.org/linux-kernel/30/154602.html But although we have a recent sata_nv code, it still does not work... Unfortunately we can not upgrade to 2.6 now. Do you know how I reproduce and fix this problem reliably? Why it happens? Any help will be appreciated very much. Thanks in advance, Vitaly Below I added the output of dmesg and kernel config. cross CPUs: passed. migration_task 0 on cpu=0 migration_task 1 on cpu=1 migration_task 2 on cpu=2 migration_task 3 on cpu=3 ACPI: Subsystem revision 20040326 PCI: PCI BIOS revision 2.10 entry at 0xfd741, last bus=26 PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: System [ACPI] (supports S0 S1 S4 S5) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) Transparent bridge - PCI device 10de:005c ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19) *0 ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19) *0 ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19) *0 ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19) *0 ACPI: PCI Interrupt Link [LNK5] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [LSI1] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Root Bridge [PCI2] (00:18) PCI: Probing PCI hardware (bus 18) ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.G0PA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.G0PB._PRT] PCI: Probing PCI hardware ACPI: PCI Interrupt Link [LSMB] enabled at IRQ 23 00:00:01[A] -> 4-23 -> IRQ 23 level high ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22 00:00:02[A] -> 4-22 -> IRQ 22 level high ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 21 00:00:02[B] -> 4-21 -> IRQ 21 level high ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 00:00:0a[A] -> 4-20 -> IRQ 20 level high ACPI: PCI Interrupt Link [LACI] enabled at IRQ 23 ACPI: PCI Interrupt Link [LMCI] enabled at IRQ 22 ACPI: PCI Interrupt Link [LPID] enabled at IRQ 21 ACPI: PCI Interrupt Link [LTID] enabled at IRQ 20 ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 23 ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 19 00:01:06[A] -> 4-19 -> IRQ 19 level high ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 18 00:01:04[A] -> 4-18 -> IRQ 18 level high ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 17 00:01:04[B] -> 4-17 -> IRQ 17 level high ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 16 00:01:04[D] -> 4-16 -> IRQ 16 level high 00:19:02[A] -> 5-2 -> IRQ 26 level low 00:19:02[B] -> 5-3 -> IRQ 27 level low 00:19:02[C] -> 5-0 -> IRQ 24 level low 00:19:02[D] -> 5-1 -> IRQ 25 level low 00:1a:03[A] -> 6-2 -> IRQ 30 level low 00:1a:03[B] -> 6-3 -> IRQ 31 level low 00:1a:03[C] -> 6-0 -> IRQ 28 level low 00:1a:03[D] -> 6-1 -> IRQ 29 level low number of MP IRQ sources: 16. number of IO-APIC #4 registers: 24. number of IO-APIC #5 registers: 4. number of IO-APIC #6 registers: 4. testing the IO APIC....................... IO APIC #4...... .... register #00: 04000000 ....... : physical APIC id: 04 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 04000000 ....... : arbitration: 04 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 00F 0F 0 0 0 0 0 1 1 31 01 00F 0F 0 0 0 0 0 1 1 39 02 00F 0F 0 0 0 0 0 1 1 41 03 00F 0F 0 0 0 0 0 1 1 49 04 00F 0F 0 0 0 0 0 1 1 51 05 00F 0F 0 0 0 0 0 1 1 59 06 00F 0F 0 0 0 0 0 1 1 61 07 00F 0F 1 0 0 0 0 1 1 69 08 00F 0F 0 0 0 0 0 1 1 71 09 00F 0F 0 1 0 1 0 1 1 79 0a 00F 0F 0 0 0 0 0 1 1 81 0b 00F 0F 0 0 0 0 0 1 1 89 0c 00F 0F 0 0 0 0 0 1 1 91 0d 00F 0F 0 0 0 0 0 1 1 99 0e 00F 0F 0 0 0 0 0 1 1 A1 0f 00F 0F 0 0 0 0 0 1 1 A9 10 00F 0F 1 1 0 0 0 1 1 E9 11 00F 0F 1 1 0 0 0 1 1 E1 12 00F 0F 1 1 0 0 0 1 1 D9 13 00F 0F 1 1 0 0 0 1 1 D1 14 00F 0F 1 1 0 0 0 1 1 C9 15 00F 0F 1 1 0 0 0 1 1 C1 16 00F 0F 1 1 0 0 0 1 1 B9 17 00F 0F 1 1 0 0 0 1 1 B1 IO APIC #5...... .... register #00: 05000000 ....... : physical APIC id: 05 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00030011 ....... : max redirection entries: 0003 An unexpected IO-APIC was found. If this kernel release is less than three months old please report this to [EMAIL PROTECTED] ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 00F 0F 1 1 0 1 0 1 1 42 01 00F 0F 1 1 0 1 0 1 1 4A 02 00F 0F 1 1 0 1 0 1 1 32 03 00F 0F 1 1 0 1 0 1 1 3A IO APIC #6...... .... register #00: 06000000 ....... : physical APIC id: 06 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00030011 ....... : max redirection entries: 0003 An unexpected IO-APIC was found. If this kernel release is less than three months old please report this to [EMAIL PROTECTED] ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 00F 0F 1 1 0 1 0 1 1 62 01 00F 0F 1 1 0 1 0 1 1 6A 02 00F 0F 1 1 0 1 0 1 1 52 03 00F 0F 1 1 0 1 0 1 1 5A IRQ to pin mappings: IRQ0 -> 0:0 IRQ1 -> 0:1 IRQ2 -> 0:2 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 IRQ20 -> 0:20 IRQ21 -> 0:21 IRQ22 -> 0:22 IRQ23 -> 0:23 IRQ24 -> 1:0 IRQ25 -> 1:1 IRQ26 -> 1:2 IRQ27 -> 1:3 IRQ28 -> 2:0 IRQ29 -> 2:1 IRQ30 -> 2:2 IRQ31 -> 2:3 .................................... done. PCI: Using ACPI for IRQ routing PCI: Cannot allocate resource region 4 of device 00:01.1 PCI: Cannot allocate resource region 5 of device 00:01.1 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS not found. Starting kswapd allocated 32 pages and 32 bhs reserved for the highmem bounces VFS: Disk quotas vdquot_6.5.1 Journalled Block Device driver loaded udf: registering filesystem ACPI: Power Button (FF) [PWRF] pty: 256 Unix98 ptys configured keyboard: Timeout - AT keyboard not present?(ed) keyboard: Timeout - AT keyboard not present?(f4) Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A [c4c5c000] /dev/epoll: driver installed. floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 28000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SCSI subsystem driver Revision: 1.00 libata version 1.20 loaded. PCI(00:07.0): version 0.8 PCI: Setting latency timer of device 00:07.0 to 64 PCI: Setting latency timer of device 00:08.0 to 64 ata1: SATA max UDMA/133 cmd 0x1440 ctl 0x1436 bmdma 0x1410 irq 20 ata2: SATA max UDMA/133 cmd 0x1438 ctl 0x1432 bmdma 0x1418 irq 20 ata1: dev 0 cfg 49:2f00 82:746b 83:7f61 84:4063 85:7469 86:3d41 87:4063 88:407f ata1: dev 0 ATA-7, max UDMA/133, 321672960 sectors: LBA48 ata1: dev 0 configured for UDMA/133 ata2: no device found (phy stat 00000000) ata3: SATA max UDMA/133 cmd 0x1458 ctl 0x144E bmdma 0x1420 irq 23 ata4: SATA max UDMA/133 cmd 0x1450 ctl 0x144A bmdma 0x1428 irq 23 ata3: no device found (phy stat 00000000) ata4: no device found (phy stat 00000000) scsi0 : sata_nv scsi1 : sata_nv scsi2 : sata_nv scsi3 : sata_nv Vendor: ATA Model: WDC WD1600YS-01S Rev: 20.0 Type: Direct-Access ANSI SCSI revision: 05 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB) Partition check: sda: sda1 sda2 < sda5 sda6 sda7 > sda3 sda4 Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] usb.c: registered new driver usbdevfs usb.c: registered new driver hub PCI: Setting latency timer of device 00:02.1 to 64 ehci_hcd 00:02.1: PCI device 10de:005b ehci_hcd 00:02.1: irq 21, pci mem f880e000 usb.c: new USB bus registered, assigned bus number 1 PCI: cache line size of 64 is not supported by device 00:02.1 ehci_hcd 00:02.1: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4 hub.c: USB hub found hub.c: 10 ports detected PCI: Setting latency timer of device 00:02.0 to 64 host/usb-ohci.c: USB OHCI at membase 0xf8810000, IRQ 22 host/usb-ohci.c: usb-00:02.0, PCI device 10de:005a usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 10 ports detected usb.c: registered new driver usblcd usblcd.c: USBLCD Driver Version 1.03 (C) Adams IT Services http://www.usblcd.de usblcd.c: USBLCD support registered. usb.c: registered new driver serial usbserial.c: USB Serial Driver core v1.4 usbserial.c: USB Serial support registered for FTDI SIO usbserial.c: USB Serial support registered for FTDI 8U232AM Compatible usbserial.c: USB Serial support registered for FTDI FT232BM Compatible usbserial.c: USB Serial support registered for USB-UIRT Infrared Tranceiver usbserial.c: USB Serial support registered for Home-Electronics TIRA-1 IR Transceiver ftdi_sio.c: v1.3.5:USB FTDI Serial Converters Driver NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 65536 buckets, 512Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. ds: no socket drivers loaded! RAMDISK: Compressed image found at block 0 Freeing initrd memory: 8809k freed VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 128k freed Adding Swap: 2097136k swap-space (priority -1) kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,5), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,7), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,6), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,3), internal journal hub.c: new USB device 00:02.0-7, assigned address 2 EXT3-fs: mounted filesystem with ordered data mode. usbserial.c: FTDI 8U232AM Compatible converter detected usbserial.c: FTDI 8U232AM Compatible converter now attached to ttyUSB0 (or usb/tts/0 for devfs) kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,3), internal journal EXT3-fs: mounted filesystem with ordered data mode. Silicom Bypass Gigabit Ethernet Driver slcm5700 ver. 8.3.9.silc.2.7(28/06/06) eth0: Silicom Bypass PEG2BP series adapter found at mem df010000, IRQ 16, node addr 00e0ed10d90a eth0: Broadcom BCM5714 Integrated Copper transceiver found eth0: Scatter-gather ON, 64-bit DMA ON, Tx Checksum ON, Rx Checksum ON, 802.1Q VLAN ON, NAPI ON eth1: Silicom Bypass PEG2BP series adapter found at mem df030000, IRQ 18, node addr 00e0ed10d90b eth1: Broadcom BCM5714 Integrated Copper transceiver found eth1: Scatter-gather ON, 64-bit DMA ON, Tx Checksum ON, Rx Checksum ON, 802.1Q VLAN ON, NAPI ON eth2: Silicom Bypass PEG2BP series adapter found at mem df110000, IRQ 19, node addr 00e0ed10d8b8 eth2: Broadcom BCM5714 Integrated Copper transceiver found eth2: Scatter-gather ON, 64-bit DMA ON, Tx Checksum ON, Rx Checksum ON, 802.1Q VLAN ON, NAPI ON eth3: Silicom Bypass PEG2BP series adapter found at mem df130000, IRQ 16, node addr 00e0ed10d8b9 eth3: Broadcom BCM5714 Integrated Copper transceiver found eth3: Scatter-gather ON, 64-bit DMA ON, Tx Checksum ON, Rx Checksum ON, 802.1Q VLAN ON, NAPI ON tg3.c:v3.43f (Jan 9, 2006) eth4: Tigon3 [partno(BCM95704A7) rev 2100 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:47:97:a2 eth4: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[0] eth4: dma_rwctrl[769f4000] eth5: Tigon3 [partno(BCM95704A7) rev 2100 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:47:97:a3 eth5: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[0] eth5: dma_rwctrl[769f4000] Intel(R) PRO/1000 Network Driver - version 7.2.9 Copyright (c) 1999-2006 Intel Corporation. Intel(R) PRO/1000 Network Driver - version 7.2.9 Copyright (c) 1999-2006 Intel Corporation. BCM5820 driver v1.82: BCM5820: <1>Device startup failed Rainbow Technologies CryptoSwift Linux Driver v3.0.0 Cavium Driver --- 0.99-k N1 Device found at Bus 25 Slot 2 bar 0: 3400 bar 2: 3000 Local Mem size 20000000 Number of banks 1 DDR size : 0x20000000 mem base: 4194304 max 532676608 Finished Initializing this device MAX 1 N1 Devices supported Ignoring other N1 devices Total Number of N1/N1-Lite Devices: 1 Completion Addr f56a8000 Completion Bus Addr 356a8000 Starting poll_thread Registeration is a success The major device number is 125 if you want to talk to the device driver, I suggest you use: mknod pkp_drv c 125 0 Loaded Cavium Driver --- 0.99-k got boot microcode Code type = 02, code size = 95c, data size = d8 got mainline microcode Code type = 01, code size = 5f70, data size = e0 UEN = 0xffff Final Core Mask = 0x0000ffff Loaded Boot microcode Loaded Main microcode Loading of Microcodes successful device count = 1 eth0: Using PCI INTX interrupt remove_proc_entry: bypass/bypass_eth0 busy, count=1 slcm5700: eth0 NIC Link is DOWN eth2: Using PCI INTX interrupt remove_proc_entry: bypass/bypass_eth2 busy, count=2 slcm5700: eth2 NIC Link is DOWN eth0: Using PCI INTX interrupt eth1: Using PCI INTX interrupt eth2: Using PCI INTX interrupt eth3: Using PCI INTX interrupt tg3: eth4: Link is up at 100 Mbps, full duplex. tg3: eth4: Flow control is on for TX and on for RX. slcm5700: eth0 NIC Link is DOWN slcm5700: eth1 NIC Link is DOWN slcm5700: eth2 NIC Link is DOWN slcm5700: eth3 NIC Link is DOWN device eth0 entered promiscuous mode # # Automatically generated by make menuconfig: don't edit # CONFIG_X86=y # CONFIG_SBUS is not set CONFIG_UID16=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y # # Loadable module support # CONFIG_MODULES=y CONFIG_MODVERSIONS=y CONFIG_KMOD=y # # Processor type and features # # CONFIG_LOLAT is not set # CONFIG_LOLAT_SYSCTL is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set CONFIG_MPENTIUMIII=y # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MELAN is not set # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y # CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_L1_CACHE_SHIFT=5 CONFIG_X86_HAS_TSC=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_PGE=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_F00F_WORKS_OK=y # CONFIG_X86_MCE is not set # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set # CONFIG_EDD is not set # CONFIG_NOHIGHMEM is not set # CONFIG_HIGHMEM4G is not set CONFIG_HIGHMEM64G=y CONFIG_HIGHMEM=y CONFIG_X86_PAE=y CONFIG_HIGHIO=y # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y CONFIG_SMP=y # CONFIG_PREEMPT is not set CONFIG_NR_CPUS=32 # CONFIG_X86_NUMA is not set # CONFIG_X86_TSC_DISABLE is not set CONFIG_X86_TSC=y CONFIG_HAVE_DEC_LOCK=y # # General setup # CONFIG_HZ=500 CONFIG_NET=y CONFIG_X86_IO_APIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_ISA=y # CONFIG_PCI_NAMES is not set CONFIG_EISA=y # CONFIG_MCA is not set CONFIG_HOTPLUG=y # # PCMCIA/CardBus support # CONFIG_PCMCIA=y CONFIG_CARDBUS=y # CONFIG_TCIC is not set # CONFIG_I82092 is not set # CONFIG_I82365 is not set # # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set # CONFIG_HOTPLUG_PCI_COMPAQ is not set # CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set # CONFIG_HOTPLUG_PCI_IBM is not set # CONFIG_HOTPLUG_PCI_ACPI is not set # CONFIG_HOTPLUG_PCI_SHPC is not set # CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set # CONFIG_HOTPLUG_PCI_PCIE is not set # CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y CONFIG_KCORE_ELF=y # CONFIG_KCORE_AOUT is not set # CONFIG_BINFMT_AOUT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_OOM_KILLER is not set CONFIG_PM=y CONFIG_APM=y # CONFIG_APM_IGNORE_USER_SUSPEND is not set # CONFIG_APM_DO_ENABLE is not set # CONFIG_APM_CPU_IDLE is not set # CONFIG_APM_DISPLAY_BLANK is not set # CONFIG_APM_RTC_IS_GMT is not set # CONFIG_APM_ALLOW_INTS is not set # CONFIG_APM_REAL_MODE_POWER_OFF is not set # # ACPI Support # CONFIG_ACPI=y CONFIG_ACPI_BOOT=y CONFIG_ACPI_BUS=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_MMCONFIG=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_AC is not set # CONFIG_ACPI_BATTERY is not set CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y # CONFIG_ACPI_PROCESSOR is not set # CONFIG_ACPI_THERMAL is not set # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_TOSHIBA is not set # CONFIG_ACPI_DEBUG is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # # CONFIG_PARPORT is not set # # Plug and Play configuration # CONFIG_PNP=y CONFIG_ISAPNP=y # # Block devices # CONFIG_BLK_DEV_FD=y # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_CISS_SCSI_TAPE is not set # CONFIG_CISS_MONITOR_THREAD is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set CONFIG_BLK_DEV_SX8=y CONFIG_BLK_DEV_LOOP=m # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_INITRD=y CONFIG_BLK_STATS=y # # Multi-device support (RAID and LVM) # # CONFIG_MD is not set # CONFIG_BLK_DEV_MD is not set # CONFIG_MD_LINEAR is not set # CONFIG_MD_RAID0 is not set # CONFIG_MD_RAID1 is not set # CONFIG_MD_RAID5 is not set # CONFIG_MD_MULTIPATH is not set # CONFIG_BLK_DEV_LVM is not set # # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_NETLINK_DEV=y CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_FILTER=y CONFIG_UNIX=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set CONFIG_INET_ECN=y CONFIG_SYN_COOKIES=y CONFIG_RW_TPROXY=y CONFIG_RW_SYN_DIVERT=y # # IP: Netfilter Configuration # CONFIG_IP_NF_CONNTRACK=m # CONFIG_IP_NF_FTP is not set # CONFIG_IP_NF_CONNTRACK_MARK is not set # CONFIG_IP_NF_AMANDA is not set # CONFIG_IP_NF_TFTP is not set # CONFIG_IP_NF_IRC is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_LIMIT=m # CONFIG_IP_NF_SET is not set # CONFIG_IP_NF_SET is not set # CONFIG_IP_NF_MATCH_QUOTA is not set # CONFIG_IP_NF_MATCH_IPRANGE is not set CONFIG_IP_NF_MATCH_MAC=m # CONFIG_IP_NF_MATCH_PKTTYPE is not set CONFIG_IP_NF_MATCH_MARK=m CONFIG_IP_NF_MATCH_MULTIPORT=m CONFIG_IP_NF_MATCH_TOS=m # CONFIG_IP_NF_MATCH_TIME is not set # CONFIG_IP_NF_MATCH_RANDOM is not set # CONFIG_IP_NF_MATCH_PSD is not set # CONFIG_IP_NF_MATCH_OSF is not set # CONFIG_IP_NF_MATCH_NTH is not set # CONFIG_IP_NF_MATCH_IPV4OPTIONS is not set # CONFIG_IP_NF_MATCH_FUZZY is not set # CONFIG_IP_NF_MATCH_RECENT is not set # CONFIG_IP_NF_MATCH_ECN is not set # CONFIG_IP_NF_MATCH_DSCP is not set # CONFIG_IP_NF_MATCH_AH_ESP is not set CONFIG_IP_NF_MATCH_LENGTH=m # CONFIG_IP_NF_MATCH_U32 is not set CONFIG_IP_NF_MATCH_TTL=m # CONFIG_IP_NF_MATCH_ADDRTYPE is not set CONFIG_IP_NF_MATCH_TCPMSS=m # CONFIG_IP_NF_MATCH_REALM is not set # CONFIG_IP_NF_MATCH_COMMENT is not set # CONFIG_IP_NF_MATCH_HELPER is not set CONFIG_IP_NF_MATCH_STATE=m # CONFIG_IP_NF_MATCH_CONNLIMIT is not set # CONFIG_IP_NF_MATCH_CONNTRACK is not set # CONFIG_IP_NF_MATCH_UNCLEAN is not set # CONFIG_IP_NF_MATCH_OWNER is not set CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m # CONFIG_IP_NF_TARGET_NETLINK is not set # CONFIG_IP_NF_TARGET_IPV4OPTSSTRIP is not set CONFIG_IP_NF_TARGET_MIRROR=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y # CONFIG_IP_NF_NAT_NRES is not set CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m # CONFIG_IP_NF_TARGET_NETMAP is not set # CONFIG_IP_NF_TARGET_SAME is not set # CONFIG_IP_NF_NAT_SNMP_BASIC is not set CONFIG_IP_NF_TPROXY=m CONFIG_IP_NF_TARGET_TPROXY=m CONFIG_IP_NF_MATCH_TPROXY=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m # CONFIG_IP_NF_TARGET_ECN is not set # CONFIG_IP_NF_TARGET_DSCP is not set CONFIG_IP_NF_TARGET_MARK=m CONFIG_IP_NF_TARGET_ROUTE=m # CONFIG_IP_NF_TARGET_CLASSIFY is not set CONFIG_IP_NF_TARGET_LOG=m # CONFIG_IP_NF_TARGET_TTL is not set CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m CONFIG_IP_NF_RAW=m CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m # CONFIG_IP_NF_ARP_MANGLE is not set CONFIG_IP_NF_COMPAT_IPCHAINS=m CONFIG_IP_NF_NAT_NEEDED=y # CONFIG_IP_NF_COMPAT_IPFWADM is not set # # IP: Virtual Server Configuration # # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set # CONFIG_KHTTPD is not set # # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set # CONFIG_ATM is not set # CONFIG_VLAN_8021Q is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_DECNET is not set CONFIG_BRIDGE=m CONFIG_BRIDGE_NF=y # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_LLC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # # Telephony Support # # CONFIG_PHONE is not set # CONFIG_PHONE_IXJ is not set # CONFIG_PHONE_IXJ_PCMCIA is not set # # ATA/IDE/MFM/RLL support # CONFIG_IDE=y # # IDE, ATA and ATAPI Block devices # CONFIG_BLK_DEV_IDE=y # CONFIG_BLK_DEV_HD_IDE is not set # CONFIG_BLK_DEV_HD is not set # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y # CONFIG_IDEDISK_STROKE is not set # CONFIG_BLK_DEV_IDECS is not set # CONFIG_BLK_DEV_DELKIN is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_BLK_DEV_CMD640=y CONFIG_BLK_DEV_CMD640_ENHANCED=y # CONFIG_BLK_DEV_ISAPNP is not set CONFIG_BLK_DEV_IDEPCI=y # CONFIG_BLK_DEV_GENERIC is not set # CONFIG_IDEPCI_SHARE_IRQ is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_PCI_WIP is not set # CONFIG_BLK_DEV_ADMA100 is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_WDC_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_AMD74XX_OVERRIDE is not set # CONFIG_BLK_DEV_ATIIXP is not set CONFIG_BLK_DEV_CMD64X=y # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_HPT34X_AUTODMA is not set # CONFIG_BLK_DEV_HPT366 is not set CONFIG_BLK_DEV_PIIX=y # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_PDC202XX_BURST is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_RZ1000 is not set # CONFIG_BLK_DEV_SC1200 is not set CONFIG_BLK_DEV_SVWKS=y # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_IDE_CHIPSETS is not set CONFIG_IDEDMA_AUTO=y # CONFIG_IDEDMA_IVB is not set # CONFIG_DMA_NONPCI is not set # CONFIG_BLK_DEV_ATARAID is not set # CONFIG_BLK_DEV_ATARAID_PDC is not set # CONFIG_BLK_DEV_ATARAID_HPT is not set # CONFIG_BLK_DEV_ATARAID_MEDLEY is not set # CONFIG_BLK_DEV_ATARAID_SII is not set # # SCSI support # CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SD_EXTRA_DEVS=40 # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=m CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_SR_EXTRA_DEVS=2 CONFIG_CHR_DEV_SG=y CONFIG_SCSI_DEBUG_QUEUES=y # CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y # # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AHA1740 is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_AM53C974 is not set # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_MEGARAID2 is not set CONFIG_SCSI_SATA=y # CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set CONFIG_SCSI_SATA_NV=y # CONFIG_SCSI_SATA_QSTOR is not set # CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set # CONFIG_SCSI_SATA_SIS is not set # CONFIG_SCSI_SATA_ULI is not set # CONFIG_SCSI_SATA_VIA is not set # CONFIG_SCSI_SATA_VITESSE is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_DMA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_NCR53C7xx is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_NCR53C8XX is not set # CONFIG_SCSI_SYM53C8XX is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PCI2000 is not set # CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_SEAGATE is not set # CONFIG_SCSI_SIM710 is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # # PCMCIA SCSI adapter support # # CONFIG_SCSI_PCMCIA is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # CONFIG_FUSION_BOOT is not set # CONFIG_FUSION_ISENSE is not set # CONFIG_FUSION_CTL is not set # CONFIG_FUSION_LAN is not set # # IEEE 1394 (FireWire) support (EXPERIMENTAL) # # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set # CONFIG_I2O_PCI is not set # CONFIG_I2O_BLOCK is not set # CONFIG_I2O_LAN is not set # CONFIG_I2O_SCSI is not set # CONFIG_I2O_PROC is not set # # Network device support # CONFIG_NETDEVICES=y # # ARCnet devices # # CONFIG_ARCNET is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_ETHERTAP is not set # CONFIG_NET_SB1000 is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y # CONFIG_SUNLANCE is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNBMAC is not set # CONFIG_SUNQE is not set # CONFIG_SUNGEM is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_AC3200 is not set # CONFIG_APRICOT is not set # CONFIG_B44 is not set # CONFIG_CS89x0 is not set # CONFIG_TULIP is not set # CONFIG_DE4X5 is not set # CONFIG_DGRS is not set # CONFIG_DM9102 is not set CONFIG_EEPRO100=m # CONFIG_EEPRO100_PIO is not set CONFIG_E100=m # CONFIG_LNE390 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_FORCEDETH is not set # CONFIG_NE3210 is not set # CONFIG_ES3210 is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set # CONFIG_8139TOO_PIO is not set # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_SUNDANCE_MMIO is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_VIA_RHINE_MMIO is not set # CONFIG_WINBOND_840 is not set # CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=m # CONFIG_E1000_NAPI is not set # CONFIG_MYRI_SBUS is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Token Ring devices # # CONFIG_TR is not set # CONFIG_NET_FC is not set # CONFIG_RCPCI is not set # CONFIG_SHAPER is not set # # Wan interfaces # # CONFIG_WAN is not set # # PCMCIA network device support # CONFIG_NET_PCMCIA=y # CONFIG_PCMCIA_3C589 is not set # CONFIG_PCMCIA_3C574 is not set # CONFIG_PCMCIA_FMVJ18X is not set CONFIG_PCMCIA_PCNET=y # CONFIG_PCMCIA_AXNET is not set # CONFIG_PCMCIA_NMCLAN is not set # CONFIG_PCMCIA_SMC91C92 is not set # CONFIG_PCMCIA_XIRC2PS is not set # CONFIG_ARCNET_COM20020_CS is not set # CONFIG_PCMCIA_IBMTR is not set # CONFIG_PCMCIA_XIRCOM is not set # CONFIG_PCMCIA_XIRTULIP is not set CONFIG_NET_PCMCIA_RADIO=y # CONFIG_PCMCIA_RAYCS is not set # CONFIG_PCMCIA_NETWAVE is not set # CONFIG_PCMCIA_WAVELAN is not set # CONFIG_AIRONET4500_CS is not set # # Amateur Radio support # # CONFIG_HAMRADIO is not set # # IrDA (infrared) support # # CONFIG_IRDA is not set # # ISDN subsystem # # CONFIG_ISDN is not set # # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set # # Input core support # # CONFIG_INPUT is not set # CONFIG_INPUT_KEYBDEV is not set # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_UINPUT is not set # CONFIG_DUMMY_KEYB is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_SERIAL=y CONFIG_SERIAL_CONSOLE=y # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 # # I2C support # # CONFIG_I2C is not set # # Mice # # CONFIG_BUSMOUSE is not set # CONFIG_MOUSE is not set # # Joysticks # # CONFIG_INPUT_GAMEPORT is not set # CONFIG_QIC02_TAPE is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_IPMI_PANIC_EVENT is not set # CONFIG_IPMI_DEVICE_INTERFACE is not set # CONFIG_IPMI_KCS is not set # CONFIG_IPMI_WATCHDOG is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_SCx200 is not set # CONFIG_SCx200_GPIO is not set # CONFIG_AMD_RNG is not set # CONFIG_INTEL_RNG is not set # CONFIG_HW_RANDOM is not set # CONFIG_AMD_PM768 is not set # CONFIG_NVRAM is not set CONFIG_EVENTPOLL=y # CONFIG_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set # CONFIG_AGP is not set # # Direct Rendering Manager (XFree86 DRI support) # # CONFIG_DRM is not set # # PCMCIA character devices # # CONFIG_PCMCIA_SERIAL_CS is not set # CONFIG_SYNCLINK_CS is not set # CONFIG_MWAVE is not set # CONFIG_OBMOUSE is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # File systems # CONFIG_QUOTA=y # CONFIG_QFMT_V2 is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set CONFIG_REISERFS_PROC_INFO=y # CONFIG_ADFS_FS is not set # CONFIG_ADFS_FS_RW is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BEFS_DEBUG is not set # CONFIG_BFS_FS is not set CONFIG_EXT3_FS=y CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FAT_FS=y CONFIG_MSDOS_FS=m CONFIG_UMSDOS_FS=m CONFIG_VFAT_FS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set CONFIG_TMPFS=y CONFIG_RAMFS=y CONFIG_ISO9660_FS=y CONFIG_JOLIET=y # CONFIG_ZISOFS is not set # CONFIG_JFS_FS is not set # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set # CONFIG_MINIX_FS is not set # CONFIG_VXFS_FS is not set # CONFIG_NTFS_FS is not set # CONFIG_NTFS_RW is not set # CONFIG_HPFS_FS is not set CONFIG_PROC_FS=y # CONFIG_DEVFS_FS is not set # CONFIG_DEVFS_MOUNT is not set # CONFIG_DEVFS_DEBUG is not set CONFIG_DEVPTS_FS=y # CONFIG_QNX4FS_FS is not set # CONFIG_QNX4FS_RW is not set CONFIG_ROMFS_FS=m CONFIG_EXT2_FS=y # CONFIG_SYSV_FS is not set CONFIG_UDF_FS=y # CONFIG_UDF_RW is not set # CONFIG_UFS_FS is not set # CONFIG_UFS_FS_WRITE is not set # CONFIG_XFS_FS is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_RT is not set # CONFIG_XFS_TRACE is not set # CONFIG_XFS_DEBUG is not set # # Network File Systems # # CONFIG_CODA_FS is not set # CONFIG_INTERMEZZO_FS is not set CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_DIRECTIO is not set # CONFIG_ROOT_NFS is not set # CONFIG_NFSD is not set # CONFIG_NFSD_V3 is not set # CONFIG_NFSD_TCP is not set CONFIG_SUNRPC=m CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set # CONFIG_SMB_UNIX is not set CONFIG_NCP_FS=m # CONFIG_NCPFS_PACKET_SIGNING is not set # CONFIG_NCPFS_IOCTL_LOCKING is not set # CONFIG_NCPFS_STRONG is not set # CONFIG_NCPFS_NFS_NS is not set # CONFIG_NCPFS_OS2_NS is not set # CONFIG_NCPFS_SMALLDOS is not set CONFIG_NCPFS_NLS=m # CONFIG_NCPFS_EXTRAS is not set # CONFIG_ZISOFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_SMB_NLS=y CONFIG_NLS=y # # Native Language Support # CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_CODEPAGE_737=m CONFIG_NLS_CODEPAGE_775=m CONFIG_NLS_CODEPAGE_850=m CONFIG_NLS_CODEPAGE_852=m CONFIG_NLS_CODEPAGE_855=m CONFIG_NLS_CODEPAGE_857=m CONFIG_NLS_CODEPAGE_860=m CONFIG_NLS_CODEPAGE_861=m CONFIG_NLS_CODEPAGE_862=m CONFIG_NLS_CODEPAGE_863=m CONFIG_NLS_CODEPAGE_864=m CONFIG_NLS_CODEPAGE_865=m CONFIG_NLS_CODEPAGE_866=m CONFIG_NLS_CODEPAGE_869=m CONFIG_NLS_CODEPAGE_936=m CONFIG_NLS_CODEPAGE_950=m CONFIG_NLS_CODEPAGE_932=m CONFIG_NLS_CODEPAGE_949=m CONFIG_NLS_CODEPAGE_874=m CONFIG_NLS_ISO8859_8=m CONFIG_NLS_CODEPAGE_1250=m CONFIG_NLS_CODEPAGE_1251=m CONFIG_NLS_ISO8859_1=m CONFIG_NLS_ISO8859_2=m CONFIG_NLS_ISO8859_3=m CONFIG_NLS_ISO8859_4=m CONFIG_NLS_ISO8859_5=m CONFIG_NLS_ISO8859_6=m CONFIG_NLS_ISO8859_7=m CONFIG_NLS_ISO8859_9=m CONFIG_NLS_ISO8859_13=m CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m # CONFIG_NLS is not set # # Console drivers # CONFIG_VGA_CONSOLE=y # CONFIG_VIDEO_SELECT is not set # CONFIG_MDA_CONSOLE is not set # # Frame-buffer support # # CONFIG_FB is not set # # Sound # # CONFIG_SOUND is not set # # USB support # CONFIG_USB=y # CONFIG_USB_DEBUG is not set CONFIG_USB_DEVICEFS=y CONFIG_USB_BANDWIDTH=y CONFIG_USB_EHCI_HCD=y # CONFIG_USB_UHCI is not set # CONFIG_USB_UHCI_ALT is not set CONFIG_USB_OHCI=y # CONFIG_USB_SL811HS_ALT is not set # CONFIG_USB_SL811HS is not set # CONFIG_USB_AUDIO is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_BLUETOOTH is not set # CONFIG_USB_MIDI is not set CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_HP8200e is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_HID is not set # CONFIG_USB_HIDINPUT is not set # CONFIG_USB_HIDDEV is not set # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_DC2XX is not set # CONFIG_USB_MDC800 is not set # CONFIG_USB_SCANNER is not set # CONFIG_USB_MICROTEK is not set # CONFIG_USB_HPUSBSCSI is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_CATC is not set # CONFIG_USB_CDCETHER is not set # CONFIG_USB_USBNET is not set # CONFIG_USB_USS720 is not set # # USB Serial Converter support # CONFIG_USB_SERIAL=y # CONFIG_USB_SERIAL_DEBUG is not set # CONFIG_USB_SERIAL_GENERIC is not set # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set # CONFIG_USB_SERIAL_EMPEG is not set CONFIG_USB_SERIAL_FTDI_SIO=y # CONFIG_USB_SERIAL_VISOR is not set # CONFIG_USB_SERIAL_IPAQ is not set # CONFIG_USB_SERIAL_IR is not set # CONFIG_USB_SERIAL_EDGEPORT is not set # CONFIG_USB_SERIAL_EDGEPORT_TI is not set # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set # CONFIG_USB_SERIAL_KEYSPAN is not set # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_KLSI is not set # CONFIG_USB_SERIAL_KOBIL_SCT is not set # CONFIG_USB_SERIAL_PL2303 is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set # CONFIG_USB_SERIAL_OMNINET is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_TIGL is not set # CONFIG_USB_BRLVGER is not set CONFIG_USB_LCD=y # # Support for USB gadgets # # CONFIG_USB_GADGET is not set # # Bluetooth support # # CONFIG_BLUEZ is not set # # Kernel hacking # CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_HIGHMEM is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_IOVIRT is not set CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_FRAME_POINTER is not set CONFIG_LOG_BUF_SHIFT=0 # # Cryptographic options # # CONFIG_CRYPTO is not set # # Library routines # CONFIG_CRC32=y CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m # CONFIG_FW_LOADER is not set -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/