Hello all In a project Iam using 7448 powerpc processor . In that board iam using ISP 1562 philips PCI based usb controller. The problem iam facing is in Linux level the usb ports are detecting only ehci high speed devices(flash mem stick) But it is not detecting low speed devices(mouse,keyboard) and reporting Unlink no irq..Controller probably using wrong irq.
As per ISP 1562 the same interrupt is routed to 3 functions inside one controller( 2 ohci and 1 ehci) The interrupt works for the ehci device ( flash mem stick) The same interrupt is assigned for ohci function. I removed the flash stick and inserted an ohci device(mouse) but iam getting unlink after no IRQ How the interrupt works for ehci and the same interrupt not working for ohci ? I can ensure that the IRQ assignment has been done properly as well as I have enabled necesary configs in menuconfig for ehci and ohci I tried linux version 2.6.12 , 2.6.16.60 and also 2.6.23 , 2.6.24 .. In all these iam facing the above issues Please shed some light to solve the issue Thanks Below are some observations ----------------------------------------------- BEFORE INSERTING MOUSE / # cat /proc/interrupts CPU0 12: 99 tsi108_pic Level serial 36: 1 tsi108_PCI_int Level VMEBus (Tsi148) 39: 0 tsi108_PCI_int Level ehci_hcd:usb1, ohci_hcd:usb2, ohci_hcd :usb3 AFTER INSERTING MOUSE / # usb 3-1: new low speed USB device using ohci_hcd and address 2 ohci_hcd 0000:01:04.1: Unlink after no-IRQ? Controller is probably using the wrong IRQ. / # cat /proc/interrupts CPU0 12: 130 tsi108_pic Level serial 36: 1 tsi108_PCI_int Level VMEBus (Tsi148) 39: 2 tsi108_PCI_int Level ehci_hcd:usb1, ohci_hcd:usb2, ohci_hcd:usb3 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/