-------------- Original message ---------------------- From: Marcel Holtmann <[EMAIL PROTECTED]> > Hi Quel, > > > Bad news: I still cannot use the device. > > > > hcitool inq, hcitool scan, hcitool name <btaddr> and hcitool info > > <btaddr> > > commands work. > > > > hcitool cc <btaddr>, sdptool <btaddr>, rfcomm connect command fail, > > most of them > > with a 'Connection reset by peer' error. > > what does "hciconfig hci0 version" tell you about your device? Some of > the none major based Bluetooth chips are broken and might need an > extra tweak within the USB driver. >
Marcel, # hciconfig hci0 version hci0: Type: USB BD Address: 00:03:0D:00:15:47 ACL MTU: 192:8 SCO MTU: 64:8 HCI Ver: 1.1 (0x1) HCI Rev: 0xbc LMP Ver: 1.1 (0x1) LMP Subver: 0xbc Manufacturer: Cambridge Silicon Radio (10) # lsusb | grep Cambridge Bus 003 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) This device works fine in 2.6.23.1 and got broken circa 2.6.24 rcs. Thank you, -- kk1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/