Recent change in the core driver to get the maximum voltage
is based on the (n_voltages -1) steps of voltage.
For the tps65910, the (n_voltages -1)th step voltage is
calculated based on the callback function list_voltage.
This function direct maps the datasheet and adjust the
first few steps for initial voltage as per datasheet,
and hence initialize the n_voltages based on datasheet.
Signed-off-by: Laxman Dewangan <ldewan...@nvidia.com>
---
This patch is created on top of
[PATCH V2] regulator: tps65910: add support for input supply
whcih is applied. But I am not able to see in regulator/for-next.
So assuming that it is applied and hence locally apply patch
before creating this patch.
drivers/regulator/tps65910-regulator.c | 22 +++++++++++-----------
1 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/regulator/tps65910-regulator.c
b/drivers/regulator/tps65910-regulator.c
index e319d96..64c93e0 100644
--- a/drivers/regulator/tps65910-regulator.c
+++ b/drivers/regulator/tps65910-regulator.c
@@ -194,66 +194,66 @@ static struct tps_info tps65911_regs[] = {
{
.name = "vdd1",
.vin_name = "vcc1",
- .n_voltages = 73,
+ .n_voltages = 0x4C,
.enable_time_us = 350,
},
{
.name = "vdd2",
.vin_name = "vcc2",
- .n_voltages = 73,
+ .n_voltages = 0x4C,
.enable_time_us = 350,
},
{
.name = "vddctrl",
- .n_voltages = 65,
+ .n_voltages = 0x44,
.enable_time_us = 900,
},
{
.name = "ldo1",
.vin_name = "vcc6",
- .n_voltages = 47,
+ .n_voltages = 0x33,
.enable_time_us = 420,
},
{
.name = "ldo2",
.vin_name = "vcc6",
- .n_voltages = 47,
+ .n_voltages = 0x33,
.enable_time_us = 420,
},
{
.name = "ldo3",
.vin_name = "vcc5",
- .n_voltages = 24,
+ .n_voltages = 0x1A,
.enable_time_us = 230,
},
{
.name = "ldo4",
.vin_name = "vcc5",
- .n_voltages = 47,
+ .n_voltages = 0x33,
.enable_time_us = 230,
},
{
.name = "ldo5",
.vin_name = "vcc4",
- .n_voltages = 24,
+ .n_voltages = 0x1A,
.enable_time_us = 230,
},
{
.name = "ldo6",
.vin_name = "vcc3",
- .n_voltages = 24,
+ .n_voltages = 0x1A,
.enable_time_us = 230,
},
{
.name = "ldo7",
.vin_name = "vcc3",
- .n_voltages = 24,
+ .n_voltages = 0x1A,
.enable_time_us = 230,
},
{
.name = "ldo8",
.vin_name = "vcc3",
- .n_voltages = 24,
+ .n_voltages = 0x1A,
.enable_time_us = 230,
},
};
--
1.7.1.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
