This macro uses the 'devpriv' macro which relies on a local variable
having a specific name. Plus it's just a wrapper around a simple
'writel'. Remove the macro.
Signed-off-by: H Hartley Sweeten <hswee...@visionengravers.com>
Cc: Ian Abbott <abbo...@mev.co.uk>
Cc: Greg Kroah-Hartman <gre...@linuxfoundation.org>
---
drivers/staging/comedi/drivers/rtd520.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/staging/comedi/drivers/rtd520.c
b/drivers/staging/comedi/drivers/rtd520.c
index ead8420..847e98c 100644
--- a/drivers/staging/comedi/drivers/rtd520.c
+++ b/drivers/staging/comedi/drivers/rtd520.c
@@ -406,10 +406,6 @@ struct rtdPrivate {
/* Macros to access registers */
-/* Set source for DMA 0 (write only, shadow?) */
-#define RtdDma0Source(dev, n) \
- writel((n) & 0xf, devpriv->las0+LAS0_DMA0_SRC)
-
/* Set source for DMA 1 (write only, shadow?) */
#define RtdDma1Source(dev, n) \
writel((n) & 0xf, devpriv->las0+LAS0_DMA1_SRC)
@@ -1464,7 +1460,7 @@ static int rtd_ai_cmd(struct comedi_device *dev, struct
comedi_subdevice *s)
RtdDma0Mode(dev, DMA_MODE_BITS);
RtdDma0Next(dev, /* point to first block */
devpriv->dma0Chain[DMA_CHAIN_COUNT - 1].next);
- RtdDma0Source(dev, DMAS_ADFIFO_HALF_FULL); /* set DMA
trigger source */
+ writel(DMAS_ADFIFO_HALF_FULL, devpriv->las0 + LAS0_DMA0_SRC);
RtdPlxInterruptWrite(dev, /* enable interrupt */
RtdPlxInterruptRead(dev) | ICS_DMA0_E);
@@ -1961,7 +1957,7 @@ static int rtd_attach(struct comedi_device *dev, struct
comedi_devconfig *it)
RtdDma0Mode(dev, DMA_MODE_BITS);
/* set DMA trigger source */
- RtdDma0Source(dev, DMAS_ADFIFO_HALF_FULL);
+ writel(DMAS_ADFIFO_HALF_FULL, devpriv->las0 + LAS0_DMA0_SRC);
} else {
printk(KERN_INFO "( no IRQ->no DMA )");
}
--
1.7.11
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
