Correcting spelling typo in mach-omap2
Signed-off-by: Masanari Iida <standby2...@gmail.com>
---
arch/arm/mach-omap2/board-apollon.c | 2 +-
arch/arm/mach-omap2/board-omap4panda.c | 2 +-
arch/arm/mach-omap2/omap-mpuss-lowpower.c | 2 +-
arch/arm/mach-omap2/sr_device.c | 2 +-
arch/arm/mach-omap2/twl-common.c | 2 +-
5 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-omap2/board-apollon.c
b/arch/arm/mach-omap2/board-apollon.c
index 502c31e..3a8b665 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -329,7 +329,7 @@ static void __init omap_apollon_init(void)
/* LCD PWR_EN */
omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP);
- /* Use Interal loop-back in MMC/SDIO Module Input Clock selection */
+ /* Use Internal loop-back in MMC/SDIO Module Input Clock selection */
v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
v |= (1 << 24);
omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
diff --git a/arch/arm/mach-omap2/board-omap4panda.c
b/arch/arm/mach-omap2/board-omap4panda.c
index 982fb26..4d2fac5 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -106,7 +106,7 @@ static struct platform_device leds_gpio = {
static struct omap_abe_twl6040_data panda_abe_audio_data = {
/* Audio out */
.has_hs = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
- /* HandsFree through expasion connector */
+ /* HandsFree through expansion connector */
.has_hf = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
/* PandaBoard: FM TX, PandaBoardES: can be connected to audio out */
.has_aux = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
index 13670aa..7787eb8 100644
--- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
+++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
@@ -313,7 +313,7 @@ int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned
int power_state)
scu_pwrst_prepare(cpu, power_state);
/*
- * CPU never retuns back if targetted power state is OFF mode.
+ * CPU never retuns back if targeted power state is OFF mode.
* CPU ONLINE follows normal CPU ONLINE ptah via
* omap_secondary_startup().
*/
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index a503e1e..62af20f 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -106,7 +106,7 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void
*user)
omap_voltage_get_volttable(sr_data->voltdm, &volt_data);
if (!volt_data) {
- pr_warning("%s: No Voltage table registerd fo VDD%d."
+ pr_warning("%s: No Voltage table registered fo VDD%d."
"Something really wrong\n\n", __func__, i + 1);
goto exit;
}
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 119d5a9..40d8abb 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -92,7 +92,7 @@ void __init omap4_pmic_init(const char *pmic_type,
void __init omap_pmic_late_init(void)
{
- /* Init the OMAP TWL parameters (if PMIC has been registerd) */
+ /* Init the OMAP TWL parameters (if PMIC has been registered) */
if (pmic_i2c_board_info.irq)
omap3_twl_init();
if (omap4_i2c1_board_info[0].irq)
--
1.7.11.1.104.ge7b44f1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
