From: Greg KH <gre...@linuxfoundation.org> 3.4-stable review patch. If anyone has any objections, please let me know.
------------------ From: Andrew Lunn <and...@lunn.ch> commit 0fa1f0609a0c1fe8b2be3c0089a2cb48f7fda521 upstream. The orion watchdog is expecting to be passed the physcial address of the hardware, and will ioremap() it to give a virtual address it will use as the base address for the hardware. However, when creating the platform resource record, a virtual address was being used. Add the necassary #define's so we can pass the physical address as expected. Tested on Kirkwood and Orion5x. Signed-off-by: Andrew Lunn <and...@lunn.ch> Signed-off-by: Olof Johansson <o...@lixom.net> Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org> --- arch/arm/mach-kirkwood/include/mach/bridge-regs.h | 1 + arch/arm/mach-kirkwood/include/mach/kirkwood.h | 1 + arch/arm/mach-orion5x/include/mach/bridge-regs.h | 2 +- arch/arm/mach-orion5x/include/mach/orion5x.h | 1 + arch/arm/plat-orion/common.c | 2 +- 5 files changed, 5 insertions(+), 2 deletions(-) --- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h +++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h @@ -38,6 +38,7 @@ #define IRQ_MASK_HIGH_OFF 0x0014 #define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) +#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300) #define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128) #define L2_WRITETHROUGH 0x00000010 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h @@ -80,6 +80,7 @@ #define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100) #define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000) +#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x20000) #define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x30000) --- a/arch/arm/mach-orion5x/include/mach/bridge-regs.h +++ b/arch/arm/mach-orion5x/include/mach/bridge-regs.h @@ -35,5 +35,5 @@ #define MAIN_IRQ_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x204) #define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300) - +#define TIMER_PHYS_BASE (ORION5X_BRIDGE_PHYS_BASE | 0x300) #endif --- a/arch/arm/mach-orion5x/include/mach/orion5x.h +++ b/arch/arm/mach-orion5x/include/mach/orion5x.h @@ -82,6 +82,7 @@ #define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2100) #define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x20000) +#define ORION5X_BRIDGE_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x20000) #define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x30000) --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -570,7 +570,7 @@ void __init orion_spi_1_init(unsigned lo static struct orion_wdt_platform_data orion_wdt_data; static struct resource orion_wdt_resource = - DEFINE_RES_MEM(TIMER_VIRT_BASE, 0x28); + DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x28); static struct platform_device orion_wdt_device = { .name = "orion_wdt", -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/