On Wed, Jun 13, 2012 at 04:22:43PM +0800, Sonic Zhang wrote: > From: Sonic Zhang <sonic.zh...@analog.com> > > In order to mark I2C transfer fail when MEN bit in I2C controller is reset > unexpeced
"unexpected"
> in MCOMP interrupt, interrupt status bits XMTSERV or RCVSERV should be
> checked.
>
> Master Transfer Complete (MCOMP).
> [1] The initiated master transfer has completed. In the absence of a
> repeat start, the bus has been released.
> [0] The completion of a transfer has not been detected.
>
> Signed-off-by: Sonic Zhang <sonic.zh...@analog.com>
> ---
> drivers/i2c/busses/i2c-bfin-twi.c | 3 ++-
> 1 files changed, 2 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-bfin-twi.c
> b/drivers/i2c/busses/i2c-bfin-twi.c
> index a5ab454..2e59bbd 100644
> --- a/drivers/i2c/busses/i2c-bfin-twi.c
> +++ b/drivers/i2c/busses/i2c-bfin-twi.c
> @@ -201,7 +201,8 @@ static void bfin_twi_handle_interrupt(struct
> bfin_twi_iface *iface,
> return;
> }
> if (twi_int_status & MCOMP) {
> - if ((read_MASTER_CTL(iface) & MEN) == 0 &&
> + if (twi_int_status & (XMTSERV|RCVSERV) &&
Spaces around operators.
I fixed both for you.
> + (read_MASTER_CTL(iface) & MEN) == 0 &&
> (iface->cur_mode == TWI_I2C_MODE_REPEAT ||
> iface->cur_mode == TWI_I2C_MODE_COMBINED)) {
> iface->result = -1;
> --
> 1.7.0.4
>
>
--
Pengutronix e.K. | Wolfram Sang |
Industrial Linux Solutions | http://www.pengutronix.de/ |
signature.asc
Description: Digital signature
