The logic of calculating selector in palmas_map_voltage_smps() does not match the logic to list voltage in palmas_list_voltage_smps().
We use below equation to calculate voltage when selector > 0: voltage = (0.49V + (selector * 0.01V)) * RANGE RANGE is either x1 or x2 So we need to take into account with the multiplier set in VSEL register when calculating selector in palmas_map_voltage_smps() Signed-off-by: Axel Lin <axel....@gmail.com> --- drivers/regulator/palmas-regulator.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c index 7540c95..17d19fb 100644 --- a/drivers/regulator/palmas-regulator.c +++ b/drivers/regulator/palmas-regulator.c @@ -373,11 +373,22 @@ static int palmas_set_voltage_smps_sel(struct regulator_dev *dev, static int palmas_map_voltage_smps(struct regulator_dev *rdev, int min_uV, int max_uV) { + struct palmas_pmic *pmic = rdev_get_drvdata(rdev); + int id = rdev_get_id(rdev); int ret, voltage; - ret = ((min_uV - 500000) / 10000) + 1; - if (ret < 0) - return ret; + if (min_uV == 0) + return 0; + + if (pmic->range[id]) { /* RANGE is x2 */ + if (min_uV < 1000000) + min_uV = 1000000; + ret = DIV_ROUND_UP(min_uV - 1000000, 20000) + 1; + } else { /* RANGE is x1 */ + if (min_uV < 500000) + min_uV = 500000; + ret = DIV_ROUND_UP(min_uV - 500000, 10000) + 1; + } /* Map back into a voltage to verify we're still in bounds */ voltage = palmas_list_voltage_smps(rdev, ret); -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/