Hello,
I have the following problem with a DVD-RAM drive. The drive is a
Panasonic LF-D101 connected to a Tekram DC395U SCSI controller. Kernel is
2.2.18 with the patch for the Tekram controller
(http://www.garloff.de/kurt/linux/dc395/).
When I write huge amounts of data to a DVD-RAM the system load is
getting very high, like 10 or even above and the system temporarily freezes
for a short time every minute or so while writing data to the drive. The DVD
drive writes data with 1.35 MB/sec on the discs so there is not really much
data going over the SCSI controller. Reading data from DVD-RAMs is done with
2.7 MB/s (2x) by the drive and does not cause any problems at all.
This problem also existed with previous kernels (2.2.16/17) and with
another SCSI controller I had before the Tekram. Adaptec 2904CD using the
aic7xxx driver.
There is a 4x Teac burner connected to the SCSI controller as well.
Burning CDs does not raise the system load or cause any other problems.
Bye,
Oliver
--
Oliver Feiler [EMAIL PROTECTED]
http://www.lionking.org/~kiza/pgpkey PGP key ID: 0x561D4FD2
http://www.lionking.org/~kiza/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
