From: Mikhail Peselnik <pesel...@gmail.com>
This patch adds support for PL-2501 by adding the appropriate USB
ID's. This chip is used in several USB 'Easy Trasfer' Cables.
Tested-by: Mikhail Peselnik <pesel...@gmail.com>
---
plusb driver (drivers/net/usb/plusb.c) doesn't recognize PL2501 chip.
Since PL2501 uses the same code as PL2301/PL2302 (PL2501 works in compatibility
mode with PL2301/PL2302), the fix is trivial and attached as a patch.
Just to note: the patch is not mine, it can be found here and there on
Internet.
I've tested the patch and it works great.
Thank you.
--- linux-3.5/drivers/net/usb/plusb.c.orig 2012-07-22 21:06:41.905802795
+0400
+++ linux-3.5/drivers/net/usb/plusb.c 2012-07-22 21:07:00.345552404 +0400
@@ -107,7 +107,7 @@ static int pl_reset(struct usbnet *dev)
}
static const struct driver_info prolific_info = {
- .description = "Prolific PL-2301/PL-2302/PL-25A1",
+ .description = "Prolific PL-2301/PL-2302/PL-25A1/PL-2501",
.flags = FLAG_POINTTOPOINT | FLAG_NO_SETINT,
/* some PL-2302 versions seem to fail usb_set_interface() */
.reset = pl_reset,
@@ -139,6 +139,9 @@ static const struct usb_device_id produc
}, {
USB_DEVICE(0x050d, 0x258a), /* Belkin F5U258/F5U279 (PL-25A1) */
.driver_info = (unsigned long) &prolific_info,
+}, {
+ USB_DEVICE(0x067b, 0x2501), /* PL-2501 */
+ .driver_info = (unsigned long) &prolific_info,
},
{ }, // END
@@ -158,5 +161,5 @@ static struct usb_driver plusb_driver =
module_usb_driver(plusb_driver);
MODULE_AUTHOR("David Brownell");
-MODULE_DESCRIPTION("Prolific PL-2301/2302/25A1 USB Host to Host Link Driver");
+MODULE_DESCRIPTION("Prolific PL-2301/2302/25A1/2501 USB Host to Host Link
Driver");
MODULE_LICENSE("GPL");
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
