I did some grepping for words that are often misspelled, and the below
patch is the result of that. The patch fixes a large number of spelling
errors (64 in total.) The changes that have been made (in many places)
are these:
adress --> address
adressed --> addressed
adressing --> addressing
adresses --> addresses
subadress --> subaddress
aquire --> acquire
garantee --> guarantee
existant --> existent
existance --> existence
frist --> first
desiderable --> desirable
The patch is against 2.4.1-ac4.
diff -ur linux-2.4.1-ac4/Documentation/isdn/INTERFACE
linux/Documentation/isdn/INTERFACE
--- linux-2.4.1-ac4/Documentation/isdn/INTERFACE Thu Aug 26 00:18:07 1999
+++ linux/Documentation/isdn/INTERFACE Wed Feb 7 00:00:06 2001
@@ -480,7 +480,7 @@
Parameter:
driver = driver-Id
command = ISDN_CMD_PROT_IO
- arg = The lower 8 Bits define the adressed protocol as defined
+ arg = The lower 8 Bits define the addressed protocol as defined
in ISDN_PTYPE..., the upper bits are used to differenciate
the protocol specific CMD.
@@ -734,7 +734,7 @@
Parameter:
driver = driver-Id
command = ISDN_STAT_PROT
- arg = The lower 8 Bits define the adressed protocol as defined
+ arg = The lower 8 Bits define the addressed protocol as defined
in ISDN_PTYPE..., the upper bits are used to differenciate
the protocol specific STAT.
diff -ur linux-2.4.1-ac4/Documentation/s390/cds.txt linux/Documentation/s390/cds.txt
--- linux-2.4.1-ac4/Documentation/s390/cds.txt Thu Oct 12 23:19:31 2000
+++ linux/Documentation/s390/cds.txt Wed Feb 7 00:00:06 2001
@@ -549,7 +549,7 @@
typedef struct {
char cmd_code; /* command code */
- char flags; /* flags, like IDA adressing, etc. */
+ char flags; /* flags, like IDA addressing, etc. */
unsigned short count; /* byte count */
void *cda; /* data address */
} ccw1_t __attribute__ ((aligned(8)));
diff -ur linux-2.4.1-ac4/arch/alpha/kernel/smp.c linux/arch/alpha/kernel/smp.c
--- linux-2.4.1-ac4/arch/alpha/kernel/smp.c Wed Jan 3 01:45:37 2001
+++ linux/arch/alpha/kernel/smp.c Wed Feb 7 00:00:06 2001
@@ -837,7 +837,7 @@
atomic_set(&data.unstarted_count, smp_num_cpus - 1);
atomic_set(&data.unfinished_count, smp_num_cpus - 1);
- /* Aquire the smp_call_function_data mutex. */
+ /* Acquire the smp_call_function_data mutex. */
if (pointer_lock(&smp_call_function_data, &data, retry))
return -EBUSY;
diff -ur linux-2.4.1-ac4/arch/cris/boot/compressed/misc.c
linux/arch/cris/boot/compressed/misc.c
--- linux-2.4.1-ac4/arch/cris/boot/compressed/misc.c Wed Feb 7 00:02:53 2001
+++ linux/arch/cris/boot/compressed/misc.c Wed Feb 7 00:00:06 2001
@@ -13,7 +13,7 @@
*/
/* where the piggybacked kernel image expects itself to live.
- * it is the same adress we use when we network load an uncompressed
+ * it is the same address we use when we network load an uncompressed
* image into DRAM, and it is the address the kernel is linked to live
* at by etrax100.ld.
*/
diff -ur linux-2.4.1-ac4/arch/cris/cris.ld linux/arch/cris/cris.ld
--- linux-2.4.1-ac4/arch/cris/cris.ld Wed Feb 7 00:02:53 2001
+++ linux/arch/cris/cris.ld Wed Feb 7 00:00:06 2001
@@ -55,7 +55,7 @@
___initcall_start = .;
.initcall.init : { *(.initcall.init) }
___initcall_end = .;
- __vmlinux_end = .; /* last adress of the physical file */
+ __vmlinux_end = .; /* last address of the physical file */
. = ALIGN(8192);
___init_end = .;
diff -ur linux-2.4.1-ac4/arch/cris/drivers/ethernet.c
linux/arch/cris/drivers/ethernet.c
--- linux-2.4.1-ac4/arch/cris/drivers/ethernet.c Wed Feb 7 00:02:53 2001
+++ linux/arch/cris/drivers/ethernet.c Wed Feb 7 00:00:06 2001
@@ -273,7 +273,7 @@
return 0;
}
-/* set MAC adress of the interface. called from the core after a
+/* set MAC address of the interface. called from the core after a
* SIOCSIFADDR ioctl, and from the bootup above.
*/
@@ -288,7 +288,7 @@
memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
/* Write it to the hardware.
- * Note the way the adress is wrapped:
+ * Note the way the address is wrapped:
* *R_NETWORK_SA_0 = a0_0 | (a0_1 << 8) | (a0_2 << 16) | (a0_3 << 24);
* *R_NETWORK_SA_1 = a0_4 | (a0_5 << 8);
*/
diff -ur linux-2.4.1-ac4/arch/i386/mm/fault.c linux/arch/i386/mm/fault.c
--- linux-2.4.1-ac4/arch/i386/mm/fault.c Sun Nov 12 04:01:11 2000
+++ linux/arch/i386/mm/fault.c Wed Feb 7 00:00:06 2001
@@ -81,7 +81,7 @@
/*
* Unlock any spinlocks which will prevent us from getting the
- * message out (timerlist_lock is aquired through the
+ * message out (timerlist_lock is acquired through the
* console unblank code)
*/
void bust_spinlocks(void)
diff -ur linux-2.4.1-ac4/arch/ia64/kernel/process.c linux/arch/ia64/kernel/process.c
--- linux-2.4.1-ac4/arch/ia64/kernel/process.c Thu Jan 4 21:50:17 2001
+++ linux/arch/ia64/kernel/process.c Wed Feb 7 00:00:06 2001
@@ -542,7 +542,7 @@
* context for the last time. There is a possible race
* condition in SMP mode between the child and the
* parent. by explicitly saving the PMU context here
- * we garantee no race. this call we also stop
+ * we guarantee no race. this call we also stop
* monitoring
*/
ia64_save_pm_regs(current);
diff -ur linux-2.4.1-ac4/arch/ia64/sn/io/pci_bus_cvlink.c
linux/arch/ia64/sn/io/pci_bus_cvlink.c
--- linux-2.4.1-ac4/arch/ia64/sn/io/pci_bus_cvlink.c Fri Jan 5 00:25:55 2001
+++ linux/arch/ia64/sn/io/pci_bus_cvlink.c Wed Feb 7 00:00:06 2001
@@ -114,9 +114,9 @@
pci_bus = pci_bus_to_vertex(busnum);
if (!pci_bus) {
/*
- * During probing, the Linux pci code invents non existant
+ * During probing, the Linux pci code invents non existent
* bus numbers and pci_dev structures and tries to access
- * them to determine existance. Don't crib during probing.
+ * them to determine existence. Don't crib during probing.
*/
if (done_probing)
printk("devfn_to_vertex: Invalid bus number %d given.\n",
busnum);
diff -ur linux-2.4.1-ac4/arch/ia64/sn/io/pcibr.c linux/arch/ia64/sn/io/pcibr.c
--- linux-2.4.1-ac4/arch/ia64/sn/io/pcibr.c Wed Feb 7 00:02:55 2001
+++ linux/arch/ia64/sn/io/pcibr.c Wed Feb 7 00:00:06 2001
@@ -8609,7 +8609,7 @@
BRIDGE_ERRUPPR_ADDRMASK) << 32)));
/*
- * need to ensure that the xtalk adress in ioe
+ * need to ensure that the xtalk address in ioe
* maps to PCI error address read from bridge.
* How to convert PCI address back to Xtalk address ?
* (better idea: convert XTalk address to PCI address
diff -ur linux-2.4.1-ac4/arch/mips64/mm/fault.c linux/arch/mips64/mm/fault.c
--- linux-2.4.1-ac4/arch/mips64/mm/fault.c Wed Nov 29 06:42:04 2000
+++ linux/arch/mips64/mm/fault.c Wed Feb 7 00:00:07 2001
@@ -61,7 +61,7 @@
/*
* Unlock any spinlocks which will prevent us from getting the
- * message out (timerlist_lock is aquired through the
+ * message out (timerlist_lock is acquired through the
* console unblank code)
*/
void bust_spinlocks(void)
diff -ur linux-2.4.1-ac4/arch/parisc/kernel/semaphore.c
linux/arch/parisc/kernel/semaphore.c
--- linux-2.4.1-ac4/arch/parisc/kernel/semaphore.c Wed Feb 7 00:02:58 2001
+++ linux/arch/parisc/kernel/semaphore.c Wed Feb 7 00:00:07 2001
@@ -187,7 +187,7 @@
while (atomic_read(&sem->count) < 0) {
set_task_state(current, TASK_UNINTERRUPTIBLE);
if (atomic_read(&sem->count) >= 0)
- break; /* we must attempt to aquire or bias the lock */
+ break; /* we must attempt to acquire or bias the lock */
schedule();
}
diff -ur linux-2.4.1-ac4/arch/sparc/kernel/ioport.c linux/arch/sparc/kernel/ioport.c
--- linux-2.4.1-ac4/arch/sparc/kernel/ioport.c Mon Dec 11 21:37:02 2000
+++ linux/arch/sparc/kernel/ioport.c Wed Feb 7 00:00:07 2001
@@ -225,7 +225,7 @@
* XXX Playing with implementation details here.
* On sparc64 Ebus has resources with precise boundaries.
* We share drivers with sparc64. Too clever drivers use
- * start of a resource instead of a base adress.
+ * start of a resource instead of a base address.
*
* XXX-2 This may be not valid anymore, clean when
* interface to sbus_ioremap() is resolved.
diff -ur linux-2.4.1-ac4/drivers/block/cciss.c linux/drivers/block/cciss.c
--- linux-2.4.1-ac4/drivers/block/cciss.c Wed Feb 7 00:03:05 2001
+++ linux/drivers/block/cciss.c Wed Feb 7 00:00:07 2001
@@ -1053,7 +1053,7 @@
printk(KERN_WARNING "cciss: fifo full \n");
return;
}
- /* Get the frist entry from the Request Q */
+ /* Get the first entry from the Request Q */
removeQ(&(h->reqQ), c);
h->Qdepth--;
diff -ur linux-2.4.1-ac4/drivers/block/rd.c linux/drivers/block/rd.c
--- linux-2.4.1-ac4/drivers/block/rd.c Wed Feb 7 00:03:06 2001
+++ linux/drivers/block/rd.c Wed Feb 7 00:00:07 2001
@@ -110,7 +110,7 @@
*/
int rd_size = CONFIG_BLK_DEV_RAM_SIZE; /* Size of the RAM disks */
/*
- * It would be very desiderable to have a soft-blocksize (that in the case
+ * It would be very desirable to have a soft-blocksize (that in the case
* of the ramdisk driver is also the hardblocksize ;) of PAGE_SIZE because
* doing that we'll achieve a far better MM footprint. Using a rd_blocksize of
* BLOCK_SIZE in the worst case we'll make PAGE_SIZE/BLOCK_SIZE buffer-pages
diff -ur linux-2.4.1-ac4/drivers/char/serial.c linux/drivers/char/serial.c
--- linux-2.4.1-ac4/drivers/char/serial.c Wed Feb 7 00:03:09 2001
+++ linux/drivers/char/serial.c Wed Feb 7 00:00:07 2001
@@ -5123,7 +5123,7 @@
* Given a complete unknown ISA PnP device, try to use some heuristics to
* detect modems. Currently use such heuristic set:
* - dev->name or dev->bus->name must contain "modem" substring;
- * - device must have only one IO region (8 byte long) with base adress
+ * - device must have only one IO region (8 byte long) with base address
* 0x2e8, 0x3e8, 0x2f8 or 0x3f8.
*
* Such detection looks very ugly, but can detect at least some of numerous
diff -ur linux-2.4.1-ac4/drivers/char/synclink.c linux/drivers/char/synclink.c
--- linux-2.4.1-ac4/drivers/char/synclink.c Tue Nov 7 19:36:42 2000
+++ linux/drivers/char/synclink.c Wed Feb 7 00:00:07 2001
@@ -1717,7 +1717,7 @@
/* Allocate and claim adapter resources */
retval = mgsl_claim_resources(info);
- /* perform existance check and diagnostics */
+ /* perform existence check and diagnostics */
if ( !retval )
retval = mgsl_adapter_test(info);
diff -ur linux-2.4.1-ac4/drivers/gsc/busdevice.c linux/drivers/gsc/busdevice.c
--- linux-2.4.1-ac4/drivers/gsc/busdevice.c Wed Feb 7 00:03:10 2001
+++ linux/drivers/gsc/busdevice.c Wed Feb 7 00:00:07 2001
@@ -74,7 +74,7 @@
/* See if this Device belongs to a LASI/ASP/WAX we know about */
/* deller: Changed to test only the 3 highest nibbles of the
address-range, since ASP uses hpa of 0xf080yyyy, but devices are
- at adress 0xf082yyyy ! */
+ at address 0xf082yyyy ! */
while (busdev &&
(((unsigned long) busdev->hpa & ~0xfffff) != ((unsigned long) dev->hpa
& ~0xfffff)))
{
diff -ur linux-2.4.1-ac4/drivers/isdn/act2000/capi.h linux/drivers/isdn/act2000/capi.h
--- linux-2.4.1-ac4/drivers/isdn/act2000/capi.h Fri Nov 17 20:16:20 2000
+++ linux/drivers/isdn/act2000/capi.h Wed Feb 7 00:00:07 2001
@@ -44,7 +44,7 @@
char *description;
} actcapi_msgdsc;
-/* CAPI Adress */
+/* CAPI Address */
typedef struct actcapi_addr {
__u8 len; /* Length of element */
__u8 tnp; /* Type/Numbering Plan */
diff -ur linux-2.4.1-ac4/drivers/isdn/eicon/idi.h linux/drivers/isdn/eicon/idi.h
--- linux-2.4.1-ac4/drivers/isdn/eicon/idi.h Mon Dec 11 22:21:41 2000
+++ linux/drivers/isdn/eicon/idi.h Wed Feb 7 00:00:07 2001
@@ -65,7 +65,7 @@
struct postcall_s {
word command; /* command = 0x0300 */
word dummy; /* not used */
- IDI_CALL callback; /* routine adress to call back */
+ IDI_CALL callback; /* routine address to call back */
ENTITY *contxt; /* ptr to entity to use */
};
diff -ur linux-2.4.1-ac4/drivers/isdn/hisax/l3dss1.c linux/drivers/isdn/hisax/l3dss1.c
--- linux-2.4.1-ac4/drivers/isdn/hisax/l3dss1.c Wed Feb 7 00:03:18 2001
+++ linux/drivers/isdn/hisax/l3dss1.c Wed Feb 7 00:00:08 2001
@@ -2112,7 +2112,7 @@
MsgHead(p, pc->callref, MT_FACILITY);
for (subp = pc->chan->setup.phone; (*subp) && (*subp != '.'); subp++)
len_phone++; /* len of phone number */
- if (*subp++ == '.') len_sub = strlen(subp) + 2; /* length including info
subadress element */
+ if (*subp++ == '.') len_sub = strlen(subp) + 2; /* length including info
+subaddress element */
*p++ = 0x1c; /* Facility info element */
*p++ = len_phone + len_sub + 2 + 2 + 8 + 3 + 3; /* length of element */
@@ -2138,7 +2138,7 @@
*p++ = pc->chan->setup.phone[l];
if (len_sub)
- { *p++ = 0x04; /* called party subadress */
+ { *p++ = 0x04; /* called party subaddress */
*p++ = len_sub - 2;
while (*subp) *p++ = *subp++;
}
diff -ur linux-2.4.1-ac4/drivers/isdn/hisax/l3ni1.c linux/drivers/isdn/hisax/l3ni1.c
--- linux-2.4.1-ac4/drivers/isdn/hisax/l3ni1.c Wed Feb 7 00:03:18 2001
+++ linux/drivers/isdn/hisax/l3ni1.c Wed Feb 7 00:00:08 2001
@@ -1973,7 +1973,7 @@
MsgHead(p, pc->callref, MT_FACILITY);
for (subp = pc->chan->setup.phone; (*subp) && (*subp != '.'); subp++)
len_phone++; /* len of phone number */
- if (*subp++ == '.') len_sub = strlen(subp) + 2; /* length including info
subadress element */
+ if (*subp++ == '.') len_sub = strlen(subp) + 2; /* length including info
+subaddress element */
*p++ = 0x1c; /* Facility info element */
*p++ = len_phone + len_sub + 2 + 2 + 8 + 3 + 3; /* length of element */
@@ -1999,7 +1999,7 @@
*p++ = pc->chan->setup.phone[l];
if (len_sub)
- { *p++ = 0x04; /* called party subadress */
+ { *p++ = 0x04; /* called party subaddress */
*p++ = len_sub - 2;
while (*subp) *p++ = *subp++;
}
diff -ur linux-2.4.1-ac4/drivers/isdn/icn/icn.h linux/drivers/isdn/icn/icn.h
--- linux-2.4.1-ac4/drivers/isdn/icn/icn.h Mon Dec 11 22:21:14 2000
+++ linux/drivers/isdn/icn/icn.h Wed Feb 7 00:00:08 2001
@@ -217,9 +217,9 @@
#ifdef MODULE
MODULE_AUTHOR("Fritz Elfert");
MODULE_PARM(portbase, "i");
-MODULE_PARM_DESC(portbase, "Port adress of first card");
+MODULE_PARM_DESC(portbase, "Port address of first card");
MODULE_PARM(membase, "i");
-MODULE_PARM_DESC(membase, "Shared memory adress of all cards");
+MODULE_PARM_DESC(membase, "Shared memory address of all cards");
MODULE_PARM(icn_id, "s");
MODULE_PARM_DESC(icn_id, "ID-String of first card");
MODULE_PARM(icn_id2, "s");
diff -ur linux-2.4.1-ac4/drivers/media/video/tvaudio.c
linux/drivers/media/video/tvaudio.c
--- linux-2.4.1-ac4/drivers/media/video/tvaudio.c Tue Dec 5 21:43:47 2000
+++ linux/drivers/media/video/tvaudio.c Wed Feb 7 00:00:08 2001
@@ -123,7 +123,7 @@
/* ---------------------------------------------------------------------- */
-/* i2c adresses */
+/* i2c addresses */
static unsigned short normal_i2c[] = {
I2C_TDA8425 >> 1,
diff -ur linux-2.4.1-ac4/drivers/net/irda/irport.c linux/drivers/net/irda/irport.c
--- linux-2.4.1-ac4/drivers/net/irda/irport.c Mon Nov 13 05:43:07 2000
+++ linux/drivers/net/irda/irport.c Wed Feb 7 00:00:08 2001
@@ -1006,7 +1006,7 @@
#ifdef MODULE
MODULE_PARM(io, "1-4i");
-MODULE_PARM_DESC(io, "Base I/O adresses");
+MODULE_PARM_DESC(io, "Base I/O addresses");
MODULE_PARM(irq, "1-4i");
MODULE_PARM_DESC(irq, "IRQ lines");
diff -ur linux-2.4.1-ac4/drivers/net/skfp/drvfbi.c linux/drivers/net/skfp/drvfbi.c
--- linux-2.4.1-ac4/drivers/net/skfp/drvfbi.c Mon Mar 13 04:11:17 2000
+++ linux/drivers/net/skfp/drvfbi.c Wed Feb 7 00:00:08 2001
@@ -849,7 +849,7 @@
#ifdef EISA
-/*arrays with io adresses of dma controller length and adress registers*/
+/*arrays with io addresses of dma controller length and address registers*/
static const int cntr[8] = { 0x001,0x003,0x005,0x007,0,0x0c6,0x0ca,0x0ce } ;
static const int base[8] = { 0x000,0x002,0x004,0x006,0,0x0c4,0x0c8,0x0cc } ;
static const int page[8] = { 0x087,0x083,0x081,0x082,0,0x08b,0x089,0x08a } ;
diff -ur linux-2.4.1-ac4/drivers/net/skfp/hwmtm.c linux/drivers/net/skfp/hwmtm.c
--- linux-2.4.1-ac4/drivers/net/skfp/hwmtm.c Fri May 12 20:43:26 2000
+++ linux/drivers/net/skfp/hwmtm.c Wed Feb 7 00:00:08 2001
@@ -688,7 +688,7 @@
* interrupt service routine, handles the interrupt requests
* generated by the FDDI adapter.
*
- * NOTE: The operating system dependent module must garantee that the
+ * NOTE: The operating system dependent module must guarantee that the
* interrupts of the adapter are disabled when it calls fddi_isr.
*
* About the USE_BREAK_ISR mechanismn:
diff -ur linux-2.4.1-ac4/drivers/parport/parport_pc.c
linux/drivers/parport/parport_pc.c
--- linux-2.4.1-ac4/drivers/parport/parport_pc.c Wed Feb 7 00:03:43 2001
+++ linux/drivers/parport/parport_pc.c Wed Feb 7 00:00:08 2001
@@ -1426,7 +1426,7 @@
/*
* Checks for port existence, all ports support SPP MODE
* Returns:
- * 0 : No parallel port at this adress
+ * 0 : No parallel port at this address
* PARPORT_MODE_PCSPP : SPP port detected
* (if the user specified an ioport himself,
* this shall always be the case!)
diff -ur linux-2.4.1-ac4/drivers/sbus/char/envctrl.c linux/drivers/sbus/char/envctrl.c
--- linux-2.4.1-ac4/drivers/sbus/char/envctrl.c Fri Nov 10 00:57:41 2000
+++ linux/drivers/sbus/char/envctrl.c Wed Feb 7 00:00:08 2001
@@ -229,7 +229,7 @@
printk(KERN_INFO "envctrl: Busy bit will not clear.\n");
}
-/* Function Description: Send the adress for a read access.
+/* Function Description: Send the address for a read access.
* Return : 0 if not acknowledged, otherwise acknowledged.
*/
static int envctrl_i2c_read_addr(unsigned char addr)
@@ -255,7 +255,7 @@
}
}
-/* Function Description: Send the adress for write mode.
+/* Function Description: Send the address for write mode.
* Return : None.
*/
static void envctrl_i2c_write_addr(unsigned char addr)
diff -ur linux-2.4.1-ac4/drivers/scsi/megaraid.c linux/drivers/scsi/megaraid.c
--- linux-2.4.1-ac4/drivers/scsi/megaraid.c Mon Feb 5 21:00:32 2001
+++ linux/drivers/scsi/megaraid.c Wed Feb 7 00:00:08 2001
@@ -1263,7 +1263,7 @@
}
/*--------------------------------------------------------------------
- * Initializes the adress of the controller's mailbox register
+ * Initializes the address of the controller's mailbox register
* The mailbox register is used to issue commands to the card.
* Format of the mailbox area:
* 00 01 command
diff -ur linux-2.4.1-ac4/drivers/scsi/ncr53c8xx.c linux/drivers/scsi/ncr53c8xx.c
--- linux-2.4.1-ac4/drivers/scsi/ncr53c8xx.c Mon Sep 18 22:36:25 2000
+++ linux/drivers/scsi/ncr53c8xx.c Wed Feb 7 00:00:09 2001
@@ -7706,7 +7706,7 @@
/*==========================================================
**
**
-** Aquire a control block
+** Acquire a control block
**
**
**==========================================================
diff -ur linux-2.4.1-ac4/drivers/scsi/sym53c8xx.c linux/drivers/scsi/sym53c8xx.c
--- linux-2.4.1-ac4/drivers/scsi/sym53c8xx.c Mon Jan 1 19:23:21 2001
+++ linux/drivers/scsi/sym53c8xx.c Wed Feb 7 00:00:09 2001
@@ -1465,7 +1465,7 @@
#endif
/*
-** If the CPU and the NCR use same endian-ness adressing,
+** If the CPU and the NCR use same endian-ness addressing,
** no byte reordering is needed for script patching.
** Macro cpu_to_scr() is to be used for script patching.
** Macro scr_to_cpu() is to be used for getting a DWORD
@@ -1504,7 +1504,7 @@
*/
/*
-** If the CPU and the NCR use same endian-ness adressing,
+** If the CPU and the NCR use same endian-ness addressing,
** no byte reordering is needed for accessing chip io
** registers. Functions suffixed by '_raw' are assumed
** to access the chip over the PCI without doing byte
@@ -8961,7 +8961,7 @@
** scntl3: (see the manual)
**
** current script command:
-** dsp: script adress (relative to start of script).
+** dsp: script address (relative to start of script).
** dbc: first word of script command.
**
** First 24 register of the chip:
@@ -11869,7 +11869,7 @@
/*==========================================================
**
**
-** Aquire a control block
+** Acquire a control block
**
**
**==========================================================
diff -ur linux-2.4.1-ac4/drivers/scsi/sym53c8xx_comm.h
linux/drivers/scsi/sym53c8xx_comm.h
--- linux-2.4.1-ac4/drivers/scsi/sym53c8xx_comm.h Mon Oct 16 21:56:50 2000
+++ linux/drivers/scsi/sym53c8xx_comm.h Wed Feb 7 00:00:11 2001
@@ -1115,7 +1115,7 @@
** Btw, ncr_offb() and ncr_offw() macros only apply to
** constants and so donnot generate bloated code.
**
-** If the CPU and the NCR use same endian-ness adressing,
+** If the CPU and the NCR use same endian-ness addressing,
** no byte reordering is needed for script patching.
** Macro cpu_to_scr() is to be used for script patching.
** Macro scr_to_cpu() is to be used for getting a DWORD
@@ -1164,7 +1164,7 @@
** would have been correctly designed for PCI, this
** option would be useless.
**
-** If the CPU and the NCR use same endian-ness adressing,
+** If the CPU and the NCR use same endian-ness addressing,
** no byte reordering is needed for accessing chip io
** registers. Functions suffixed by '_raw' are assumed
** to access the chip over the PCI without doing byte
diff -ur linux-2.4.1-ac4/drivers/video/imsttfb.c linux/drivers/video/imsttfb.c
--- linux-2.4.1-ac4/drivers/video/imsttfb.c Sat Aug 5 03:06:34 2000
+++ linux/drivers/video/imsttfb.c Wed Feb 7 00:00:11 2001
@@ -178,10 +178,10 @@
/* TI TVP 3030 RAMDAC Direct Registers */
enum {
- TVPADDRW = 0x00, /* 0 Palette/Cursor RAM Write Adress/Index */
+ TVPADDRW = 0x00, /* 0 Palette/Cursor RAM Write Address/Index */
TVPPDATA = 0x04, /* 1 Palette Data RAM Data */
TVPPMASK = 0x08, /* 2 Pixel Read-Mask */
- TVPPADRR = 0x0c, /* 3 Palette/Cursor RAM Read Adress */
+ TVPPADRR = 0x0c, /* 3 Palette/Cursor RAM Read Address */
TVPCADRW = 0x10, /* 4 Cursor/Overscan Color Write Address */
TVPCDATA = 0x14, /* 5 Cursor/Overscan Color Data */
/* 6 reserved */
diff -ur linux-2.4.1-ac4/include/asm-cris/ide.h linux/include/asm-cris/ide.h
--- linux-2.4.1-ac4/include/asm-cris/ide.h Wed Feb 7 00:04:12 2001
+++ linux/include/asm-cris/ide.h Wed Feb 7 00:00:11 2001
@@ -129,7 +129,7 @@
#define ide_release_lock(lock) do {} while (0)
#define ide_get_lock(lock, hdlr, data) do {} while (0)
-/* the drive adressing is done through a controller register on the Etrax CPU */
+/* the drive addressing is done through a controller register on the Etrax CPU */
void OUT_BYTE(unsigned char data, ide_ioreg_t reg);
unsigned char IN_BYTE(ide_ioreg_t reg);
diff -ur linux-2.4.1-ac4/include/asm-cris/page.h linux/include/asm-cris/page.h
--- linux-2.4.1-ac4/include/asm-cris/page.h Wed Feb 7 00:04:12 2001
+++ linux/include/asm-cris/page.h Wed Feb 7 00:00:11 2001
@@ -100,7 +100,7 @@
/* to index into the page map. our pages all start at physical addr PAGE_OFFSET so
* we can let the map start there. notice that we subtract PAGE_OFFSET because
* we start our mem_map there - in other ports they map mem_map physically and
- * use __pa instead. in our system both the physical and virtual adress of DRAM
+ * use __pa instead. in our system both the physical and virtual address of DRAM
* is too high to let mem_map start at 0, so we do it this way instead (similar
* to arm and m68k I think)
*/
diff -ur linux-2.4.1-ac4/include/asm-i386/highmem.h linux/include/asm-i386/highmem.h
--- linux-2.4.1-ac4/include/asm-i386/highmem.h Wed Feb 7 00:04:13 2001
+++ linux/include/asm-i386/highmem.h Wed Feb 7 00:00:11 2001
@@ -2,7 +2,7 @@
* highmem.h: virtual kernel memory mappings for high memory
*
* Used in CONFIG_HIGHMEM systems for memory pages which
- * are not addressable by direct kernel virtual adresses.
+ * are not addressable by direct kernel virtual addresses.
*
* Copyright (C) 1999 Gerhard Wichert, Siemens AG
* [EMAIL PROTECTED]
diff -ur linux-2.4.1-ac4/include/asm-ia64/sn/pci/pcibr.h
linux/include/asm-ia64/sn/pci/pcibr.h
--- linux-2.4.1-ac4/include/asm-ia64/sn/pci/pcibr.h Thu Jan 4 22:00:15 2001
+++ linux/include/asm-ia64/sn/pci/pcibr.h Wed Feb 7 00:00:12 2001
@@ -47,7 +47,7 @@
* These functions are normal device driver entry points
* and are called along with the similar entry points from
* other device drivers. They are included here as documentation
- * of their existance and purpose.
+ * of their existence and purpose.
*
* pcibr_init() is called to inform us that there is a pcibr driver
* configured into the kernel; it is responsible for registering
diff -ur linux-2.4.1-ac4/include/asm-parisc/hardware.h
linux/include/asm-parisc/hardware.h
--- linux-2.4.1-ac4/include/asm-parisc/hardware.h Wed Feb 7 00:04:13 2001
+++ linux/include/asm-parisc/hardware.h Wed Feb 7 00:00:12 2001
@@ -10,7 +10,7 @@
};
-#define MAX_ADD_ADDRS 5 /* 5 additional adress ranges should be sufficient */
+#define MAX_ADD_ADDRS 5 /* 5 additional address ranges should be sufficient */
struct hp_device {
void *hpa;
diff -ur linux-2.4.1-ac4/include/asm-parisc/pdc.h linux/include/asm-parisc/pdc.h
--- linux-2.4.1-ac4/include/asm-parisc/pdc.h Wed Feb 7 00:04:13 2001
+++ linux/include/asm-parisc/pdc.h Wed Feb 7 00:00:12 2001
@@ -215,7 +215,7 @@
#ifdef __LP64__
cc_padW:32,
#endif
- cc_alias:4, /* alias boundaries for virtual adresses */
+ cc_alias:4, /* alias boundaries for virtual addresses */
cc_block: 4, /* to determine most efficient stride */
cc_line : 3, /* maximum amount written back as a result of store
(multiple of 16 bytes) */
cc_pad0 : 2, /* reserved */
diff -ur linux-2.4.1-ac4/include/asm-ppc/highmem.h linux/include/asm-ppc/highmem.h
--- linux-2.4.1-ac4/include/asm-ppc/highmem.h Thu Nov 9 04:01:34 2000
+++ linux/include/asm-ppc/highmem.h Wed Feb 7 00:00:12 2001
@@ -4,7 +4,7 @@
* PowerPC version, stolen from the i386 version.
*
* Used in CONFIG_HIGHMEM systems for memory pages which
- * are not addressable by direct kernel virtual adresses.
+ * are not addressable by direct kernel virtual addresses.
*
* Copyright (C) 1999 Gerhard Wichert, Siemens AG
* [EMAIL PROTECTED]
diff -ur linux-2.4.1-ac4/include/asm-ppc/tqm860.h linux/include/asm-ppc/tqm860.h
--- linux-2.4.1-ac4/include/asm-ppc/tqm860.h Sun Nov 12 03:23:11 2000
+++ linux/include/asm-ppc/tqm860.h Wed Feb 7 00:00:12 2001
@@ -28,7 +28,7 @@
unsigned long bi_immr_base; /* base of IMMR register */
unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */
unsigned long bi_ip_addr; /* IP Address */
- unsigned char bi_enetaddr[6]; /* Ethernet adress */
+ unsigned char bi_enetaddr[6]; /* Ethernet address */
unsigned char bi_reserved[2]; /* -- just for alignment -- */
unsigned long bi_putchar; /* Addr of monitor putchar() to Console */
unsigned long bi_intfreq; /* Internal Freq, in MHz */
diff -ur linux-2.4.1-ac4/include/asm-ppc/tqm8xxL.h linux/include/asm-ppc/tqm8xxL.h
--- linux-2.4.1-ac4/include/asm-ppc/tqm8xxL.h Sun Nov 12 03:23:11 2000
+++ linux/include/asm-ppc/tqm8xxL.h Wed Feb 7 00:00:12 2001
@@ -28,7 +28,7 @@
unsigned long bi_immr_base; /* base of IMMR register */
unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */
unsigned long bi_ip_addr; /* IP Address */
- unsigned char bi_enetaddr[6]; /* Ethernet adress */
+ unsigned char bi_enetaddr[6]; /* Ethernet address */
unsigned char bi_reserved[2]; /* -- just for alignment -- */
unsigned long bi_putchar; /* Addr of monitor putchar() to Console */
unsigned long bi_intfreq; /* Internal Freq, in MHz */
diff -ur linux-2.4.1-ac4/include/asm-s390/irq.h linux/include/asm-s390/irq.h
--- linux-2.4.1-ac4/include/asm-s390/irq.h Wed Feb 7 00:04:14 2001
+++ linux/include/asm-s390/irq.h Wed Feb 7 00:00:12 2001
@@ -186,7 +186,7 @@
typedef struct {
__u8 cmd_code;/* command code */
- __u8 flags; /* flags, like IDA adressing, etc. */
+ __u8 flags; /* flags, like IDA addressing, etc. */
__u16 count; /* byte count */
__u32 cda; /* data address */
} __attribute__ ((packed,aligned(8))) ccw1_t;
diff -ur linux-2.4.1-ac4/include/asm-s390x/irq.h linux/include/asm-s390x/irq.h
--- linux-2.4.1-ac4/include/asm-s390x/irq.h Wed Feb 7 00:04:15 2001
+++ linux/include/asm-s390x/irq.h Wed Feb 7 00:00:12 2001
@@ -186,7 +186,7 @@
typedef struct {
__u8 cmd_code;/* command code */
- __u8 flags; /* flags, like IDA adressing, etc. */
+ __u8 flags; /* flags, like IDA addressing, etc. */
__u16 count; /* byte count */
__u32 cda; /* data address */
} __attribute__ ((packed,aligned(8))) ccw1_t;
diff -ur linux-2.4.1-ac4/include/asm-sparc/highmem.h linux/include/asm-sparc/highmem.h
--- linux-2.4.1-ac4/include/asm-sparc/highmem.h Thu Nov 9 04:01:34 2000
+++ linux/include/asm-sparc/highmem.h Wed Feb 7 00:00:12 2001
@@ -2,7 +2,7 @@
* highmem.h: virtual kernel memory mappings for high memory
*
* Used in CONFIG_HIGHMEM systems for memory pages which
- * are not addressable by direct kernel virtual adresses.
+ * are not addressable by direct kernel virtual addresses.
*
* Copyright (C) 1999 Gerhard Wichert, Siemens AG
* [EMAIL PROTECTED]
diff -ur linux-2.4.1-ac4/include/linux/i2c.h linux/include/linux/i2c.h
--- linux-2.4.1-ac4/include/linux/i2c.h Fri Dec 29 23:35:47 2000
+++ linux/include/linux/i2c.h Wed Feb 7 00:00:12 2001
@@ -454,7 +454,7 @@
* corresponding header files.
*/
/* -> bit-adapter specific ioctls */
-#define I2C_RETRIES 0x0701 /* number times a device adress should */
+#define I2C_RETRIES 0x0701 /* number times a device address should */
/* be polled when not acknowledging */
#define I2C_TIMEOUT 0x0702 /* set timeout - call with int */
@@ -471,7 +471,7 @@
#define I2C_FUNCS 0x0705 /* Get the adapter functionality */
#define I2C_RDWR 0x0707 /* Combined R/W transfer (one stop only)*/
#if 0
-#define I2C_ACK_TEST 0x0710 /* See if a slave is at a specific adress */
+#define I2C_ACK_TEST 0x0710 /* See if a slave is at a specific address */
#endif
#define I2C_SMBUS 0x0720 /* SMBus-level access */
diff -ur linux-2.4.1-ac4/kernel/signal.c linux/kernel/signal.c
--- linux-2.4.1-ac4/kernel/signal.c Thu Jan 4 05:45:26 2001
+++ linux/kernel/signal.c Wed Feb 7 00:00:12 2001
@@ -519,7 +519,7 @@
if (bad_signal(sig, info, t))
goto out_nolock;
- /* The null signal is a permissions and process existance probe.
+ /* The null signal is a permissions and process existence probe.
No signal is actually delivered. Same goes for zombies. */
ret = 0;
if (!sig || !t->sig)
diff -ur linux-2.4.1-ac4/mm/filemap.c linux/mm/filemap.c
--- linux-2.4.1-ac4/mm/filemap.c Wed Feb 7 00:04:18 2001
+++ linux/mm/filemap.c Wed Feb 7 00:00:12 2001
@@ -1689,7 +1689,7 @@
unsigned long end = address + size;
int error = 0;
- /* Aquire the lock early; it may be possible to avoid dropping
+ /* Acquire the lock early; it may be possible to avoid dropping
* and reaquiring it repeatedly.
*/
spin_lock(&vma->vm_mm->page_table_lock);
diff -ur linux-2.4.1-ac4/mm/swapfile.c linux/mm/swapfile.c
--- linux-2.4.1-ac4/mm/swapfile.c Wed Feb 7 00:04:19 2001
+++ linux/mm/swapfile.c Wed Feb 7 00:00:12 2001
@@ -818,7 +818,7 @@
/*
* Verify that a swap entry is valid and increment its swap map count.
- * Kernel_lock is held, which guarantees existance of swap device.
+ * Kernel_lock is held, which guarantees existence of swap device.
*
* Note: if swap_map[] reaches SWAP_MAP_MAX the entries are treated as
* "permanent", but will be reclaimed by the next swapoff.
diff -ur linux-2.4.1-ac4/net/core/dev.c linux/net/core/dev.c
--- linux-2.4.1-ac4/net/core/dev.c Wed Feb 7 00:04:20 2001
+++ linux/net/core/dev.c Wed Feb 7 00:00:12 2001
@@ -429,7 +429,7 @@
/*
Return value is changed to int to prevent illegal usage in future.
- It is still legal to use to check for device existance.
+ It is still legal to use to check for device existence.
User should understand, that the result returned by this function
is meaningless, if it was not issued under rtnl semaphore.
--
André Dahlqvist <[EMAIL PROTECTED]>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
