Hi,
Just got a D-Link USB radio (R100) and I'm seeing lots of timeouts with
it. I've seen this through the last few 2.4.1+ and -ac+ kernels.
Current config:
Dual P3-500 w/ 512mb of RAM
Tyan Tiger 133 mobo with VIA chipset, onboard USB
Kernel 2.4.1-ac9 compiled with egcs-1.1.2
The only thing funky is that three devices are sharing an interrupt:
CPU0 CPU1
0: 216690 219652 IO-APIC-edge timer
1: 3564 3816 IO-APIC-edge keyboard
2: 0 0 XT-PIC cascade
3: 7 20 IO-APIC-edge serial
5: 1017 1135 IO-APIC-level EMU10K1
8: 0 1 IO-APIC-edge rtc
11: 22978 22756 IO-APIC-level aic7xxx, eth0, usb-uhci
12: 64220 63272 IO-APIC-edge PS/2 Mouse
14: 12132 12810 IO-APIC-edge ide0
15: 3 10 IO-APIC-edge ide1
NMI: 436327 436327
LOC: 436151 436128
ERR: 0
The ethernet card is a 3Com 3c905, the SCSI card is Adaptec 7892B (19160
card). No problems with either as far as I can tell, but one of these
modules may not be playing nice with interrupt sharing.
The messages:
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.251 $ time 17:33:47 Feb 9 2001
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
usb_control/bulk_msg: timeout
usb.c: USB device not accepting new address=2 (error=-110)
usb.c: USB device 3 (vend/prod 0x4b4/0x1002) is not claimed by any
active driver.
usb_control/bulk_msg: timeout
usb.c: error getting string descriptor 0 (error=-110)
usb_control/bulk_msg: timeout
usb.c: error getting string descriptor 0 (error=-110)
usb_control/bulk_msg: timeout
usb.c: error getting string descriptor 0 (error=-110)
usb_control/bulk_msg: timeout
usb.c: error getting string descriptor 0 (error=-110)
usb_control/bulk_msg: timeout
usb_control/bulk_msg: timeout
usb_control/bulk_msg: timeout
usb_control/bulk_msg: timeout
usb_control/bulk_msg: timeout
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
