The newly added dmaengine support in the omap2 nand driver potentially causes an undefined return value from the omap_nand_probe function when dmaengine_slave_config reports an error. Let's handle this by returning the same error back to the caller.
Without this patch, building omap2plus_defconfig results in: drivers/mtd/nand/omap2.c: In function 'omap_nand_probe': drivers/mtd/nand/omap2.c:1154:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Arnd Bergmann <a...@arndb.de> Cc: Russell King <rmk+ker...@arm.linux.org.uk> Cc: Grazvydas Ignotas <nota...@gmail.com> --- drivers/mtd/nand/omap2.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index e9309b3..ac4fd75 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -1245,7 +1245,6 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) goto out_release_mem_region; } else { struct dma_slave_config cfg; - int rc; memset(&cfg, 0, sizeof(cfg)); cfg.src_addr = info->phys_base; @@ -1254,10 +1253,10 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; cfg.src_maxburst = 16; cfg.dst_maxburst = 16; - rc = dmaengine_slave_config(info->dma, &cfg); - if (rc) { + err = dmaengine_slave_config(info->dma, &cfg); + if (err) { dev_err(&pdev->dev, "DMA engine slave config failed: %d\n", - rc); + err); goto out_release_mem_region; } info->nand.read_buf = omap_read_buf_dma_pref; -- 1.7.10 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/