Bindings for gpio, interrupt controller, power management controller,
timer, realtime clock, serial uart, ehci and uhci controllers and
framebuffer controllers used on the arch-vt8500 platform.
Framebuffer binding also specifies a 'display' node which is required
for determining the lcd panel data.
Signed-off-by: Tony Prisk <li...@prisktech.co.nz>
---
Documentation/devicetree/bindings/arm/vt8500.txt | 15 +++++++
.../bindings/arm/vt8500/via,vt8500-intc.txt | 16 +++++++
.../bindings/arm/vt8500/via,vt8500-pmc.txt | 13 ++++++
.../bindings/arm/vt8500/via,vt8500-timer.txt | 15 +++++++
.../devicetree/bindings/gpio/gpio_vt8500.txt | 24 ++++++++++
.../devicetree/bindings/rtc/via,vt8500-rtc.txt | 15 +++++++
.../bindings/tty/serial/via,vt8500-uart.txt | 15 +++++++
.../devicetree/bindings/usb/platform-uhci.txt | 15 +++++++
.../devicetree/bindings/usb/via,vt8500-ehci.txt | 15 +++++++
.../devicetree/bindings/vendor-prefixes.txt | 2 +
.../devicetree/bindings/video/via,vt8500-fb.txt | 46 ++++++++++++++++++++
.../devicetree/bindings/video/wm,prizm-ge-rops.txt | 13 ++++++
.../devicetree/bindings/video/wm,wm8505-fb.txt | 20 +++++++++
13 files changed, 224 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/vt8500.txt
create mode 100644
Documentation/devicetree/bindings/arm/vt8500/via,vt8500-intc.txt
create mode 100644
Documentation/devicetree/bindings/arm/vt8500/via,vt8500-pmc.txt
create mode 100644
Documentation/devicetree/bindings/arm/vt8500/via,vt8500-timer.txt
create mode 100644 Documentation/devicetree/bindings/gpio/gpio_vt8500.txt
create mode 100644 Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt
create mode 100644
Documentation/devicetree/bindings/tty/serial/via,vt8500-uart.txt
create mode 100644 Documentation/devicetree/bindings/usb/platform-uhci.txt
create mode 100644 Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt
create mode 100644 Documentation/devicetree/bindings/video/via,vt8500-fb.txt
create mode 100644 Documentation/devicetree/bindings/video/wm,prizm-ge-rops.txt
create mode 100644 Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
diff --git a/Documentation/devicetree/bindings/arm/vt8500.txt
b/Documentation/devicetree/bindings/arm/vt8500.txt
new file mode 100644
index 0000000..1b3b187
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/vt8500.txt
@@ -0,0 +1,15 @@
+VIA/Wondermedia VT8500 Platforms Device Tree Bindings
+---------------------------------------
+
+Boards with the VIA VT8500 SoC shall have the following properties:
+Required root node property:
+compatible = "via,vt8500";
+
+Boards with the Wondermedia WM8505 SoC shall have the following properties:
+Required root node property:
+compatible = "wm,wm8505";
+
+Boards with the Wondermedia WM8650 SoC shall have the following properties:
+Required root node property:
+compatible = "wm,wm8650";
+
diff --git a/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-intc.txt
b/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-intc.txt
new file mode 100644
index 0000000..0a4ce10
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-intc.txt
@@ -0,0 +1,16 @@
+VIA/Wondermedia VT8500 Interrupt Controller
+-----------------------------------------------------
+
+Required properties:
+- compatible : "via,vt8500-intc"
+- reg : Should contain 1 register ranges(address and length)
+- #interrupt-cells : should be <1>
+
+Example:
+
+ intc: interrupt-controller@d8140000 {
+ compatible = "via,vt8500-intc";
+ interrupt-controller;
+ reg = <0xd8140000 0x10000>;
+ #interrupt-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-pmc.txt
b/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-pmc.txt
new file mode 100644
index 0000000..521b9c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-pmc.txt
@@ -0,0 +1,13 @@
+VIA/Wondermedia VT8500 Power Management Controller
+-----------------------------------------------------
+
+Required properties:
+- compatible : "via,vt8500-pmc"
+- reg : Should contain 1 register ranges(address and length)
+
+Example:
+
+ pmc@d8130000 {
+ compatible = "via,vt8500-pmc";
+ reg = <0xd8130000 0x1000>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-timer.txt
b/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-timer.txt
new file mode 100644
index 0000000..901c73f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-timer.txt
@@ -0,0 +1,15 @@
+VIA/Wondermedia VT8500 Timer
+-----------------------------------------------------
+
+Required properties:
+- compatible : "via,vt8500-timer"
+- reg : Should contain 1 register ranges(address and length)
+- interrupts : interrupt for the timer
+
+Example:
+
+ timer@d8130100 {
+ compatible = "via,vt8500-timer";
+ reg = <0xd8130100 0x28>;
+ interrupts = <36>;
+ };
diff --git a/Documentation/devicetree/bindings/gpio/gpio_vt8500.txt
b/Documentation/devicetree/bindings/gpio/gpio_vt8500.txt
new file mode 100644
index 0000000..1a122bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio_vt8500.txt
@@ -0,0 +1,24 @@
+VIA/Wondermedia VT8500 GPIO Controller
+-----------------------------------------------------
+
+Required properties:
+- compatible : "via,vt8500-gpio", "wm,wm8505-gpio"
+ or "wm,wm8650-gpio" depending on your SoC
+- reg : Should contain 1 register range (address and length)
+- #gpio-cells : should be <3>.
+ 1) bank
+ 2) pin number
+ 3) flags
+
+Example:
+
+ gpio: gpio-controller@d8110000 {
+ compatible = "via,vt8500-gpio";
+ gpio-controller;
+ reg = <0xd8110000 0x10000>;
+ #gpio-cells = <3>;
+ };
+
+ vibrate {
+ gpios = <&gpio 0 1 0>; /* Bank 0, Pin 1, No flags */
+ };
diff --git a/Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt
b/Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt
new file mode 100644
index 0000000..3c0484c
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt
@@ -0,0 +1,15 @@
+VIA/Wondermedia VT8500 Realtime Clock Controller
+-----------------------------------------------------
+
+Required properties:
+- compatible : "via,vt8500-rtc"
+- reg : Should contain 1 register ranges(address and length)
+- interrupts : alarm interrupt
+
+Example:
+
+ rtc@d8100000 {
+ compatible = "via,vt8500-rtc";
+ reg = <0xd8100000 0x10000>;
+ interrupts = <48>;
+ };
diff --git a/Documentation/devicetree/bindings/tty/serial/via,vt8500-uart.txt
b/Documentation/devicetree/bindings/tty/serial/via,vt8500-uart.txt
new file mode 100644
index 0000000..3222502
--- /dev/null
+++ b/Documentation/devicetree/bindings/tty/serial/via,vt8500-uart.txt
@@ -0,0 +1,15 @@
+VIA/Wondermedia VT8500 UART Controller
+-----------------------------------------------------
+
+Required properties:
+- compatible : "via,vt8500-uart"
+- reg : Should contain 1 register ranges(address and length)
+- interrupts : UART interrupt
+
+Example:
+
+ uart@d8210000 {
+ compatible = "via,vt8500-uart";
+ reg = <0xd8210000 0x1040>;
+ interrupts = <47>;
+ };
diff --git a/Documentation/devicetree/bindings/usb/platform-uhci.txt
b/Documentation/devicetree/bindings/usb/platform-uhci.txt
new file mode 100644
index 0000000..a4fb071
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/platform-uhci.txt
@@ -0,0 +1,15 @@
+Generic Platform UHCI Controller
+-----------------------------------------------------
+
+Required properties:
+- compatible : "platform-uhci"
+- reg : Should contain 1 register ranges(address and length)
+- interrupts : UHCI controller interrupt
+
+Example:
+
+ uhci@d8007b00 {
+ compatible = "platform-uhci";
+ reg = <0xd8007b00 0x200>;
+ interrupts = <43>;
+ };
diff --git a/Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt
b/Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt
new file mode 100644
index 0000000..17b3ad1
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt
@@ -0,0 +1,15 @@
+VIA/Wondermedia VT8500 EHCI Controller
+-----------------------------------------------------
+
+Required properties:
+- compatible : "via,vt8500-ehci"
+- reg : Should contain 1 register ranges(address and length)
+- interrupts : ehci controller interrupt
+
+Example:
+
+ ehci@d8007900 {
+ compatible = "via,vt8500-ehci";
+ reg = <0xd8007900 0x200>;
+ interrupts = <43>;
+ };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt
b/Documentation/devicetree/bindings/vendor-prefixes.txt
index db4d3af..5c63da2 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -47,5 +47,7 @@ sirf SiRF Technology, Inc.
st STMicroelectronics
stericsson ST-Ericsson
ti Texas Instruments
+via VIA Technologies, Inc.
wlf Wolfson Microelectronics
+wm Wondermedia Technologies, Inc.
xlnx Xilinx
diff --git a/Documentation/devicetree/bindings/video/via,vt8500-fb.txt
b/Documentation/devicetree/bindings/video/via,vt8500-fb.txt
new file mode 100644
index 0000000..ccd15b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/via,vt8500-fb.txt
@@ -0,0 +1,46 @@
+VIA VT8500 Framebuffer
+-----------------------------------------------------
+
+Required properties:
+- compatible : "via,vt8500-fb"
+- reg : Should contain 1 register ranges(address and length)
+- interrupts : framebuffer controller interrupt
+
+Required nodes:
+- display: a display node is required to initialize the lcd panel
+ This should be in the board dts.
+
+Example:
+
+ fb@d800e400 {
+ compatible = "via,vt8500-fb";
+ reg = <0xd800e400 0x400>;
+ interrupts = <12>;
+ };
+
+VIA VT8500 Display
+-----------------------------------------------------
+Required properties:
+- xres : lcd panel horizontal resolution
+- yres : lcd panel vertical resolution
+- left-margin,
+- right-margin,
+- hsync-len: lcd panel horizontal timings in pixels
+- upper-margin,
+- lower-margin,
+- vsync-len: lcd panel verticals timings in pixels
+- bpp: lcd panel bit-depth.
+ <16> for RGB565, <32> for RGB888
+
+Example:
+ display {
+ xres = <800>;
+ yres = <480>;
+ left-margin = <88>;
+ right-margin = <40>;
+ hsync-len = <0>;
+ upper-margin = <32>;
+ lower-margin = <11>;
+ vsync-len = <1>;
+ bpp = <16>;
+ };
diff --git a/Documentation/devicetree/bindings/video/wm,prizm-ge-rops.txt
b/Documentation/devicetree/bindings/video/wm,prizm-ge-rops.txt
new file mode 100644
index 0000000..a850fa0
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/wm,prizm-ge-rops.txt
@@ -0,0 +1,13 @@
+VIA/Wondermedia Graphics Engine Controller
+-----------------------------------------------------
+
+Required properties:
+- compatible : "wm,prizm-ge-rops"
+- reg : Should contain 1 register ranges(address and length)
+
+Example:
+
+ ge_rops@d8050400 {
+ compatible = "wm,prizm-ge-rops";
+ reg = <0xd8050400 0x100>;
+ };
diff --git a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
new file mode 100644
index 0000000..ab67382
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
@@ -0,0 +1,20 @@
+Wondermedia WM8505 Framebuffer
+-----------------------------------------------------
+
+Required properties:
+- compatible : "wm,wm8505-fb"
+- reg : Should contain 1 register ranges(address and length)
+
+Required nodes:
+- display: a display node is required to initialize the lcd panel
+ This should be in the board dts. See definition in
+ Documentation/devicetree/bindings/video/via,vt8500-fb.txt
+
+
+Example:
+
+ fb@d8050800 {
+ compatible = "wm,wm8505-fb";
+ reg = <0xd8050800 0x200>;
+ };
+
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
